Environmental effects on the stress corrosion cracking susceptibility of 3.5NiCrMoV steels in high temperature water

Constant elongation rate tests (CERTs) were carried out to investigate the effects of environmental factors of dissolved oxygen and temperature on the stress corrosion cracking (SCC) susceptibility of 3.5NiCrMoV turbine steels. Tests were conducted in pure water of various dissolved oxygen concentrations at temperatures of 50 °C-200 °C in the range of strain rates from 5 × 10⁻⁸/s to 1 ×  10⁻⁶/s. Dissolved oxygen significantly affected the SCC susceptibility of turbine steels in water. The SCC susceptibility of the turbine steels increases as the dissolved oxygen concentration in water increases. The elongation of the turbine steels tested in aerated water at 150 °C at a strain rate of 1 × 10⁻⁷/s decreased to half of that of the steels tested in deaerated water in the same test condition. And the SCC susceptibility of the steels increased with decreasing strain rate, and with increasing temperature. The increase of the SCC susceptibility of the turbine steels in the higher dissolved oxygen environment is considered to be due to the higher content of dissolved oxygen enhancing the reduction reactions of oxygen on the metal surfaces (cathode) and accelerating the dissolution rate at the crack tips (anode) by galvanic attack of an aeration cell.     

Water vapor and oxygen permeability of wax films

The water vapor (WVP) and oxygen (O₂P) permeabilities of beeswax (BW), candelilla wax (CnW), carnauba wax (CrW) and microcrystalline wax (MW), formed as freestanding films, were determined. CnW and CrW both had small values for O₂P (0.29 and 0.26 g·m⁻¹·sec⁻¹·Pa⁻¹ × 10⁻¹⁴, respectively), which are less than half the value for high-density polyethylene and about a decade greater than the value for polyethylene terephthalate. O₂P values for BW and MW were about 6−9× greater than those of CnW and CrW. WVP of CnW was 0.18 g·m⁻¹·sec⁻¹·Pa⁻¹ × 10⁻¹², which is about one-half the value for CrW and MW and about one-third the value for BW. The WVP of CnW was somewhat less than that of polypropylene and somewhat greater than that of high-density polyethylene. Differences in permeabilities among the wax films are attributed mainly to differences in chemical composition and crystal type as determined by X-ray diffraction.     

氧泵型催化膜反应器中甲烷氧化偶联反应(Ⅰ)——氧泵型催化膜的制备及其反应性能

本文采用1％Sr/La_2O_3-Ag-YSZ氧泵型催化膜反应器进行了甲烷氧化偶联反应研究。比较了不同制备方法的催化膜的反应性能,结果发现浸涂法(Ag-YSZ管随旋转轴转动涂制)制备的膜性能最佳。研究了操作条件对甲烷氧化偶联反应的影响。研究证明,传递氧与气相氧同时进料是一种较好的反应方式。结果表明,利用该反应器不仅可以简化分离过程,而且还可得到更高的C_2烃选择性。     

超薄MOF纳米片前驱体高效电催化OER反应

金属-有机骨架材料作为前驱体制备特定形貌的纳米材料用于水氧化反应(OER)，成为新的研究热点。使用溶剂热法在泡沫镍基底上合成超薄的NiCoFe-MOF纳米片，在保留其纳米片形貌的基础上原位电化学转化为金属氢（羟基）氧化物。在1 M KOH电解液中，10 mA?cm-2电流密度时的过电位仅为189 mV，Tafel斜率为35 mV/dec，且长时间电解实验表明其具有较高稳定性。原位拉曼结果表明，反应的高活性来源于反应过程中的“活性氧物种”中间体。     

极限电流型氧传感器的实验研究

本实验用8mol%Y_2O_3-ZrO_2固体电解质制成了极限电流型氧传感器,并测定了氧在0.23～28.70mol%,温度在550～800℃范围时,传感器的输出特性,观察到该传感器有较好的稳定性和电压电流特性曲线。实验验证了极限电流值与氧摩尔分数和温度的关系。     

OCO污水处理工艺在城市污水处理中的应用

介绍OCO工艺及其对城市污水处理的效果。普通城市污水经过该工艺处理之后 ,可以达到我国污水排放标准 ,还可以将所处理的污水经过三级处理之后 ,作为工业用水进行再利用。OCO工艺具有除氮除磷功能强、自动化程度高、运转方式灵活、占地少、出水水质稳定等特点 ,适用于高浓度工矿企业废水和城市生活污水的处理     

聚酰胺66的复配阻燃研究

采用35％磷-溴-锑复配阻燃体系对聚酰胺66进行阻燃，极限氧指数可提高到33．6％，达到UL94-V0级(1．6mm)，且无熔融滴落。阻燃体系的添加会导致聚酰胺66力学性能的下降，但与无机阻燃体系相比较，磷-溴-锑复配阻燃体系对聚酰胺66的力学性能影响较小。采用扫描电镜观察阻燃剂在聚酰胺66中的分散效果，发现分散均匀的体系，在水中或者在110℃的析出实验条件下，阻燃剂的析出量很小，可以维持较长时间的阻燃效果。     

几种血卟啉3,8—烷氧（硫）基衍生物产生单重态氧能力的研究

在“血卟啉衍生物”(HPD)肿瘤光动力疗法取得令人瞩目成就的同时,化学家们证明了临床使用的HPD制剂并非原意义上的血卟啉衍生物,而是一种复杂的卟啉混合物,其中血卟啉(HP),羟乙基-乙烯基-次卟啉(HVD),原卟啉(PP)约占总量的80％,Dougherty等分离得到其余20％未知结构羧基卟啉,认为此为HPD的有效成分,经进一步分析测定其主要成分是二血卟啉醚(DHE)。但最近的工作又表明,全合成得到的DHE与HPD有效成分的化学组成及生物活性亦不相同。显然这类药物组分复杂、结构的不确定限制了肿瘤光动力疗法的进一步发展。近年来,人们正试图从已知结构的化合物中探索新的光敏药物,作者在合成出一系列结构确定的单一组分血卟啉     

Electrodeposition of catalytically active nickel for the oxygen evolution reaction — effects of anionic composition

Nickel electrodes were prepared by electrodeposition in electrolytes of various anionic compositions. The deposition conditions and bath types were evaluated with special emphasis on the electrocatalytic properties for the oxygen evolution reaction (OER). Electrochemical characterizations in a 5 mol/L KOH solution at 25°C showed that the electrode deposited from the chloride bath, having a low Tafel slope of 50 mV/dec and an overpotential of 396 mV at 100 mA/cm², is the most catalytically active among electrodes prepared in electrolytes of various anionic compositions. The electrode activity for the OER is related to the real surface areas, which depend on the anion compositions in the deposition bath and the deposition conditions.     

从煤炭、天然气制取石油石化产品工艺技术

在阐述煤炭、天然气通过吹氧气化制取CO +H2 合成气联产石油石化产品的基础上 ,详细介绍了甲醇、二甲醚、乙烯生产工艺技术的应用与开发 ,对各种工艺路线进行了论证和技术经济评估