Discrete‐time output feedback for Markov jump systems with uncertain transition probabilities

This article addresses the output feedback control for discrete‐time Markov jump linear systems. With fully known transition probability, sufficient conditions for an internal model based controller design are obtained. For the case where the transition probabilities are uncertain and belong to a convex polytope with known vertices, we provide a sufficient LMI condition that guarantees the norm of the closed‐loop system is below a prescribed level. That condition can be improved through an iterative procedure. Additionally, we are able to deal with the case of cluster availability of the Markov mode, provided that some system matrices do not vary within a given cluster, an assumption that is suitable to deal with packet dropout models for networked control systems. A numerical example shows the applicability of the design and compares it with previous results. Copyright © 2012 John Wiley & Sons, Ltd.     

Signal-adaptive discrete evolutionary transform as a sparse time–frequency representation

Discrete evolutionary transform (DET) has usually been applied to signals in a blind-way without using any parameters to characterize the signal. For this reason, it is not optimal and needs improvement by using some information about the signal. In this paper, we propose an improvement for the discrete evolutionary transform in order to obtain a sparse representation and redefine the generalized time-bandwidth product optimal short-time Fourier transform as a special case of it. In case of linear FM-type signals, the optimized kernel function of the transform is determined according to signal parameters including the instantaneous frequency. The performance of the adaptive-DET is illustrated on three distinct cases. In case of multi-component LFM signals, when the concentration of the proposed distribution is compared to the ordinary sinusoidal-DET, the improvement is computed as 28% in terms of the ratio of norms. Furthermore we define a new and a general class of distribution functions named as the short-time generalized discrete Fourier transform (ST-GDFT) which is a larger set of signal representations including the adaptive-DET.     

Dynamic behavior of the discrete‐time double integrator with saturated locally stabilizing linear state feedback laws

The main contribution of this paper is to completely characterize the dynamic behavior of the discrete‐time double integrator with a saturated locally stabilizing linear state feedback law. In continuous‐time setting, any linear state feedback control law that locally stabilizes the double integrator also globally stabilizes the system in the presence of actuator saturation. In discrete‐time setting, the equivalent of the double integrator does not have the same property. In this paper, we completely characterize the global behavior of saturated locally stabilizing linear state feedback laws for the discrete‐time double integrator. Copyright © 2012 John Wiley & Sons, Ltd.     

黑河水库引水洞上部滑坡的稳定性数值模拟分析

以黑河引水洞上部滑坡为例,采用二维离散元软件对滑坡的变形过程进行了数值模拟,分别从应力、应变、塑性区分布等方面分析滑坡的变形特征,并对坡面一点的速率、位移情况进行监测,模拟结果与实际观测结果大体上是吻合的,离散元数值模拟在一定程度上反映了坡体变形破坏的总体趋势.     

基于DPSO的高校排课算法的实现

在对高校排课问题进行分析的基础上,提出一个基于DPSO的排课算法。算法采用矩阵编码方式。对粒子的位置和速度更新方法进行重新定义。利用C#语言实现了基于离散粒子群算法的排课系统,并以三个学院一个学期的课程表为依据对系统进行了评估,测试结果表明粒子群算法在排课系统中不仅解决了高校复杂的排课难题而且实现了智能化、人性化的排课过程,同时也验证了本系统的可用性。     

一种基于位纠错的MPEG-4视频盲水印算法

提出一种MPEG-4盲视频水印算法：二值水印图像经Arnold变换扩频并与伪随机序列调制后得到的水印信息相同地嵌入到每一视频帧Y分量的DCT低中颊系数中,通过水印住来调整这些系数的大小,然后根据它们对嵌入强度的余数范围来提取水印位,该算法简单易实现。实验结果表明：本算法具有很好的不可见性,并对JPEG压缩、涂改、椒盐噪声和剪切等攻击都有很好的鲁棒性。     

基于U-正交变换的图像编码算法

为了更有效地进行图像编码,先用U-正交函数系构造出一类新型的U-正交变换, 并以三次U-正交变换为例,研究了基于U-正交变换的图像编码算法。该编码算法首先通过离散U-正交函数系的基函数构造U-正交变换的变换矩阵,并根据U-正交矩阵的对称性给出了U-正交变换的快速算法; 然后应用三次U-正交变换对图像实施2维变换, 再用JPEG标准中的量化矩阵、Huffman码表与熵编码方法对图像的三次U-变换系数进行量化与编码, 实现了基于三次U-正交变换的图像编码算法。实验结果表明, 三次U-正交变换的编码增益、去相关效率与DCT基本相同,而编码效果却与JPEG编码效果非常接近, 且计算复杂度与基于FFT的快速DCT算法基本一致。由此可见, 应用U-正交变换对图像进行编码压缩是一类行之有效的方法,并有望在视频编码中得到应用。     

Performance bounds in linear control of unstable MIMO systems with pole location constraint

This paper proposes a methodology to compute quadratic performance bounds when the closed loop poles of a discrete-time multivariable control loop are confined to a disk, centred at the origin, and with radius less than one. The underlying philosophy in this constraint is to avoid certain undesirable dynamic features which arise in quadratic optimal designs. An expression for the performance loss due to the pole location constraint is also provided. Using numerical examples, we show that the performance loss is compensated by an improved transient performance, specially visible in the control signals.     

基于DNA计算自组装模型的Diffie-Hellman算法破译(英文)

DNA自组装计算模型是近年来引人关注的计算模型,已有基于自组装模型的二进制加法、乘法以及有限域中的加法和乘法的讨论．文中利用DNA自组装模型设计的模乘系统,实现了素数P的本原根g连续乘方后模p的数的排列,从而可以在线性时间内求解离散对数,为破译Diffie—Hellman密钥交换算法提供了新的生物方法．该模乘系统使用了Θ（p）种自组装类型,组装的时间复杂度为Θ（p-1）．系统最后组装结果提取出报告链后,经过PCR和凝胶电泳读取离散对数结果．该模型扩展了DNA自组装计算模型的应用,为求取离散对数提供了新思路．     

A new approach based on a discrete hidden Markov model using the Rocchio algorithm for the diagnosis of heart valve diseases

Abstract: Application of the Doppler ultrasound technique in the diagnosis of heart diseases has been increasing in the last decade since it is non‐invasive, practicable and reliable. In this study, a new approach based on the discrete hidden Markov model (DHMM) is proposed for the diagnosis of heart valve disorders. For the calculation of hidden Markov model (HMM) parameters according to the maximum likelihood approach, HMM parameters belonging to each class are calculated by using training samples that only belong to their own classes. In order to calculate the parameters of DHMMs, not only training samples of the related class but also training samples of other classes are included in the calculation. Therefore HMM parameters that reflect a class's characteristics are more represented than other class parameters. For this aim, the approach was to use a hybrid method by adapting the Rocchio algorithm. The proposed system was used in the classification of the Doppler signals obtained from aortic and mitral heart valves of 215 subjects. The performance of this classification approach was compared with the classification performances in previous studies which used the same data set and the efficiency of the new approach was tested. The total classification accuracy of the proposed approach (95.12%) is higher than the total accuracy rate of standard DHMM (94.31%), continuous HMM (93.5%) and support vector machine (92.67%) classifiers employed in our previous studies and comparable with the performance levels of classifications using artificial neural networks (95.12%) and fuzzy‐C‐means/CHMM (95.12%).