回顶法灌注混凝土浆成桩工艺

探讨了回顶法灌注混凝土浆的成桩工艺，分析了影响混凝土浆灌注质量的主要因素，并给出了相应的技术参数和措施。     

Sirius叠前深度偏移在莺歌海盆地“泥拱模糊带”处理中的应用

在对Sirius叠前深度偏移软件应用开发的基础上,分析讨论了Sirius 2D叠前深度偏移速度模型建立、层析成像及演、叠前深度偏移以及深度聚焦等技术环节的基本原理,并以莺歌海盆地某测线的处理为例,具体分析了Sirius 2D叠前深度偏移处理的流程、主要参数及时效.文中还分析讨论了莺歌海盆地中央“泥拱带”叠前深度偏移处理的地质效果.实践表明,莺歌海盆地广泛发育的与“泥拱模糊带”有关的构造各有其特殊性,只有通过3D叠前深度偏移处理才能从根本上解决“泥拱模糊带”的成像问题.     

Disparity field and depth map coding for multiview 3D image generation

In the present paper techniques are examined for the coding of the depth map and disparity fields for stereo or multiview image communication applications. It is assumed that both the left and right channels of the multiview image sequence are coded using block- or object-based methods. A dynamic programming algorithm is used to estimate a disparity field between each stereo image pair. Depth is then estimated and occlusions are optionally detected, based on the estimated disparity fields. Spatial interpolation techniques are examined based on the disparity/depth information and the detection of occluded regions using either stereoscopic or trinocular camera configurations. It is seen that the presence of a third camera at the transmitter site improves the estimation of disparities, the detection of occlusions and the accuracy of the resulting spatial interpolation at the receiver. Various disparity field and depth map coding techniques are then proposed and evaluated, with emphasis given to the quality of the resulting intermediate images at the receiver site. Block-based and wireframe modeling techniques are examined for the coding of isolated depth or disparity map information. Further, 2D and 3D motion compensation techniques are evaluated for the coding of sequences of depth or disparity maps. The motion fields needed may be available as a byproduct of block-based or object-based coding of the intensity images. Experimental results are given for the evaluation of the performance of the proposed coding and spatial interpolation methods.     

Predictors of outcome in LAAM, buprenorphine, and methadone treatment for opioid dependence.

This study examined (1) predictors of treatment outcome for opioid-dependent participants in a single-site controlled trial comparing methadone, buprenorphine, and LAAM treatments and (2) the extent to which various subpopulations of patients may have more successful outcomes with each medication. The relationships between patient demographics, drug use history, and psychological status and outcome measures of treatment retention, opiate use, and cocaine use were assessed. We believe this study to be the first to demonstrate that predictors of treatment success appear to be largely similar in LAAM, buprenorphine, and methadone treatment for opioid dependence. We did not find any factors that would strongly guide selection of one medication over others. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

柳海矿运输大巷返修工程深部软岩支护设计研究

通过现场调查、室内试验以及理论分析,柳海矿运输大巷支护现状进行分析研究,总结破坏原因。根据现场工程地质条件、岩石特性和破坏特点,确定软岩变形力学机制为高应力膨胀性软岩,并提出采用预留刚隙柔层支护技术进行支护。     

Effects of molybdenum additions on the structure, depth, and austenite grain size of the case of carburized 0.13% carbon steels

Carbon (0.13%) steel samples containing about 0.48% molybdenum (Mo) singly and in combination with nickel (Ni) were carburized in a natural Titas gas atmosphere at a temperature of 1223 K (950 °C) and at a pressure of about 0.10 MPa (15 psia) for time periods ranging from 1–4 h followed by slow cooling in the furnace. Their microstructure was studied by optical microscopy. The austenite grain size of the case and the case depths were determined. It was found that Mo and Ni alone and in combination decrease the thickness of the cementite network near the surface of the carburized case of the steels. However, Ni is found to be more effective than Mo in decreasing the thickness of cementite network. Both Mo and Ni enhance the formation of Widmanstätten cementite plates at the grain boundary and within the grains near the surface of the carburized steels. However, Ni alone is more effective than Mo in the formation of Widmanstätten cementite plates. In the presence of Ni, Mo is much more effective in the formation of Widmanstätten cementite plates than Mo in absence of Ni. It was also revealed that both Mo and Ni increased the case depth. Ni is more effective than Mo in increasing the case depth. The combined effect of Mo and Ni is much greater than that of either Mo or Ni alone in increasing case depth. Mo as Mo carbide (Mo₂C) particles refined the austenite grain size of the carburized case. Ni in solution was not found to have any effect in restricting grain growth of austenite, but the presence of Ni enhances the austenite grain size refining effect of Mo in the carburized case.     

The temperature dependence of luminescence from a long-lasting phosphor exposed to ionizing radiation

The temperature dependence of luminescence from a long-lasting phosphor (LLP), SrAl₂O₄ : Eu²⁺,Dy³⁺, exposed to ionizing radiation has been measured to understand the LLP luminescence mechanism. Evaluation of the decay constants of the LLP exposed to -, β- or γ-rays at temperatures from 200 to 390 K showed that the decay constant is divided into four components ranging from 10⁻⁴ to 10⁻¹ s⁻¹ with activation energies of 0.02–0.35 eV.

Total luminous intensity from the LLP with changing irradiation temperature has its maximum value around the room temperature. Irradiation at elevated temperature (390 K) has the total luminescence pattern with monotonous decrease as temperature rises. As a result of evaluating the temperature dependence of luminescence, the luminescence mechanism is considered as follows:

Full-size image

 

On the dynamics of non-linear viscoelastic solids with material moduli that depend upon pressure

We investigate the dynamic response, of a generalization of an incompressible Kelvin-Voigt viscoelastic solid, whose viscosity depends on the pressure. Bodies with pressure-dependent material moduli have relevance to numerous technologically significant problems in geomechanics, the mechanics of granular media and powder compaction. We obtain analytical results for creep and recovery phenomena as well as solutions to the propagation of waves in such bodies. We are able to obtain explicit exact solutions that clearly illustrate the marked difference in the response of bodies with pressure-dependent material moduli as opposed to their counterparts whose moduli do not depend on the pressure. We also show that the governing equations for such materials can change type, and that their solutions exhibit singularities and localization.     

浅谈侧窗采光和门窗节能措施

充分利用天然光，改善门窗的绝热性能，是建筑节能的重点手段。     

Parallelization of WHILE loops on pipelined architectures

Modulo scheduling theory can be applied successfully to overlap Fortran DO loops on pipelined computers issuing multiple operations per cycle both with and without special loop architectural support. This paper shows that a broader class of loops—REPEAT-UNTIL, WHILE, and loops with more than one exit, in which the trip count is not known beforehand—can also be overlapped efficiently on multiple-issue pipelined machines. The approach is described with respect to a specific machine model, but it can be extended to other models. Special features in the architecture, as well as compiler representations for accelerating these loop constructs, are discussed. Performance results are presented for a few select examples.An earlier version of this paper was presented at Supercomputing '90.