Marmaray project: Tunnels and stations in BC contract

Istanbul is one of the most famous historical cities in the world. However, the project alignment selected as the best of a range of alignments cannot avoid passing beneath the historical and cultural heritages of Istanbul as well as under ancient and densely inhabited areas of the city. This paper will explain some of the challenges related to the bored tunnels.

Historical buildings are vulnerable. Yet many existing residential and office buildings are old and constructed on minimal foundations. As a consequence, it is vital that any drawdown of groundwater and any ground settlements have to be minimized.

In addition, the connection between the immersed and bored tunnels will be made directly and totally underground, without the usual intermediate shafts and beneath the deep waters of the Bosphorus Strait. This operation needs the utmost control of the tunnel excavation face to ensure its stability and to minimize water ingress. Based on such considerations, tunnel excavation by tunnel boring machine (TBM) using a slurry shield and having the ability to operate under high pore pressures was recommended as the method of excavation for the main running tunnels.

The paper will explain how the design team from Avrasyaconsult – the Employer’s Representative – arrived at the final minimum, specific and functional requirements of the bored tunneling works which are to be carried out using the ‘FIDIC EPC/Turnkey Project’ conditions.     

石膏制品防水防潮剂的研制与开发

本文提出采用高分子有机材料配合，生产石膏制品防水防潮剂的生产方法和工艺。该剂还可以应用到氧化镁系列板材，同时提出开发珠光或彩色防水防潮剂，能达到满足的装饰效果，值提开发推广。     

介绍《电工电子实践课程丛书》--东南大学电工电子系列实践课程教改成果之一

本文介绍由东南大学组织编写，东南大学出版社出版的《电工电子实践课程丛书》的编写背景，每本教材内容的简要内容，特色与使用情况。     

袖珍计算机放射性总量测量系统

本文介绍以PC-1500(A)型袖珍计算机为主体的地面放射性总量数据采集及处理系统的方案、硬件、软件及应用。     

Formation of geothermal resources at lithospheric subduction zones

This paper examines in a very broad fashion the formation of geothermal resources at lithospheric subduction zones. Regions of highly silicic calc-alkaline Quaternary volcanoes and/or plutons have been identified as prime candidates for having high-temperature hydrothermal systems. Regions of large tholeiitic Quaternary volcanoes have been identified as prime candidates for having large moderate-temperature hydrothermal systems. In addition, active magmatic, phreatomagnetic, and/or tectonic fracturing must be occurring in order to keep any moderate to high temperature hydrothermal system from chemically sealing. Connate, meteoric and/or oceanic water sources must also be present. Owing to tectonic and magmatic processes, volcanic arcs of subduction zones represent regions of the crust that have anomalously high mechanical and heat energy. Such arc regions are expected to contain significantly more moderate to high temperature hydrothermal systems than what is presently known. Many of these arcs are briefly discussed with respect to their potential for containing such resources.     

Simultaneous mass and heat transfer under mixed convection along a vertical cone

Steady laminar binary mixed convection flow along a vertical circular cone under the combined buoyancy effects of thermal and species diffusion is studied analytically. The analysis is confined to mass diffusion processes with low concentration levels. In the analysis the surface of the cone is assumed to be at a uniform temperature and uniform concentration. Numerical results for the local Sherwood number, local Nusselt number and local friction factor are presented. Representative temperature, concentration and velocity profiles are also shown. The analysis covers the diffusion of common gases and vapours into air. Considerations are given to the situations where the buoyancy forces assist and oppose the forced convection flow for various possible combinations of the thermal and species diffusion processes.     

Electrochemical,FTIR and morphological study of polypyrrole—Polystyrenesulphonate conducting films

The electrochemical behaviour, FTIR spectrum and the morphology of polypyrrole-polystyrenesulphonate (PPy-PSS) films obtained potentiostatically at 0.6 V in a 0.05m Py + 1.7 × 10^?2m NaPSS medium have been analysed. Different electrochemical parameters have been modified in order to establish the first polaron formation, the reversibility of the redox process and the doping mechanism. The FTIR spectrum confirms the existence of C?O groups in the film structure and two possible explanations are suggested. SEM reveals a higher homogeneity in these films than in PPy films doped with smaller counterions.     

Anaerobic digestion of alkaline black liquor using an up-flow anaerobic sludge blanket reactor

The anaerobic digestion of alkaline black liquor from a cereal straw pulping mill was studied in batch (serum bottles) and continuous systems (up-flow anaerobic sludge blanket reactor—UASB). The batch digestion studies confirmed that lignin and related compounds (LRC) in the alkaline black liquor were the main inhibitory substances and could not be decomposed by anaerobic bacteria. At organic loading rates of 5–10 kg COD m^?3 day^?1, the UASB reactor achieved 50–60% COD removal efficiencies. Gas production was 2–3 dm³ per dm³ of alkaline black liquor. Two different sludge types were examined in the reactor: granular and cluster-like sludges. Sludge in a cluster, which involved many small granules and flocs, tended to form larger aggregates and possessed good settling ability.     

宽频带函数波形产生器的研制

本文介绍以ＭＡＸ０３８为基础而研制的宽频带函数波形产生器，它可以产生２￣２×＾７Ｈｚ频率范围的正弦波、三角波、锯齿波和矩形波以及与它们同步的ＴＴＬ脉冲信号。     

Building a right digital twin with model engineering

In recent years, the concept of digital twin (DT) is attracting more and more attention from researchers and engineers. But there is still no consensus on what a right DT is. On one hand, some common models are renamed as DTs. On the other hand, some DTs extremely pursue ‘the same’ as physical objects, which bring unnecessary complexities to them. In this paper, we try to answer two questions from the point of view of model engineering: how to define a right digital twin, and how to build a right digital twin. The concept and related technologies of model engineering are introduced. Some basic principles and a set of metrics for a right DT are given. An evolutionary concurrent modeling method for DT (ECoM4DT) is proposed not only inheriting the theory from classic M&S methods but also highlighting the characteristics of DT compared with traditional models to systemically guide the DT modeling process.