时间模上二阶三-点边值问题的三个正解

运用Legget—Williams锥上的不动点定理,讨论时间模上的二阶非线性方程三一点边值问题至少有三个正解的存在性．     

异质环境下分布式系统数据交换研究

旨在研究异质环境下开发分布式系统时,如何解决所产生的通信数据类型不一致问题,并且以远程监测系统的服务器端和客户端分别采用Delphi7．0与VB6．0实现时。如何解决该问题为例做了详细的探讨。结果表明采用API函数CopyMemory可以很好的解决上述问题。     

跨文化交际中的词汇空缺现象分析

语言是跨文化交流中最主要的手段,而词汇又是语言中最活跃的因素。由于受各自民族文化的影响,在跨文化交际过程中,会出现词汇空缺现象,给跨文化交际带来障碍。研究词汇空缺现象,了解并掌握造成词汇空缺现象的原因,明白其内涵,就可以避免在跨文化交际中产生误解,减少障碍,从而使跨文化交际得以顺利进行。     

不同水位条件下渗渠集水能力砂槽试验与分析

通过不同水位条件下的傍河型浅薄含水层渗渠的集水量试验模拟,揭示了模拟傍河型浅薄含水层渗渠所傍河流的模拟水位高低与渗渠集水量大小的关系。采用砂槽模型进行模拟,在设计的4个特征水位的基础上进行了两组试验,并将其试验结果进行对比分析。研究表明,在一定条件下渗渠集水量的大小与模拟河流处的水位高低近似呈正比。     

Variability of complementary relationship and its mechanism on different time scales

In the complementary relationship (CR) between actual and potential evapotranspiration, wet envi- ronment evapotranspiration (Ew) is usually calculated using the Priestley-Taylor (P-T) equation. Based on the data obtained from 38 catchments of the Haihe River basin and the Weishan experiment site in Shandong Province of China, this study has found variations in the Priestley-Taylor parameter α (e.g. increase in values with increase in the amount of precipitation on annual scale, seasonal fluctuation noted t...     

配料秤信号传输方式的比较与应用

介绍6种配料秤信号传输方式,并进行比较,提出传统配料秤改造和新上配料秤时的推荐方案.     

Reconstruction of different scales of pore-fractures network of coal reservoir and its permeability prediction with Monte Carlo method

There are millimeter, micron and nanometer scales of pores and fractures in coal to describe different scales of coal pores and fissures communicating path and to quantitatively characterize their permeability. Such information provides an important basis for studying coalbed methane output mechanism. The pores and fissures in a large number of coal samples were observed and counted by scanning electron microscopy and optical microscopy. The probability distribution models of pore-fissure network were then established. Different scales of pore-fissures 2D network models were reconstructed by Monte Carlo method. The 2D seepage models were obtained through assignment zero method and using Matlab software. The effect of permeability on different scale pore-fractures network was obtained by two-dimensional seepage equation. Predicted permeability is compared with the measured ones. The results showed that the dominant order of different scale pore-fractures connected path from high to low is millimeter-sized fractures, seepage pores and micron-size fractures. The contribution of coal reservoir permeability from large to small is millimeter-size fractures, micron-size fractures and seepage pores. Different parameters in different scale pore-fractures are of different influence permeability.Reconstruction of different scale pore-fractures network can clearly display the connectivity of porefractures, which can provide a basis for selecting migration path and studying gas flow pattern.     

分离压对不同基底上含活性剂液滴铺展特征的影响

针对不同基底结构上含不溶性活性剂液滴的铺展过程,引入受活性剂浓度影响的分离压模型,应用润滑理论建立了液滴厚度和活性剂浓度演化方程组,通过数值计算得到了分离压作用下含活性剂液滴过程的演化特征。研究表明不考虑分离压时,最小液膜高度贴近壁面,诱发去润湿现象发生,基底不平整度增加加剧液膜变形;分离压作用下最小液膜高度显著上升,铺展前沿处衍生出的子波结构明显减少,铺展更加稳定;分离压具有抑制液膜表面变形促进液滴铺展的作用。     

闽江下游径流量和北港分流比变化及其对水龄的影响研究

利用闽江下游多年水文资料,分析了干流流量时空变化和北港分流比变化趋势,并借助EFDC模型研究水口水库下泄流量和北港分流比对闽江下游水体水龄的影响。分析表明:闽江干流径流量年际变化不均匀,北港分流比则经历了由小变大再变小的趋势。模拟的闽江水龄结果可知水龄与下泄流量成反比关系,北港分流比减小将增加北港水体交换时间,同时减少南港水体交换时间;水龄可以定量地描述污染物在北港河道的停留时间,为保障北港水源地水质安全,需要增大枯水期上游水口水库下泄流量和增大北港分流比。     

Stress analytical solution for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform distributed pressure

The stress state around circular openings,such as boreholes,shafts,and tunnels,is usually needed to be evaluated.Solutions for stresses,strains and ultimate bearing capacities of pressurized hollow cylinder are common cases.Stress analytical method for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform pressure on the outer surface and uniform radial pressure on the inner surface is given.The power series method of complex function is used.The stress analytical solution is obtained with the assumption that two layers of a cylinder are fully contacted.The distributions of normal and tangential contact stress along the interface,tangential stress on the inner boundary and stresses in the radial direction at θ=0,45 and 90,are obtained.An example indicates that,when the elastic modulus of the inner layer of a double-layered thick-walled cylinder is smaller than that of the outer layer,the tangential stress is smaller than that in the corresponding point for a traditional cylinder composed of homogeneous materials.In that way,stress concentration at the inner surface can be alleviated and the stress distribution is more uniform.This is a capable way to enhance the elastic ultimate bearing capacity of thick-walled cylinder.