非接触CPU卡在环保排污上的应用

为确保环保排污重要数据交互、存储的安全性以及后台系统与前端总量计量设备数据传输的安全性,本文结合现有的排污许可证制度,提出了将国密SM1加密算法非接触CPU卡作为信息载体在环保排污上的应用模式,并对目前在浙江省环保领域应用的具体案例进行了剖析.     

脉冲放电高能转化制备纳米粉体

综合介绍了脉冲电流通过细金属丝放电(pulsed wire discharge,PWD)制备纳米粉体的方法.讨论了影响纳米粉体,特别是晶粒尺寸的因素,以防止形成亚微米颗粒.因为达到电压峰值的丝的沉积能相当于丝的汽化能,因此,能夠计算出沉积能.随着所施加的能量增加,气体压力降低,介质气体的热扩散率增大,晶粒尺寸变小.在惰性气氛中,采用PWD工艺,由金属蒸气急冷可制备金属粉体.如果介质气体变为氧气或者氨气,就能制备氧化物、氮化物纳米粒子.要制备双金属合金、双氧化物或氮化物纳米粒子就必需采用双金属丝和不同的介质气体.采用PWD工艺,在有机气体或烟气中,能制备电磁屏蔽和导电浆料和其它用途的钝化纳米粒子.采用丝输送器而实现大量生产纳米粉体的PWD工艺一个实例证明了PWD工艺生产纳米粉体的可行性.     

Synthesis, isolation, spectroscopic and electrochemical characterization of some calcium-containing metallofullerenes

A few Ca-containing mono-metallofullerenes, i.e. Ca@C₇₆, Ca@C₈₈, Ca@C₉₀ (I, II), were synthesized by an improved DC arc discharge method and isolated by a multi-stage HPLC method for the first time. These isomer-separated metallofullerenes were characterized by LD-TOF MS and UV-vis-NIR spectrometry. Their HOMO-LUMO band gaps and possible molecular geometries are discussed according to the absorption spectra in this report. In addition, the cyclic and differential pulse voltammetry of Ca@C₇₆ was conducted in MeCN/C₆H₅CH₃ (1:4 v/v). The voltammograms of Ca@C₈₂ (II, III) and Ca@C₈₄ (II) were also recorded. Their electrochemical behaviors are discussed compared with those of corresponding ytterbium metallofullerenes. The features of the Ca metallofullerenes’ electronic structures are also discussed.     

Thermolysis of the polyyne C8H2 in hexane and methanol: Experimental and theoretical study

The mean lifetimes of polyyne C₈H₂ in hexane were determined at 50, 60, 80, and 100 °C and in methanol at 60 °C. The reactions are second order at all temperatures: ln k₂ = 20.5 ± 1.5-10303 ± 520T⁻¹ and the corresponding activation energy is 85.7 ± 6.3 kJ mol⁻¹ (7164 cm⁻¹). Extrapolation suggests that solutions at 1 mM concentration are significantly unstable at room temperature. Quantum chemical calculations show that polyynes C_mH₂ + C_nH₂ (m + n = 16) could be products, but these were not detected. Alternatively, C₁₆H₂ isomers could form. IR spectra of the solid residues from hexane and methanol solutions were obtained.     

Application of pulse discharge sintering (PDS) technique to rapid synthesis of Ti3SiC2 from Ti/Si/C powders

To synthesize Ti₃SiC₂ samples, pulse discharge sintering (PDS) technique was utilized to sinter elemental powders of Ti/Si/C with stoichiometric and off-stoichiometric ratios in a temperature range of 1200–1500 °C. The results showed that high purity Ti₃SiC₂ could not be obtained from the Ti/Si/C powder with molar ratio of 3:1:2, and Ti₃SiC₂ preferred to form at relatively low sintering temperature for a short time. When 5Ti/2Si/3C and 3Ti/1.5Si/2C powders were sintered for 15 min, the TiC content was respectively decreased to 6.4 and 10 wt.% at 1250–1300 °C. The corresponding relative density of the samples sintered from 5Ti/2Si/3C powder was calculated to be as high as 99% at the temperature above 1300 °C. It is suggested that low-temperature rapid synthesis of Ti₃SiC₂ would be possible through the PDS technique, provided that the composition of the starting powders should be adjusted to be off-stoichiometric ratio from 3:1:2.     

Charge/discharge characteristics of sulfur composite cathode materials in rechargeable lithium batteries

The charge and discharge characteristics of lithium batteries with sulfur composite cathodes have been investigated. The sulfur composites showed novel electrochemical characteristics. The analysis of the differential capacity indicated that the discharge process showed two voltage plateaus of 2.10 V and 1.88 V, and the charge process also presented two voltage plateaus of 2.22 V and 2.36 V. The overcharge test showed that the composite cannot be charged over 4.0 V, the voltage always stopped at about 3.9 V during charging, indicating that the composite presented the intrinsic safety for the overcharge of lithium batteries. The overcharge can cause serious safety problem for the conventional Li-ion batteries. The overcharge test also showed that the batteries with sulfur composite were destroyed when the upper cut-off voltage was over 3.6 V. However, the composite presented good reversible capacity after it was deep discharged even to 0 V. It showed stable cycleability and high cycling capacity of 1000 mAh g⁻¹ when cycling between 0.1 V and 3.0 V, indicative of the different characteristic from the conventional oxide cathode materials. The prototype polymer battery with the composite cathode material presented the energy density of 246 Wh kg⁻¹ and 401 Wh L⁻¹.     

Temperature and catalyst effects on the production of amorphous carbon nanotubes by a modified arc discharge

Large amounts of amorphous carbon nanotubes (ACNTs) were prepared with Co-Ni alloy powders as catalyst in hydrogen gas atmosphere by a modified arc discharging furnace which can control temperature during the electric arcing process. The experimental results indicate that the cooperative function of temperature and catalyst plays an important role in the soot production rate and the relative ACNT purity. When temperature increases from 25 °C to 700 °C, the soot production rate increases from around 1 g/h to 8 g/h, the best relative ACNT purity at 600 °C can reach up to 99% compared to the room temperature sample. Without catalyst, only plate graphite is formed at 25 °C and very few carbon nanotubes are found when temperature increases to 600 °C. TEM, SEM, HRTEM and XRD analysis showed that the as-prepared carbon nanotubes are almost amorphous. The soot production rate is 8 g/h and diameter range of amorphous carbon nanotubes is about 7-20 nm, respectively.     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

泄洪雨雾输运的数学模型研究

针对泄洪雨雾在河谷中的对流与沉降问题,提出一种3维有限元计算模型,该模型通过对浓度梯度矢的求解,可保证浓度计算的非负性与单调性.同时,根据气象学中雨滴谱函数与水滴沉降速度等概念,导出雨雾浓度与降雨强度间的定量转换关系,使其与其他雾化近区数学模型实现边界耦合.运用本文模型对瀑布沟电站泄洪洞雾化分布进行模拟,计算结果与真实的物理规律相一致,为今后类似工程问题的研究提供了适用手段.     

Investigation on film cooling characteristics from a row of converging slot-holes on flat plate

Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles (converging slot-hole) on a large-scale flat-plate model. The results show that the coolant flow from a row of consoles shows good lateral uniformity of adiabatic effectiveness, with regions of slightly enhanced cooling occurring between the consoles. For the console cooling geometry, the interaction between coolant jet from inclined console and the mainstream flow results in reasonable vo...