磨制铝粉工艺中物料的动态平衡研究

铝与其他非金属矿物不同，其粉碎工艺既具有球磨工艺的普遍性又具有特殊性。运用传统的球磨理论，对铝在球磨工艺中的物料平衡状态进行了解释。     

Quantification of trace amounts of impurities in high purity cobalt by high resolution inductively coupled plasma mass spectrometry

An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of 24 elements (Be, Mg, Al, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pt, Au, and Pb) in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCl. The matrix effects because of the presence of excess HCl and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the deter- mination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits were 0.016-1.50 μg?g?1, the recovery ratios were 92.2%-111.2%, and the RSD was less than 3.6%. The method was accurate, quick, and convenient. It was applied to the determination of trace impurities in high purity cobalt with satisfactory results.     

激光熔覆TiC增强FeAl金属间化合物基复合材料涂层磨损性研究

利用激光熔覆技术在1Cr18Ni9Ti奥氏体不锈钢表面制得了以TiC为增强相、以FeAl 金属间化合物为基体的耐磨复合材料涂层，研究了激光熔覆。FiC／FeAl复合材料涂层在干滑动磨损条件下的耐磨性能及磨损机制。结果表明：随着载荷和滑动速率的增加，TiC／FeAl金属间化合物基复合材料涂层的磨损速率增加，其磨损机制随着载荷的增加逐渐由磨料磨损向粘着磨损转变；激光熔覆层中TiC体积分数的增加，一方面提高了涂层的磨料磨损抗力，另一方面降低了熔覆层表面与对磨材料之间的粘着倾向，提高了TiC／FeAl涂层的滑动磨损性能。激光熔覆TiC/FeAl金属间化合物基复合材料涂层具有优异的耐磨性能并随TiC体积分数的增加而提高。     

Biosynthesis and identification of volatiles released by the myxobacterium Stigmatella aurantiaca

The volatiles released by agar plate cultures of two strains of the myxobacterium Stigmatella aurantiaca (strains Sg a15 and DW4/3-1) were collected in a closed-loop stripping apparatus (CLSA) and analyzed by GC-MS. Large numbers of substances from different compound classes (ketones, esters, lactones, terpenes, and sulfur and nitrogen compounds) were identified; several of them are reported from natural sources for the first time. The volatiles 2-methyltridecan-4-one (17), its isomer 3-methyltridecan-4-one (20), and the higher homologue 2-methyltetradecan-4-one (18) were identified in the extracts of both strains and were synthesized. In addition, strain Sg a15 produced 2,12-dimethyltridecan-4-one (19), 2-methyltridec-2-en-4-one (23), and a series of phenyl ketones, among them 1-phenyldecan-1-one (14) and 9-methyl-1-phenyldecan-1-one (16), whereas strain DW4/3-1 emitted traces of 10-methylundecan-2-one (21). The biosynthesis of 14 and 16 was examined in feeding experiments with deuterated precursors carried out on agar plate cultures. The leucine-derived starter unit isovalerate was shown to be incorporated into 16, as was phenylalanine-derived benzoic acid into both 14 and 16. The results point to formation both of the phenyl ketones and of the structurally related aliphatic ketones through an unusual head-to-head coupling between a starter unit such as benzoyl-CoA and a fatty acyl-CoA, followed by decarboxylation.     

Influence of volatile matter and deposited carbon on coke yield from coals

The relations between coke yields and the volatile matter content of 30 individual and 30 blended coals were investigated. Coke yields and deposited carbon related to volatile matter content can be expressed in the following equations: CY (%) = 97.89?0.86 VMch+VMc; and DC (%)= ?2.24+0.16 VMch; where: CY=real coke yield; VMch = volatile matter content of charging coal; VMc=volatile matter content of coke, and in the case of <2%; DC = deposited carbon. The test results show excellent correlation with practice.     

Quantitative X-ray powder diffraction analysis of clay minerals in Australian coals using Rietveld methods

The mineralogy of clay-rich mineral matter isolated from a range of Australian bituminous coals has been evaluated in quantitative terms from X-ray powder diffraction (XRD) patterns using a Rietveld-based data processing technique. The chemical composition of coal ash derived from this mineral matter has been calculated and compared to the directly determined composition of the ash prepared from the same coal samples. Although there are some minor differences due in part to uncertainty regarding the actual composition of several minerals, the compositions indicated by the two methods show a relatively high correlation, suggesting that the Rietveld technique provides mineralogical analyses that are consistent with independently determined chemical data. Comparison of the normalised clay mineral percentages from the Rietveld analysis to quantitative interpretations based on a peak intensities in glycolated and heat-treated oriented aggregates of the respective clay fractions also shows a high correlation, confirming mutual consistency of the two different mineralogical analysis methods. Such quantitative mineralogical data are significant to a range of coal exploration, mining and utilization activities, including seam correlation, material handling and ash and slag formation in combustion processes.     

快速法测定AES中未硫酸化物的含量

讨论了一种快速测量AES中未硫酸化物的方法。首先将配制好的AES-乙醇溶液，通过离子交换树脂，然后收集、蒸馏、干燥得到的液体，称重后即可得到未硫酸化物的含量，采用该方法比国家标准节约2．5～3h的分析时间。     

High Density Culture of Porphyridium cruentum in a 42 L Internal Airlift Loop Photobioreactor

1 INTRODUCTION Porphyridium cruentum is a kind of unicellular microalgae, which can live widely in freshwater, marine, brackish, and soil environment[1]. Great attention has been paid to its potential economic value such as the high content of essential high unsaturated fatty acids, especially arachidonic acid (AA) and eicosapentaenoic acid (EPA) (ca 50% in the total fatty acids), ploysaccharides, and synthetic pigments, especially phycoerythrin (PE)[2,3]. During cultivation, the cells…     

Analysis of solvent extracts of bituminous coal macerals by chromatography, 1H n.m.r. and field-desorption mass spectrometry

Analysis of the carbon disulphide extracts of nine samples of UK coal-maceral concentrates by ¹H highresolution n.m.r. spectroscopy, gas-liquid chromatography and field-desorption mass spectrometry indicates the presence of components with a wide molecular weight range extending up to 1200 amu; these are attributed to n-alkanes up to ≈C₅₀ and highly condensed polynuclear aromatic compounds.     

热法磷酸的发展趋势与研究方向

简述了工业制磷酸的生产方法和热法磷酸生产工艺的发展,分析了热法磷酸今后的发展方向,提出了热法磷酸燃烧塔结膜物的研究课题。