Augment low-field intra-operative MRI with preoperative MRI using a hybrid non-rigid registration method

Background

Preoperatively acquired diffusion tensor image (DTI) and blood oxygen level dependent (BOLD) have been proved to be effective in providing more anatomical and functional information; however, the brain deformation induced by brain shift and tumor resection severely impairs the correspondence between the image space and the patient space in image-guided neurosurgery.

Method

To address the brain deformation, we developed a hybrid non-rigid registration method to register high-field preoperative MRI with low-field intra-operative MRI in order to recover the deformation induced by brain shift and tumor resection. The registered DTI and BOLD are fused with low-field intra-operative MRI for image-guided neurosurgery.

Results

The proposed hybrid registration method was evaluated by comparing the landmarks predicted by the hybrid registration method with the landmarks identified in the low-field intra-operative MRI for 10 patients. The prediction error of the hybrid method is 1.92 ± 0.54 mm, and the compensation accuracy is 74.3 ± 5.0%. Compared to the landmarks far from the resection region, those near the resection region demonstrated a higher compensation accuracy (P-value = .003) although these landmarks had larger initial displacements.

Conclusions

The proposed hybrid registration method is able to bring preoperatively acquired BOLD and DTI into the operating room and compensate for the deformation to augment low-field intra-operative MRI with rich anatomical and functional information.     

碳纤维经氧等离子/KH550处理后的表面形态和结构

碳纤维(CF)表面经氧等离子、KH550和 LiAlH_4处理后,其物理和化学性能得以改善.由于提高了 CF 和树脂间的联结,使 CF 复合材料的层间剪切强度提高50%以上,在湿热下的强度保留率达94%以上.使用纤维接触角测定仪,SEM 和 XPS 等对 CF 表面的浸润性、形态和化学组成进行了研究.实验指出:CF 经等离子和 KH550处理后,其临界表面能有了提高;CF 本身仅受氧离子刻蚀,故其拉伸强度的损失小于其他处理方法.     

大型空分制氧站DCS调试技术

以宝钢集团浦钢60000 Nm3/h的大型空分制氧站DCS调试为基础,结合以往大型空分制氧站DCS调试经验,探讨了大型空分制氧站DCS调试的特点、施工组织、调试工艺及方法,并对控制回路试验、离心式压缩机防喘振控制组态、压缩机起停及控制逻辑、紧急停车及重要安全回路调试、组态临时变更管理等重点、难点及关键环节的调试技术进行了详细的总结、说明,旨在为其他同类工程提供参考与借鉴.     

双阳煤在PKM气化炉试烧总结

介绍了在PKM气化炉中弱粘结性双阳煤的试烧情况,并给出了主要工艺参数控制范围。试烧结果表明:依兰煤中配入50%双阳煤,汽氧比6.0:1时,气化炉工况良好。     

循环式活性污泥法处理炼油污水

研究为在炼油污水的CAST工艺的主反应区中 ,通过恰当控制pH值和DO(污水中溶解氧含量 )值 ,可以使硝化与反硝化反应同步进行 ,在去除COD ,BOD的同时 ,也可提高其脱氮效果 ,从而得出DO的最佳值为 0 .8mg/L ,pH为 7.3～ 7.7之间。     

On the nature of the active state of silver during catalytic oxidation of methanol

Under the applied high reaction temperatures (900 K) the Ag surface is restructured and a tightly held oxygen species is formed on the surface (O) apart from O atoms dissolved in the bulk (O). Methanol oxidation to formaldehyde proceeds through this O species as demonstrated by application of a variety of spectroscopic techniques.     

介体型水质BOD生物电化学传感器研究进展

生物化学需氧量(BOD)是目前国际上用来衡量水质有机物污染的重要指标之一。由于水体中氧的溶解度非常低,以电子媒介体代替溶解氧为电子受体的介体型BOD生物电化学传感器以其快速、准确、稳定等优点得到了较快的发展。论述了介体型水质BOD生物电化学传感器的发展现状及研究动态,重点讨论了介体型水质BOD生物电化学传感器的工作原理、构成及类型,分析了不同类型传感器的优缺点,并对其核心部分-微生物膜的制备方法做了比较详细的介绍。     

磁氧分析仪在焦化回收系统的应用

分析磁氧分析仪在实际生产中存在的问题,并提出改造措施,以提高电捕焦油器的安全性和稳定性。     

High-temperature oxidation of SiC in a glow-discharge oxygen plasma

The oxidation kinetics and structure of the oxide scales formed on high-density SiC were studied in molecular oxygen at 740 Torr and in a glow-discharge oxygen plasma at 0.1 Torr at temperatures of 1000, 1100, and 1200°C. The monatomic oxygen formed by the glow discharge markedly increased the reaction rate and the vaporization of some of the oxidation products. The marked differences in kinetics suggest that the rate-controlling step during oxidation in molecular oxygen is the dissociation of adsorbed diatomic oxygen to the monatomic species. Films formed in molecular oxygen were mostly amorphous SiO₂ with small inclusions of SiC and graphite, whereas films formed in dissociated oxygen were primarily amorphous SiO₂ containing SiO, S₂O₃, and the coesite form of SiO₂.     

软起动器和变频器的时分多机复用技术及其应用

本文提出了时分多机复用的概念，并对其技术和应用加以具体说明，展现了该技术良好的应用前景。