超细分子筛材料的合成与应用研究进展

综述了近几年超细分子筛的合成与应用方面的研究进展,重点介绍了几种常用且研究较多的分子筛,主要包括Y,ZSM-5,β,Silicalite-1,ZSM-35,MCM-22等分子筛。对超细分子筛的合成方法及其在石化、环保和生物等领域的应用进行了介绍,并对分子筛复合材料的研究及应用的最新动态进行了评述,说明超细分子筛材料的应用领域仍在不断拓宽,超细分子筛复合材料的研究将会成为分子筛材料领域未来的重要发展方向。     

Application of degradation kinetics to the rheology of poly(hydroxyalkanoates)

The time‐dependent rheological behavior of a series of 3‐hydroxybuytrate‐based semicrystalline copolymers is employed to determine the expected rheological curves that would be generated in the absence of any polymer degradation. Both dynamic frequency sweep and shear rate sweep experiments were analyzed. A model for the degradation kinetics, coupled with standard rheological relationships, was employed to extrapolate the measured sweeps to predicted curves at time zero, prior to degradation. The model is broadly applicable over a wide range of frequencies or shear rates, and generates a single degradation rate constant k for each polymer studied. A similar, although ad hoc, procedure was applied to the dynamic storage and loss moduli. The model provides a method for determining the rheological behavior of degrading polymers over a time interval, typically found in processing applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1794–1802, 2006     

Preparations of nanosized TiO2 in reverse microemulsion and their photocatalytic activity

Nanosized titania sol has been produced by the controlled hydrolysis of titanium tetraisopropoxide (TTIP) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. The physical properties, such as surface area, crystallite size and crystallinity according to R and W₀ ratio, have been investigated by TEM, XRD, BET, FT–IR, TGA and DTA. In addition, the photocatalytic decomposition of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. It is shown that the anatase structure appears in the 300–600 °C calcination temperature range and the transformation of anatase into rutile starts above 700 °C. The crystallite size increases with increasing R and W₀ ratio but W₀ ratio shows a stronger effect on the crystallite size than R ratio. In the photocatalytic decomposition of p-nitrophenol, the photocatalytic activity is mainly determined by the crystallinity of titania. In addition, the titania calcined at 500 °C shows the highest activity on the photocatalytic decomposition of p-nitrophenol() and the pure anatase structure.     

Whey Drying on Porous Carriers

Whey is an undurable product. treated very often as a waste which pollutes the natural environment. Whey which is a valuable source of protein, lactose, vitamins and mineral salts should be utilized completely. The present paper is a proposal of whey drying on porous carriers. It is proved experimentally that the proposed drying method guarantees good product quality.     

高喷煤比操作对焦炭劣化的影响

为考查提高喷煤量对焦炭在炉内劣化的影响,在宝钢高炉上进行了风口取样研究.结果表明,喷煤量达到200 kg/t以上时焦炭劣化严重.高炉生产实绩回归显示,焦炭的热性能对高炉透气性的影响比冷强度显著.分析认为焦炭热性能指标CRI、CSR对高炉高煤比操作更重要.借此还提出了提高喷煤量和改善焦炭质量需加强研究的课题.     

两种在用发动机油氧化衰变情况监控方法对比分析

分析了两种常用监控在用发动机油氧化衰变情况的试验方法，并通过监控试验数据，探讨酸值和红外两种监测方法的各自特点，提出高档发动机油酸值变化极限值应区别于中低档发动机油的观点，为今后监控在用发动机油选用合适的试验方法和标准提供了参考。     

Alkylated ureas: mineralization and evaluation as N sources

An incubation experiment was conducted for 11 weeks to study the mineralization of ten alkylated ureas and urea in soil. Six of the alkylated ureas viz. methylurea(MU), 1,3-dimethylurea(1,3DMU), 1,1-dimethylurea(1,1DMU), ethylurea(EU), 1,3-diethylurea(1,3DEU) and butylurea(BU) and urea mineralized during the experiment. Urea mineralized immediately, while alkylated ureas mineralized after an incubation period ranging from less than a week to four weeks (delay period of mineralization). The delay period increased in the following sequence MU < 1,3DMU < EU < BU < 1,1DMU < 1,3DEU, but after the delay period was over the compounds mineralized almost as rapidly as urea. The delay period varied according to the number of carbon atoms in the alkyl group and their position with respect to each other on the molecule. It appeared to be specific for each compound and was apparently not influenced by the presence of urea or other alkylated ureas. This character can be used to develop mixture of various alkylated ureas to obtain N mineralization at the desired time. Rapid evolution of CO₂ and N₂O was observed during the mineralization of urea as well as alkylated ureas. Increase in soil pH was also observed during this period. The simultaneous ocurrence of these events suggested the formation of urea as an intermediate during the mieralization of alkylated ureas. None of the alkylated ureas showed adverse affect on emergence of wheat seedlings and except DEU and BU at high concentration no other alkylated urea showed any adverse effect on initial growth of wheat seedlings.     

A novel deep learning scheme for multi-condition remaining useful life prediction of rolling element bearings

The remaining useful life (RUL) prediction of a rolling element bearing is important for more reasonable maintenance of machinery and equipment. Generally, the information of a failure can hardly be acquired in advance while running and the degradation process varies in terms of different faults. Thus, fault identification is indispensable for a multi-condition RUL prediction, where, however, the fault identification and RUL prediction are separated in most studies. A new hybrid scheme is proposed in this paper for the multi-condition RUL prediction of rolling element bearings. The proposed scheme contains both classification and regression, where the 2D-DCNN based classifier and predictors are built concerning typical fault conditions of a bearing. For the online prediction, the raw signals are spanned in the time-frequency domain and then transferred into images as the input of the scheme. The classifier is used to monitor the vibration of rolling bearings for online fault recognition and excite the corresponding predictor for RUL prediction once a fault is detected. The output from the predictor is amended by the proposed adaptive delay correction method as the final prediction results. A demonstration is performed based on the XJTU-SY datasets and the results are compared with those from the state-of-the-art methods, which proves the superiority of the proposed scheme in improving the accuracy and linearity of RUL prediction. The time cost of the proposed online prediction scheme is also investigated and the results indicate high time effectiveness.     

一株秸秆纤维素降解菌株的筛选及其降解特性

纤维素是自然界一种最重要的可再生资源,本文从玉米地土壤中分离出 1 株产纤维素酶能力较强的菌株J-N3。以羧甲基纤维素为唯一碳源的分离培养基和刚果红染色法进行初筛,再将筛选到的菌株进行液体发酵培养并测定酶活。结合形态学特征与分子生物学鉴定结果得知,菌株J-N3为芽孢杆菌属( Bacillus)。并对其酶学性质进行初步研究,得到酶最适pH为6.0时,最适反应温度为50 ℃。玉米秸秆经菌株 J-N3处理20 d 时,秸秆失重率及纤维素分解率分别达到26.22%、31.01%。     

唑螨酯的毒性及研究进展

唑螨酯是一种高效、广谱、非内吸性的苯氧基吡唑类杀螨剂,广泛用于果蔬害螨防治。但近年来因为不合理使用导致残留及安全性问题。笔者综述了唑螨酯的应用、残留、代谢降解及毒性研究进展,以期对后续研究提供参考。