射频识别模块SMC51489在门禁系统中的应用

射频识别系统一般由三部分组成:电子标签(射频卡)、读取器和天线.正确快速的识别电子标签的标签号码,是门禁系统发挥其功能的先决条件.以无源低频射频卡识别模块SMC51489为例,介绍了对射频卡信息读取的原理和方法,并给出了相应的软件编程.实验证明该模块不仅具有较大的读卡距离,而且工作可靠.     

镍氢电池负极用低成本储氢合金的研究

研究了ABS型储氢合金在低Co含量条件下，随B组元替代元素Co，Al，Si等含量的变化对合金电化学性能的影响规律，同时研究了A组元中不同La／Ce比对合金电化学性能的影响情况。结果表明，随合金中Co含量的降低，合金的活化性能和放电容量得以改善，但合金的循环寿命下降也比较明显；在试验范围内，随Al元素的加入，合金的循环寿命得以改善，但材料的放电容量和活化性能均有所下降；随合金La／Ce比的降低，合金的放电容量略有下降，但其循环寿命和放电电压平台有较大提高。     

CPLD在雷达伺服轴角编码电路中的应用

介绍一种针对正、余弦旋转变压器—数字转换器(RDC)模块，用复杂可编程逻辑器件(CPLD)技术实现伺服轴角编码电路设计的方案。分析了轴角编码器系统中14XSZ系列旋转变压器—数字转换器的原理、轴角粗精组合原理及轴角纠错原理。详细介绍了CPLD的内部功能电路、CPLD轴角粗精组合和纠错实现电路，以及CPLD的工作时序图。提出了利用CPLD实现轴角粗精组合处理的方案，并通过了实际系统运行的考验，证明该方案可行。     

Fabrication of a poly-Si thin-film transistor with storage capacitor

The fabrication process of a low-temperature poly-Si thin-film transistor (TFT) with a storage capacitor was studied. The atmospheric-pressure chemical-vapour deposited SiO₂ protected the buried indium tin oxide (ITO) from reduction by a pure H₂ plasma treatment that was essential for the effective improvement of the poly-Si TFT characteristics. Thus, a storage capacitor with an ITO (picture electrode)-SiO₂-ITO (buried common electrode) structure was successfully fabricated. The poly-Si TFT with a channel width/length W/L ratio of 5 drove a 3 pF storage capacitor in 2 μs, and it showed superior driverability for LCD use. The TFT also had good hold characteristics under illumination for the realization of grey-scale representation.     

Estimating and eliminating redundant data transfers over the web: a fragment based approach

Redundant data transfers over the Web, can be mainly attributed to the repeated transfers of unchanged data. Web caches and Web proxies are some of the solutions that have been proposed, to deal with the issue of redundant data transfers. In this paper we focus on the efficient estimation and reduction of redundant data transfers over the Web. We first prove that a vast amount of redundant data is transferred in Web pages that are considered to carry fresh data. We show this by following an approach based on Web page fragmentation and manipulation. Web pages are broken down to fragments, based on specific criteria. We then deal with these fragments as independent constructors of the Web page and study their change patterns independently and in the context of the whole Web page. After the fragmentation process, we propose solutions for dealing with redundant data transfers. This paper has been based on our previous work on ‘Web Components’ but also on related work by other researchers. It utilises a proxy based, client/server architecture, and imposes changes to the algorithms executed on the Proxy server and on clients. We show that our proposed solution can considerably reduce the amount of redundant data transferred on the Web. Copyright © 2004 John Wiley & Sons, Ltd.     

Object data MODEL = object-oriented + semantic models

The term ‘object-oriented database’ has been used to refer to different characteristics and mechanisms supported by semantic databases and (behaviorally) object-oriented ones. While this indicates the current confusion due to the lack of a common model, it also suggests the potential desirability of combining these two kinds of modeling facilities into the same nutshell. This paper summarizes from these two paradigms the features common to both, the features influenced/adopted by each other, and the features which are presented in one paradigm but missing from the other. After a brief analysis and discussion of these features, we conclude this paper by proposing our major theme: a complete object data model should take the union of the facilities offered by these two kinds of models.     

Computer analysis,design and simulation of horizontal ground heat exchangers

This paper presents a new computerized procedure for dealing with the design of horizontal ground heat exchangers (HGHE). The computer program is based on the transient model of coupled nonlinear partial differential equations governing heat and mass flow in soils. The model is two-dimensional and delineates the operation of ground heat storage with the HGHE and such phenomena as freezing/thawing and drying/rewetting of soil moisture. Comprehensive climatological data, such as ambient temperature, solar radiation, wind velocity, rainfall, snowfall, snow characterstics, and water vapour pressure is used to simulate conditions at the ground surface over any required length of time. The package can be applied to any geographical location by changing climatic and soil data input. The designer has the possibility of selecting any of 12 types of soils from sand to clay, 12 commercial heat pumps, nine different configurations of the HGHE, 16 plastic pipes for ground coils, and 13 ground coil fluids. The program, however, does not calculate the length of the HGHE but it evaluates the thermodynamic performance of a ground heat pump system and provides comprehensive data on thermal and hydraulic conditions in ground heat storage. The length of the ground heat exchanger is obtained from a line source theory model or from site dimensions and pipe spacing. Computed results for ground heat exchanger operation correlate fairly well with experimental data. Simulation of temperature and moisture content in the ground for natural conditions (no heat extraction/deposition) showed a fair agreement with field data. The entire computer program is user-friendly, interactive, menu-driven, and written in FORTRAN 77.     

A portable cryo-storage system for low-temperature scanning electron microscopy,suitable for international transport of cryo-specimens

A cryo-specimen storage system for low-temperature scanning electron microscopy (LTSEM) specimens is described, which: liberates multi-specimen experiments from sampling restrictions imposed by the rate at which LTSEM specimens can be examined in the SEM; provides security against experiment loss resulting from breakdown of the SEM or cryo-system; enables collection of specimens in the field or in laboratories remote from the SEM laboratory; and facilitates international air transport of LTSEM specimens. The components of the system, which has a capacity of 98 stub-mounted specimens, are readily made in a laboratory workshop. The details of the design may be altered to suit particular specimen types or experimental approaches.     

地震数据采集系统中频谱均衡滤波器的理论设计

地层的高频吸收衰减效应是导致地震勘探分辨率不高的主要原因，在高分辨率野外地震数据系统中，频谱均衡滤波器所设置的重要部件。文章以频谱均衡滤波器的原理和地层吸收衰减特性为基础，用计算机模拟的方法研究地层吸收衰减使分辨率降低的程度和频谱均衡滤波器对分辨率的补偿效果，给出了较好的频谱均衡滤波器的设计方案。