双包络TI-环面蜗杆传动的二次包络分析

在一次包络分析的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。齿面接触分析表明：齿面呈双线接触,润滑条件好,承载能力大,在重型机械传动装置中具有实用价值。     

新型超高相对分子量阳离子聚丙烯酰胺的合成

研究了由过硫酸铵、甲醛次硫酸氢钠、功能性单体 DA及其它助剂组成的低温复合引发体系引发丙烯酰氧乙基三甲基氯化铵 (AETMAC)与丙烯酰胺 (AM)水溶液绝热聚合。考察了影响共聚物特性黏数[η]的因素 :单体浓度 1 8%～ 3 2 % ,引发剂浓度 (9～ 3 0 ) mg/L ,功能单体浓度 (2 .9～ 2 3 .2 )× 1 0 - 3mol/L。由该低温复合引发体系在适宜条件下引发 AETMAC/AM共聚合 ,可得到溶解性能很好、阳离子度为 1 0 %～70 % ,分子量 (1～ 2 )× 1 0 7的 P(AETMAC-AM)干粉。     

镍系聚丁二烯橡胶生产技术进展

介绍了近几年国内外镍系顺丁橡胶生产技术的进展情况，内容涉及分子量调节技术、催化剂配置技术、节能降耗的气相聚合、本体聚合工艺及橡胶后处理过程中使用的热泵技术、螺杆挤压工艺，同时也对国内外顺丁橡胶新型防老剂的使用情况及其新品种的开发进行了简要介绍。     

高性能纤维的弯曲疲劳断裂研究

在自制弯曲疲劳装置上 ,对 3种高强对位芳纶及超高相对分子质量聚乙烯纤维 (Dyneema SK65 )进行双面弯曲疲劳试验。结果表明 ,Twaron 2 0 0 0弯曲疲劳寿命的自然对数与预加应力、弯曲角度呈线性关系 ,Dyneema SK65弯曲疲劳寿命明显长于对位芳纶 ,Twaron 2 0 0 0 ,Kevlar 12 9相近 ,都比Kevlar 2 9略长 ;高强型对位芳纶的弯曲疲劳断裂断口芯层呈现出“毛笔头”或“拔丝形”原纤化分裂形态 ,超高相对分子质量聚乙烯纤维弯曲疲劳断裂断口有明显的脆性折断形态 ,无原纤出现。     

聚酯的摩尔质量与机械性能研究——Ⅰ.动态力学性能

应用粘弹谱仪考察了不同摩尔质量的聚酯(PET、PBT、PBT/PET)的动态力学性能,结果表明摩尔质量增大将提高其模量,但亦导致结晶速度变慢,使测得的模量反而比摩尔质量较低的试样小.     

Partial Oxidation of Methane to Syngas over Calcined Ni–Mg/Al Layered Double Hydroxides

The catalytic partial oxidation of CH₄ to syngas was carried out over an Ni–Mg/Al mixed-oxide catalyst prepared from layered double hydroxide-type precursors. The catalysts were characterized by XRD, TPR, UV-DRS, XRF, BET and CHNS analysis. The effects of the catalyst composition and the calcination temperature on the catalytic performance and the extent of catalyst deactivation were investigated. Ni–Mg/Al oxide catalysts converted CH₄ into syngas efficiently with high selectivity. The catalyst performance was strongly related to the Ni particle size and the calcination temperature. The catalysts that were calcined at higher temperature exhibited a better catalytic performance. In conclusion, the NiAl₂O₄ spinel phase had a positive effect on the stability of the catalyst.     

低截留分子质量新型聚芳醚腈酮超滤膜的研制

以新型聚芳醚腈酮为膜材料 ,以N -甲基 - 2 -吡咯烷酮 (NMP)为溶剂 ,研究了聚合物浓度、添加剂种类及含量、凝胶浴温度等对超滤膜性能的影响。结果表明 ,聚合物质量分数以 1 2 %～ 1 3 %为合适的制膜浓度 ,以聚乙二醇PEG - 4 0 0为添加剂时获得了高截留率和高水通量的超滤膜。随着凝胶浴温度的升高 ,水通量明显增大 ,而截留率有所下降 ,而共聚物的浓度增加则有相反的效果。制得的超滤膜具有较低的截留分子量 (PEG- 2 0 0 0 ) ,将制得的超滤膜用于达旦黄、黄X-G等染料的分离 ,截留率均达 90 %以上     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.     

DEDS-10双子表面活性剂的性能研究

合成了一种新型的DEDS-10双子表面活性剂,用红外光谱对所合成化合物的结构进行了初步表征。DEDS-10的临界胶束浓度cm c为0.47 mmol/L,γcm c为34.5 mN/m,A lC l3、CaC l2和NaC l可以使γcm c降低3.6~1.1 mN/m,其cm c值大约为纯水溶液cm c值的1/5~1/3;加入乙醇,可增加其表面活性,在乙醇的浓度为0.22 mol/L时,其表面张力为30 mN/m左右。与阳离子表面活性剂DTAB和非离子表面活性剂曲拉通X-100复配,可以大幅度地降低cm c和γcm c值,与阴离子表面活性剂TLS复配时,cm c降低,cγm c略有增加。     

采矿法方案优选指标权数的动态分析

在采矿方案优选的研究中，其决策的正确与否，取决于参与计算的采矿法的定量、定性指标个数以及这些指标的权数。本文通过实例分析了指标权数的波动对采矿方案优劣排序的影响，以减小决策的风险。