裂纹对石墨烯拉伸力学性能影响的数值仿真

为研究裂纹对石墨烯力学性能的影响,以锯齿型石墨烯为研究对象,基于分子动力学方法,采用Tersoff势函数分析裂纹长度对石墨烯拉伸力学性能的影响以及含有裂纹的石墨烯在不同应变率下的拉伸变形破坏过程.结果表明,裂纹长度的增加大大减小石墨烯的抗拉强度和抗拉应变,对弹性模量有一定影响;裂纹降低石墨烯的抗拉应变对应变率的敏感性,但对于含有裂纹的石墨烯,仍可以增大加载速率来提高石墨烯的抗拉性能.     

反应堆堆芯围筒结构热流固耦合热变形分析

针对反应堆堆芯围筒热流固耦合问题,采用三维有限元法研究堆芯围筒的热变形.考察ANSYS的三维实体热单元SOLID 70,三维实体单元SOLID 45,三维表面热效应单元SURF 152和三维热-流耦合管单元FLUID 116等单元类型的特点和实用性.建立堆芯围筒、吊篮和冷却剂的温度分析有限元模型：堆芯围筒和吊篮采用SOLID 70,结构表面与冷却剂的对流传热表面采用SURF152,堆芯围筒与吊篮之间冷却剂采用FLUID 116.采用SOLID 45建立堆芯围筒有限元模型,根据得到的堆芯围筒、吊篮和冷却剂的温度场结果分析堆芯围筒热变形.结果表明,在考虑堆芯围筒及吊篮固体和流体的交叉耦合的基础上,采用三维有限元法能比较客观地模拟反应堆堆芯处的复杂运行环境.     

膨胀弯管在管道柔性设计中的定性分析

为防止管道因热胀冷缩、管道支撑或端点附加位移造成的应力问题,对管线中设置的膨胀弯管进行定性分析.通过2个参数的变化对膨胀弯管进行编号得到多种设计方案,用ANSYS建立管道的有限元模型,并分析各方案中膨胀管道的变形、应力和弯矩等;根据分析结果对膨胀弯管设计半径、设置位置和形状进行定性分析.该定性分析结果可为膨胀弯管概念设计和管道柔性设计提供参考.     

一种基于光照变化补偿的颜色识别方法

针对RoboCup中型组足球机器人比赛中光照变化会使颜色发生色彩漂移,影响颜色识别的准确性问题,提出一种基于光照变化补偿的颜色识别方法。该方法首先利用球的历史信息预测球的位置,然后在较小的区域内用基于色调直方图反向投影的方法找到球后,通过球的亮度直方图的变化计算出光照变化率,用于动态补偿颜色查找表。实验表明该方法能提高颜色识别的光照自适应性。     

基于山区地质灾害危险性分区的建设用地适宜性评价

地质灾害是建设用地选址时考虑的关键因素之一,也是危险性区划的主要参考要素,其直接或间接危害到人类安全并给社会和经济建设造成重大损失。为了降低建设用地规划中地质灾害的影响,应将地质灾害危险性分区考虑到建设用地适宜性评价当中。以干旱河谷山区丹巴县为研究区,运用确定系数和逻辑回归相结合的方法,构建地质灾害危险性评价体系对该区进行地质灾害危险性分区。选择安全因子、自然因子、社会因子和生态因子共同构成建设用地适宜性评价指标体系,利用层次分析法对研究区进行建设用地适宜性评价。结果表明:(1)对丹巴县进行危险性分区,极高危险区217.20km2,高危险区744.95km2,中度危险区1352.44km2,低度危险区1295.08km2以及极低危险区875.32km2。(2)丹巴县建设用地最适宜区面积为115.72km2,占县域总面积的2.57%,适宜建设的土地少且多集中在小金川、革什扎河、东谷河和大渡河沿岸河谷地区。较适宜区、基本适宜区、较不适宜区和禁止建设区面积分别为683.47km2、623.21km2、590.66km2、2494.21km2。(3)已建成的城镇空间中38.50%和37.62%分布在最适宜区和较适宜区,整体分布状况良好。有5.85%的城镇空间建设在较不适宜区,2.67%在禁止建设区,存在生态安全风险,该区域应加强灾害预警与防灾减灾工作,有条件地适度搬迁。     

土石坝工程领域的若干创新与发展

我国高土石坝数量居世界之首,保证高坝大库建设与长期运行安全是国家经济和公共安全保障的重大需求。系统总结了长江科学院近年来在土石坝工程领域的若干创新与发展。提出了基于“旁压模量当量密度法”的粗粒料级配相似理论试验方法;介绍了研发的系列CT三轴仪,实现了粗粒料组构要素的定量测量;提出了三轴试验中加载板与试样之间由滑动摩擦变为滚动摩擦、整体式接触变为分散式接触的减摩新方法,研发了相关减摩装置;研制了大尺寸、高压力、微摩擦、刚柔复合加载的土工真三轴仪;揭示了粗粒料真实三维应力条件下的强度与变形变化规律、湿化与蠕变变形特性;构建了粗粒料三参量非线性K-K-G剪胀模型、六参数湿化模型、九参数蠕变数学模型及相应的参数确定方法;基于当量密度法的原创思想,提出了利用旁压试验间接确定超百米级深厚覆盖层现场密度的试验方法。上述研究成果可为高土石坝工程建设提供重要科技支撑。     

基于极限学习机的堤防工程多元风险指标评价方法

为提高堤防工程风险评价的准确性,提出了基于极限学习机的堤防工程多元风险指标评价方法。首先,综合考虑影响堤防风险的28个评价指标,利用层次分析法从预警系统、堤防工程系统、环境系统和社会经济系统这4个方面建立了堤防工程多元风险评价指标体系。接着,基于极限学习机算法对28个指标进行标准化处理及分级标准构建,以风险指标作为输入量,分级隶属度作为输出量,划分风险等级,量化评价指标,估计多元风险评价指标值和判断风险的严重程度。最后,依托鄱阳湖重点堤防——康山大堤,构建多元风险评价指标体系,运用极限学习机算法计算多元风险评价指标值。评价结果表明:康山大堤目前处于基本安全水平,符合康山大堤经过两次加固后的工程实际情况,并与其他方法进行对比,验证了提出方法的可靠性和有效性。该方法可拓展应用到其他重要水工结构工程风险评估中。     

电力工程中的地质灾害危险性评估

我国幅员辽阔,地质环境条件多样且复杂,导致了地质灾害发育强烈,种类繁多、危害较大。地质灾害与工程建设活动密切相关,既相互作用,相互依存,又相互影响[1]。电力工程项目遍布全国,特别是输电线路大多为人烟稀少的山区分布,线路长,跨越的地质地貌区域复杂,存在的地质灾害多种多样,或多或少面临着各种地质灾害的严重威胁[2]。通过电力工程地质灾害危险性评估工作的现状及评估工作流程的介绍,进一步分析电力工程地质灾害的危险性评估工作中存在的问题并提出了相应的看法。     

Environmental Perception with Spatial Regularization Correlation Filter for Visual Tracking

With the introduction of correlation filtering (CF), the performance of visual object tracking is significantly improved. Circular shifts collecting samples is a key component of the CF tracker, and it also causes negative boundary effects. Most trackers add spatial regularization to alleviate boundary effects well. However, these trackers ignore the effect of environmental changes on tracking performance, and the filter discriminates poorly in the background interference. Here, to break these limitations, we propose a new correlation filter model, namely Environmental Perception with Spatial Regularization Correlation Filter for Visual Tracking. Specifically, we use the Average Peak to Correlation Energy (APCE) and the response value error between the two frames together to perceive environmental changes, which adjusts the learning rate to make the template more adaptable to environmental changes. To enhance the discriminatory capability of the filter, we use real background information as negative samples to train the filter model. In addition, the introduction of the regular term destroys the closed solution of CF, and this problem can be effectively solved by the use of the alternating direction method of multipliers (ADMM). Extensive experimental evaluations on three large tracking benchmarks are performed, which demonstrate the good performance of the proposed method over some of the state-of-the-art trackers.     

Forest harvesting in rural properties: Risks and worsening to the worker’s health under the ergonomics approach

Through an ergonomic approach, this study aimed to evaluate whether workers involved in forest harvesting activities in rural properties are subject to the development of work-related diseases, as well as their consequences. A cross-sectional study with 267 forest workers in rural properties in the Brazilian Central region was used. The following evaluations were performed for each of the activities (felling, delimbing, tracing, manual extraction and manual loading): physical workload evaluation; biomechanical evaluation; risk of repetitive strain injuries/work-related musculoskeletal disorders; environmental noise and vibration factors, where relevant, and thermal overload through the Wetbulb Globe Temperature index. The results showed that in general the physical workload was very high, exceeding the cardiovascular load limits and adding to the need for work reorganization. All activities exposed workers to serious and imminent risks of developing injuries to the spine and lower limbs. Likewise, in general the risk of the appearance of RSI/WMSDs was very high for all activities evaluated. Such results are due to the combination of organizational work factors and factors of the work environment such as exposure to bad weather, uneven terrain, lifting and handling loads above tolerable limits, excessive noise and thermal overload. All of this allows to conclude that ergonomic risks and workers’ health hazards in forest harvesting in rural properties are latent and very worrying, and that these workers are exposed to a form of labor exploitation that invariably leads to physical and emotional exhaustion and therefore to their decreased labor capacity and useful working life.