真空行业现状及未来国内市场

简单扼要的概述了真空行业的发展历史，以较详细的统计数据阐述了2002年行业经济运行情况，并通过对相关行业“十五”发展规划的研究，对今后5～10年真空设备的市场进行了分析预测。     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

一种可调节电流的电流型PWM直流转换器

介绍一种用于驱动发光二极管(LED)的可调节电流的电流型PWM直流转换器.该直流转换器由于接有一个外接电阻,可以通过调节外接电阻的大小来调节输出电流.输出电流调节范围在5～40mA之间.主要分析了电路的输出电流调节功能,和这种输出电流可变的电流型PWM直流转换器的电流和电压反馈环的反馈实现原理.并简要介绍了这种带电流调节功能的PWM直流转换器的工作原理,最后给出了电路在输出不同电流时使用HSPICE软件对反馈参考电压,PWM锁存器输出波形的仿真结果.     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

氮化镓材料中的位错对材料物理性能的影响

氮化镓材料中的位错是制约GaN发光器件及电子器件的性能的一个关键因素。目前对于氮化镓材料中的位错的研究是一大热点。扼要综述了位错对于材料及器件的物理性能的影响：非辐射复合作用、造成器件的漏电流、缩短器件的寿命。并简要介绍了减少GaN外延层中的位错密度的几种方法。     

Effect of load ratio on the deformation behaviour of fatigue crack tips

To investigate the change in the manner of plastic deformation at a fatigue crack tip under different loading conditions, the fresh surface area which is produced in one fatigue cycle at the crack tip was measured by an electrochemical method under various load ratios. The fresh surface area produced in each fatigue cycle is in proportion to the crack propagation rate in the Paris regime. This indicates that the crack tip geometry at K_max maintains a similar profile through the Paris regime. Furthermore, the fresh surface area is independent of load ratio at a given da/dN in the Paris regime. This suggests that the shape of the fatigue crack tip at K_max should be independent of load ratio at a given da/dN, and that the shape at K_min is also independent of load ratio, whereas the size of the deformed region at the crack tip is in proportion to da/dN.     

镀锌钢带工艺技术改造

本介绍了将氰化钠镀锌溶液转换为氯化钾镀锌溶液的镀锌工艺过程，从工艺、健康、环保、成本等方面进行阐述。     

GPS在水面流速流向测量中的应用

传统的水面流速流向测量多采用经纬仪交会法,此法需要大量的人力和设备,工作量大且费时。近几年,随着全球定位系统(GPS)的广泛应用和实践,在一定范围内,采用GPS定位法替代经纬仪交会法施测水面流速流向。介绍了GPS定位法的测量原理、设备,以及测量方法。通过对GPS定位法的精度和优缺点的分析,得出采用GPS定位法施测水面流速流向具有较高的推广价值。     

Iodide mediated electrolysis of acidic coke/coal suspension

Hydrogen is among the emerging energy vectors that are being developed to replace nonrenewable hydrocarbon energy sources. The preferred method to produce hydrogen without generating greenhouse gases is the electrolysis of water using renewable energy. The reduction of energy during the water electrolysis process is a desirable goal regardless of the source of electric power. Similar to ferrous/ferric mediation, iodide can be used as a mediator in the electrolysis of an acidic suspension of coke or coal. The iodide ion is oxidized at a far lower anodic potential than the alternative oxygen evolution reaction. This reduces the cell electrolysis voltage and, consequently, reduces electricity use. The iodide consumed at the anode is continuously regenerated by chemical reaction with the coke/coal in suspension.     

14 kV single-phase superconducting fault current limiter based on YBCO films

We present the fabrication and short circuit test results of a 14 kV single-phase resistive superconducting fault current limiter (SFCL) based on YBa₂Cu₃O₇ (YBCO) films. Individual components were processed using the 4″ YBCO films and have the rated voltage and current of 600 V and 35 A at 77 K, respectively. Twenty four components, eight components in series and three lines in parallel, make a module having the rated voltage and current of 4.8 kV and 105 A, respectively. Three modules were assembled in series to produce the SFCL working at 77 K, a 14 kV single-phase machine for the 22.9 kV Y-Y grid. short circuit tests were successfully conducted in an accredited test facility with the maximum fault currents up to 14.1 kA_P. All components quenched together upon faults and shared the rated voltage evenly without any supplementary device between the modules. This proves that the SFCL based on YBCO films may not only work reliably at 22.9 kV, but also provide technical feasibility for higher voltage application including the transmission grids.