光电摆角动态测量原理及其测量系统

本文阐述了用于测量物体摆角及摆心浮动量的光电动态实时测量原理,以及根据此原理研制的光电导弹喷管摆角动态测量系统。     

关于深冲薄钢板中的夹杂和成形性的商榷

对深冲薄钢板大生产的全工艺过程进行了跟踪，研究了ＷＹ０８ＡｌＡ薄钢板中Ａｌ＿２Ｏ＿３的形成，形态以及它们对冷轧成品的深冲性能和冲压小件的冲压成形废品率的影响。     

高强IF钢析出物的析出特征

高强ＩＦ钢是汽车用深冲钢板中深冲性能最好的高强度钢板。目前，国际上对该钢种的研究十分活跃。本文在实验条件下，通过对高强ＩＦ钢析出物的观察研究了高强ＩＦ钢析出物的析出特征，发现了新的析出相ＴｉＦｅＰ，并对磷对深冲性能影响的作用机制，进行了探讨。     

The effect of pre-wetting on dynamic contact angles

A roll-coating experimental system is used to study the effect of pre-wetting on dynamic contact angles, the interfacial displacement depth, and the associated phenomenon of air entrainment. The system consists of a roll, which is horizontally rotating in a liquid pool. The dynamic contact angle is recorded by a macrophotography system. The test liquids are glycerol solutions with viscosities in the range 104 < μ < 748 mPa · s. The value of (μV/ρg)^0.5 is taken as the characteristic length to be used in the dimensionless relationships which correlate experimental measurements. The effect of base layer entry angle into the liquid pool on the dynamic contact angles and other flow parameters is studied. Comparison is made with measurements in dry tape-coating and other pre-wet roll–coating systems.     

雁翎油田注氮气提高采收率工艺技术

在现有的提高采收率方法中,注气驱是应用较广、效果较好的方法,特别是注氮气驱由于其气源广泛、价廉经济、无腐蚀性,以及要求的油藏地质结构特征和原油的物理性质等因素的变化范围广泛等特产,这种提高采收率的方法应用的最为普及,代表了目前提高采收率的发展方向。结合雁翎油田实例,简要介绍了注氮气提高采收率的机理、注气井组建设、制氮工艺及注气后的采油完井方式、方法。     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255     

钻杆防磨技术的现状和发展

在深井超深井勘探过程中，由于径向力、涡动、横向振动等因素的存在，随着钻井时间的增长，钻柱作用于套管内壁的侧向力增大，导致套管磨损的问题越来越严重。介绍了近年来钻杆防磨技术的发展，主要从钻杆接头表面处理和钻杆保护器2方面来研究防磨减磨措施的现状和发展。     

砂岩油藏注水井深部酸化技术

吐哈油田长期注水开发后,注入水外源性伤害和地层内源性伤害不断在地层深部累积,采用常规酸化措施效果不理想。为此,通过长岩心污染模拟实验,研究了深部污染的污染特征及酸化解堵机理,通过解堵液缓速和工艺过程的综合应用实现深部解堵。应用AcidGuide专家系统对单井进行全面的污染诊断分析,并进行了参数优化设计,形成了适应吐哈油田深部酸化解堵的技术体系,现场应用取得良好效果,为类似低渗透油藏水井增注措施提供参考。     

大坝水平位移监控指标拟定的混合法

用混合法拟定了大坝水平位移的监控指标，即通过结构分析和建立数值 模型，计算大坝水平位移的水压分量和给定概率水平下的温度分量极值，进而拟定水平位移 监控指标，并给出了实例。     

大坝变形自动监测仪器

混凝土大坝的变形,尤其是坝基和拱座的变形,是衡量工程安全与否的一个重要指标。变形自动监测仪器与人工测读的仪器相比,具有精度高、时间快的优点。本文参考国外资料,提出测斜仪、钻孔变位计、垂线自动监测仪等三种国内外正在试用的电子仪器。将有助于提高并改善大坝设计的经济性和安全性。