水泥浆失水制约下套管与井眼间隙的研究

通过对水泥浆失水规律的室内试验分析以厦对注水泥顶替过程中水泥浆失水桥堵套管与井眼间隙问题的研究，建立了顶替过程中滤失层不发生水泥浆失水而桥堵环形空间的临界失水量计算模型，提出了调配水泥浆失水性能和确定合理套管井眼间隙的具体方法，对注水泥现场施工和井身结构设计具有一定的指导意义。     

DISPERSION COMPENSATION CFBG IN100km 10Gbit／s RECIRCULATING SYSTEMS

A 10Gbit/s recirculating system is configured with Chirped Fiber Bragg Grating (CFBG) for the dispersion compensation. For the first time, the transmission distance in the loop reaches 1000km with bit error rate of 10-9. The effect of the group delay ripple of the fiber grating is also investigated in the recirculating systems, and it is shown that the transmission distance is limited to 4 cycles (4×167.1km ) in the loop with the power penalty fluctuation below 1.0dB. Thus the group delay ripple should be reduced to allow for the wavelength drift of±5GHz. At the end of this letter, the principles are given for designing long haul recirculating systems with dispersion compensation CFBG.     

渤海湾盆地石油地质储量和产量增长趋势的预测

渤海湾盆地的石油地质储量发现过程具有明显的渐进性、阶段性和长期性，石油产量的增长也具有一定的起伏性，用一个周期的单旋回哈伯特模型难以预测其发展趋势。通过分析渤海湾盆地的勘探开发历程，结合新一轮常规油气资源评价的结果，分别采用4个和3个哈伯特旋回拟合石油地质储量发现和产量增长曲线。预测结果显示，2005-2015年渤海湾盆地处于石油地质储量发现高峰期，2015年左右其石油产量达到高峰，之后处于下降趋势。实践证明，利用多旋回哈伯特模型对具有“多峰”特征的石油地质储量和产量的未来趋势进行预测是一种有效的方法。     

Fast handoff with reducing waste rate approach for wireless resources management in UMTS mobile networks

3G Wideband CDMA systems adopt the Orthogonal Variable Spreading Factor code tree as the channelization codes management for achieving high data rate transmission in personal multimedia communications. It assigns a single channelization code for each accepted connection. Nevertheless, it wastes the system capacity when the required rate is not powers of two of the basic rate. One good solution is to assign multiple codes for each accepted connection but it causes two inevitable drawbacks: long handoff delay and new call setup delay due to high complexity of processing with multiple channelization codes, and high cost of using more number of rake combiners. Especially, long handoff delay may result in more call dropping probability and higher Grade of Service, which will degrade significantly the utilization and revenue of the 3G cellular systems. Therefore, we propose herein an adaptive efficient codes determination algorithm based on the Markov Decision Process analysis approach to reduce the waste rate and reassignments significantly while providing fast handoff. Numerical results demonstrate that the proposed approach yields several advantages, including the lowest GOS, the least waste rate, and the least number of reassignments. Meanwhile, the optimal number of rake combiners is also analyzed in this paper. This research was supported in part by the National Science Council of Taiwan, ROC, under contract NSC-93-2213-E-324-018.     

Effect of Strain Rate on Discontinuous Flow and Mechanical Characteristics of High-Nitrogenous Steel

Experimental study on the effect of strain rate on discontinuous flow and mechanical characteristics of the high-nitrogenous steel Kh23AG19F has been performed. Within the range of strain rates from 4.62 · 10^-5 to 1.85 · 10 ^-4 s^-1, discontinuous flow, reflected by serration on the tensile diagram, is chiefly determined by intergranular deformation mechanisms. Under strain rates over 1.85 · 10^-2 s^-1, combined deformation modes prevail, which cause a change in the character of discontinuous flow and transform a serrated tensile diagram into a wavy graph, with the yield stress of steel increased significantly.     

The effect of ionic cross-links on the deformation behavior of homoblends made of poly(styrene-co-styrenesulfonic acid) and poly(styrene-co-4-vinylpyridine)

Deformation behavior of stoichiometric blends made from poly(styrene-co-styrenesulfonic acid) (SPS) and poly(styrene-co-4-vinylpyridine) (SVP) was investigated by TEM observation of strained thin films. An FTIR investigation revealed that ionic cross-links were formed between the component polymers upon blending due to intermolecular ion-ion interactions, which arose from proton transfer from sulfonic acid groups to pyridine groups. TEM observations indicate that the deformation mode of the blends changed from crazing only to crazing plus shear deformation, with the shear contribution becoming larger, as the ion content in the blends increased. Such changes in deformation mode can be understood as arising from an increase in the ‘effective’ strand density due to the formation of ionic cross-links upon blending. It was also found that the ionic cross-links via pyridinium cation/sulfonate anion ion pairs were more effective in inducing the transition of deformation mode than ionic cross-links via -SO₃⁻/Na⁺ or -SO₃⁻/Ca²⁺ ion pairs.     

能源实时监控与信息管理系统出现的问题及解决的方法

中国石化北京燕化石油化工股份有限公司动力事业部二供水车间电气改造完成后，能源实时监控与信息管理系统出现线路名称不统一、电流互感系数变比不起作用、数据查询功能及统计报表数据的准确性等问题，严重地影响系统的使用。通过对比分析，找到了出现问题的实质，对源代码进行修改，问题得到了解决。同时也成功地解决了其他部门遇到相类似的问题。     

管道风险管理方法研究

按照管道风险管理的流程分别对管道风险评价、风险控制和决策支持、效能测试和响应进行了论述。针对目前国内管道行业的情况，提出了进行管道风险评价的有效方法及维护措施。着重介绍了国外管道风险可接受标准的情况，作为国内制定管道风险评价标准的参考。     

国际石油合同中的风险与对策

石油公司从事跨国石油勘探开发活动，必然受到国际石油合同的影响和制约。国际石油合同包括租让制合同、产品分成合同、风险服务合同、回购合同、联合经营和国家石油公司私有化6类。石油合同风险分为地质风险、技术风险、财务风险、商业风险和政治风险5种类型。通过全面分析国际石油合同及其风险的类型和特点，认为在油气勘探开发项目的不同阶段风险管理的重点不同，石油公司必须建立科学的投资决策程序，采取定量与定性相结合的风险分析和投资决策方法，合理利用资源国财税制度等措施规避和降低风险，对中国的石油公司从事跨国石油勘探开发具有重要意义。     

低勘探程度区域油气资源评价方法

目前中国油气资源勘探和开发面临后备可采储量不足，低勘探程度区域受到重视。为了提高低勘探程度区域的资源评价精度，在前人评价的基础上，通过研究并利用勘探程度较高区域的资源评价结果，求准低勘探程度区域的油气聚集量，进而模拟求出其烃排聚系数、储量密度系数、单储系数和单生系数等关键参数，提出了利用练台地质推断法对低勘探程度区域进行评价，并对该方法评价的风险进行了分析。综合地质推断法的成果更能准确反映一个盆地、坳（凹）陷或区带的油气潜力及其分布特征。