多模复合制导数据融合器性能评估系统方案设计

从构建多模复合制导数据融合器性能评估系统的需求出发，详细介绍了多模复合制导数据融合器性能评估系统的构建方案，并从软硬件两个方面介绍了构建这样一个系统所需要注意的问题和解决办法．     

百色水库和龙滩水库淹没土地补偿概算单价比较

通过对百色水利枢纽和龙滩水电站土地补偿概算单价进行比较分析,找出控制土地补偿的关键因素,对 制定广西实施《大中型水利水电工程征地补偿和移民安置条例》办法和编制两工程调整概算,提供参考。     

Aggregate States and Energetic Disorder in Highly Ordered Nanostructures of para‐Sexiphenyl Grown by Hot Wall Epitaxy

We report on photoluminescence (PL) and thermally stimulated luminescence (TSL) in highly ordered nanostructures of para‐sexiphenyl (PSP) grown by hot wall epitaxy (HWE). A low‐energy broad band is observed in the PL spectra that can be attributed to the emission from molecular aggregates. While the intrinsic exciton emission in steady‐state PL dominates at low temperatures, the emission from aggregates increases with elevating temperature and its magnitude depends sensitively on film preparation conditions. Time‐resolved PL measurements showed that the aggregate emission decays with a life‐time of ≈ 4 ns, which is approximately an order of magnitude larger than the lifetime of singlet excitons. TSL data suggests the presence of an energetically disordered distribution of localized states for charge carriers in PSP films, which results from an intrinsic disorder in this material. A low‐temperature TSL peak with the maximum at around 30 K evidences for a weak energy disorder in PSP films, and has been interpreted in terms of a hopping model of TSL in disordered organic materials.     

THE STICKY ISSUES OF DRYING

Unconrolled agglomeration of particles and adhesion of the particulate mass to wall surfaces are common severe problems in many drying operations. This paper reviews the mechanisms of interparticle and particle-surface attraction as well as the theory and the existing tests for characterising powders in terms of internal strength, wall friction and adhesion. The usefulness of the information obtained from these tests in dryer design and operation is critically reviewed. The importance of powder stickiness in various types of dryers is discussed and established methods of combating the problem are presented Recommendations an made for further research in the area of powder cohesion and adhesion.     

强震区高拱坝抗震措施比较

在拱坝横缝中,设置跨横缝钢筋和阻尼器,可以在一定程度上控制高拱坝在强震作用下的横缝开度,增强拱坝整体性。以国内某高拱坝为例,基于在大型商业有限元分析软件ABAQUS平台上二次开发的拱坝有限元模型,结合已有的计算成果,系统比较了设置跨横缝钢筋和阻尼器的抗震效果,提出了两种措施组合的方案,可供工程应用参考。     

三峡三期大坝工程大体积温控技术综述

葛洲坝集团公司在三峡三期大坝工程大体积混凝土施工中加强过程控制，采用优化减水剂参量、采用低热水泥和高效减水剂控制出机口温度，供料浅降温、仓面降温和保温，通冷水等。并应用新材料、新工艺，实行精细化管理，从2003年8月开工至今，浇筑了200万m^3大体积混凝土术出现一条裂缝，保证了施工质量。     

变权组合预测模型在大坝安全监测中的应用

简要介绍了组合预测模型的基本原理，该模型改进了单一模型考虑因素的片面性，但常规的组合预测模型的权系数是固定的。考虑到各种模型的预测精度的变化，以及大坝安全监测数据存在的突变、时效等因素，固定权系数的组合预测模型有待进一步改进。文中提出了变权系数组合预测模型，并将其用于实际的大坝安全监测工程。结果表明，变权组合预测模型的预报精度高于其他模型。是一种值得推广的方法。     

混凝土大坝导温系数反演及其随时间变化的规律

随着时间的推移,混凝土的导温系数将发生变化,为了了解参数随时间的变化规律,利用原型观测资料对导温系数进行分段反演,从而拟合出大坝混凝土导温系数随时间的变化规律.     

糯扎渡心墙堆石坝心墙方案比较研究

糯扎渡工程在可行性研究阶段，比较了直心墙堆石坝和斜心墙堆石坝两种方案，分析表明，直心墙堆石坝在坝坡稳定性、坝体应力及抗震性方面均满足设计要求，且在地形地质条件、基础处理、抗震性能、施工方便性、工程造价等方面不同程度地优于斜心墙堆石坝，因此，设计最终选择直心墙堆石坝方案。     

可控环量船用翼的数值模拟和试验研究

本文提出一种可控环量船用翼数值模拟方法,其计算结果与最近Mclachlan的试验数据十分吻合。通过本文的计算,对广泛引用的Kind ＆ Maull的二维试验数据提出了修正。根据本文所作的三维可控环量帆翼的试验结果,与二维计算值的比较,指出它们之间所存在的显著差别。