循环经济与浮法玻璃工艺的发展

在玻璃行业贯彻循环经济的理念,改进工艺思想和方法,节约资源,降低消耗,提高资源利用率,减少污染物排放,是我们对后人应负的责任和对地球应尽的义务。     

Interactions between Cytochrome c and DNA Strands Self-Assembled at Gold Electrode

In this work, we reported the investigation on the interaction between DNA strands self-assembled at gold electrodes and an electron transfer protein, cytochrome c. We observed that cytochrome c exhibited well-defined electrochemistry in both double-stranded and single-stranded DNA films. This suggested that the electron transfer reaction of cytochrome c arose possibly due to the electron hopping along DNA strands rather than wiring along the double helix. We also compared the heterogeneous electron transfer rate of cytochrome c with that of a ruthenium complex, which further confirmed this mechanism.     

Effect of alkali and ultraviolet (UV) radiation pretreatment on physical and mechanical properties of 1,6‐hexanediol diacrylate–grafted jute yarn by UV radiation

To improve the physicomechanical properties of jute yarn, grafting with 1,6‐hexanediol diacrylate (HDDA) monomer was performed by a UV radiation technique. A series of HDDA solutions of various concentrations in methanol were prepared. A small quantity of photoinitiator (Darocur‐1664) was also added to HDDA solutions. To optimize the conditions for grafting, the effects of monomer concentration, soaking time, and radiation doses were studied by varying the number of soaking times along with variation of monomer concentrations and UV radiation intensities. The extent of polymer loading and the mechanical properties like tensile strength (TS), elongation at break (Eb), and tensile modulus of both treated and untreated jute were investigated. The highest tensile strength, polymer loading, and modulus were achieved with 5% HDDA concentration, 5 min soaking time, and the 4th pass of UV radiation. This set of conditions was selected as optimum and produced enhanced tensile strength (67%), modulus (108%), and polymer loading (11%) over those of virgin fiber. To further improve the mechanical properties the jute yarns were pretreated with alkali (5% NaOH) solution and after that the alkali‐treated yarn were treated under UV radiation of various intensities. The pretreated samples were grafted with optimized monomer concentration (5% HDDA). Increased properties of alkali + UV‐pretreated and grafted samples such as polymer loading (12%), tensile strength (103%), elongation at break (46%), and modulus (114%) were achieved over those of virgin jute yarn. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 18–24, 2004     

基于循环自相关的NC-OFDM信号参数的盲估计

在认知无线电(CR)环境中,频率资源不足的问题越来越严重,非连续正交频分复用（NC-OFDM）能够工作在非连续的频谱环境,针对NC-OFDM信号的参数估计重要问题,提出用循环自相关的方法。该方法首先分析循环平稳信号特点,然后根据NC-OFDM信号的循环自相关在循环频率α以及时延τ切面图具有离散谱线特征进行参数估计,最后对NC-OFDM信号的循环自相关进行数值仿真。仿真结果表明在低信噪比下,能有效估计NC-OFDM信号的参数及识别零前缀的正交频分复用信号（ZP-OFDM）,且实验证明关闭近90%的子载波数目,都能够实现NC-OFDM信号的参数的盲估计。     

A203型低温氨合成催化剂使用小结

对Ａ２０３型低温氨合成催化剂的使用进行总结，介绍了该催化剂的装填，升温还原情况及使用效果。     

花岗岩残积土-土工格栅界面的后循环剪切行为研究

花岗岩残积土在华南、东南沿海、南岳、新疆等地区广泛分布,前人的研究多集中在结构性及微观特性上,后循环加载、位移演化、土壤密度等因素对筋-土界面的剪切特性及加筋作用效果的影响评估研究较少。从循环试验剪切刚度这一重要参数入手,以加载次数、加载频率值、位移振幅值、土壤重度值为自变量,应用控制变量法,通过设计循环直剪试验,得到加筋花岗岩残积土的剪切应力与剪切位移、垂直位移与剪切位移关系曲线进行观察对比,结果表明:花岗岩残积土土工格栅界面剪切刚度受位移半振幅、土壤干重度影响很大,受加载频率影响很小,循环加载并没有弱化后循环界面剪切强度,剪切位移与位移半振幅呈负相关关系。     

设抗震增强体的桩基础力学特性的原位试验研究

在过去的大地震中,许多桩基础因强烈振动和地基变形而遭受结构性破坏,因而提出一种既可以应用于新建桩基础,也可以应用于现有桩基础的抗震加固方法,即采用地基加固技术在桩基础中设置抗震增强体,以与桩基础的钢筋混凝土承台形成双层抗弯结构。采用等比例模型原位水平载荷试验和振动试验以及开挖检查等方法,对抗震加固的力学特性和构建质量进行加固前后的对比研究,进而证实了该加固方法的有效性和可行性,为同类工程起到了一定的参考意义。     

The Bromine Electrode. Part I: Adsorption Phenomena at Polycrystalline Platinum Electrodes

A cyclic voltammetric study of the behaviour of Br^– and Br^– ₃ at Pt electrodes, in the potential range between hydrogen and oxygen evolution, is described. Different experiments were carried out, in the presence of Br^– and Br^– ₃, in which the ratio between the species has been kept constant and equal to 1. The halide concentration was varied between 4 × 10^–6 and 1 × 10^–3 and mol dm^–3, at constant ionic strength, in 1 M HclO₄ as well as in 1 M NaClO₄ adjusted to a pH of 2. Underpotential deposition of Br is observed at potentials as low as –0.125 V vs SCE. The adsorption parameters of Br species were determined from the adsorption/desorption peak pair in the hydrogen adsorption/desorption region, and from the oxide reduction peak data. In the absence of oxygen adsorption, a relatively high coverage of the electrode surface is attained. A Langmuir-type adsorption is observed under the different experimental conditions.     

An economic–ecological model to evaluate impacts of nutrient abatement in the Baltic Sea

This paper presents a coupled economic–ecological model that integrates a catchment model with a marine model and incorporates economic data to analyse the long-term economic and ecological consequences of nutrient abatement in the Baltic Sea. The spatially explicit model describes dynamics of soil phosphorus in arable land, developments of nutrient concentrations and phytoplankton biomass in the sea basins, and inter-annual variation in nutrient loads and biophysical processes. The performance of the model is demonstrated by computing the least-cost solution to reach the good environmental state of the sea – as implied by the Baltic Sea Action Plan – within a time span of 40 years. The total cost of achieving this target is 1487 M€ annually. Spatially optimal allocation of load reductions differs from the load reduction targets of the Baltic Sea Action Plan, and focuses more on the control of phosphorus loads.     

纳米超强酸SO4^2TiO2催化合成苯乙酮环乙二缩酮

以纳米固体超强酸SO42-/TiO2为催化剂,通过苯乙酮和乙二醇反应合成苯乙酮环乙二缩酮。实验结果表明,纳米固体超强酸SO42-/TiO2是合成苯乙酮环乙二缩酮的良好催化剂,最佳反应条件如下:酮醇物质的量比为1∶1.2,催化剂用量为0.5g/0.1mol苯乙酮,反应时间为80min,产率可达99.3%。