Application of electrode materials and catalysts in electrocatalytic treatment of dye wastewater

The dye industry produces a large amount of hazardous wastewater every day worldwide, which brings potential threaten to the global environment. As an excellent method for removal of water chroma and chemical oxygen demand, electrocatalytic methods are currently widely used in the treatment of dye wastewater. The selection and preparation of electrode materials and electrocatalysts play an important role on the electrocatalytic treatment. The aim of this paper is to introduce the most excellent high-efficiency electrode materials and electrocatalysts in the field of dye wastewater treatment. Many electrode materials such as metal electrode materials, boron-doped diamond anode materials and three-dimensional electrode are introduced in detail. Besides, the mechanism of electrocatalytic oxidation is summarized. The composite treatment of active electrode and electrocatalyst are extensively examined. Finally, the progress of photo-assisted electrocatalytic methods of dye wastewater and the catalysts are described.     

多元羧酸与指甲醌染料交联染棉的结构及性能

为了提高天然染料对棉纤维的染色固色性能,以聚马来酸（PMA）和柠檬酸（CA）为交联剂应用于天然染料指甲醌对棉织物的交联染色。采用FTIR、SEM和XRD分析了染色前后棉织物的表面形态及结构,探讨了酯交联对棉织物性能的影响以及多元羧酸复配交联染色机理。结果表明,染色前后棉织物表面差别不大,各纤维间不粘连;直接染色后的棉纤维表面变化不明显,仅有少量染料附着,而交联染色后的棉纤维表面负载较多的染料导致其粗糙度增加,酯化反应主要发生在纤维的非晶态区。与直接染色棉织物相比,交联染色棉织物的染色深度（K/S）和上染率分别提高了88%和38%;染品的绿光、黄光增加,颜色饱和度提高;摩擦色牢度提高了1~2级;耐洗色牢度提高了1~2级;交联染色后棉织物的折皱回复角（WRA）提高了约60%,UPF值达到了50+,具有优异的抗紫外性能。     

Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.     

Co-colouration Effects in the Systems of Metal(Ⅱ)-Rare Earth(Ⅲ)-Xanthene Dye and Their Influences on Photometric Determination of Metal Ions

After comparing the influences of each rare earth(Ⅲ),11 species of metal(Ⅱ)and 8 species of acidictriphenylmethane dye on the formation of coloured coordination compound in the system of Metal(Ⅱ)-RE(Ⅲ)-Dye,it was proven that the co-colouration effect can be caused only by the xanthene dyes(XD)con-taining substituting hydroxy.group on the ortho-position of etheric oxygen group.Besides,the radius of met-al(Ⅱ)must not be smaller than a definite limit;otherwise,no co-colouration appears.Furthermore,the acid-ity of medium is another important factor to affect co-colouration,Bromopyrogallol red causesco-colouration of Pb(Ⅱ)-RE(Ⅲ)only,owing to its higher chromophoric acidity;while alizarin violet causesco-colouration of M(Ⅱ)-RE(Ⅲ)(M=Pb,Ca,Sr and Ba),due to its lower chromophoric acidity.The condi-tions causing co-colouration,the regularities of co-colouration and the influences of co-colouration inphotometric determination of metals were discussed.     

The Structure Stability of Carbide-Free Bainite Wheel Steel

Metallographic structures of carbide-free bainite steel wheel rim are mainly composed of supersaturated lath ferrite and retained austenite film among bainitic ferrite laths. It is suspected that supersaturated ferrite and retained austenite are likely to decompose under the influence of temperature change and mechanical stress. Stability of wheel rim structure is studied by means of x-ray diffraction, dye microscopy, and micro-hardness test. When the samples are tempered in the range of 150-350 °C, the retained austenite films are at the state of relative stability. Fifty percent of retained austenite is decomposed when the sample is tempered at 400 °C. Microhardness increases when the sample is tempered at 150 °C. The decrease in hardness is mild when the samples are tempered from 200 to 500 °C. The mechanical stability of retained austenite film is studied with tensile sample under the effect of tensile stress. The retained austenite appears to be stable in low and middle degree of deformation, and decomposition occurs at great amount of deformation. Diffraction peak of carbide is not found in all above experiments. The steel enriched silicon prevents the carbide precipitation during the transformation. It indicates the carbide-free bainite wheel steels have an excellent thermal and mechanical stability.     

不同分散染料微胶囊的制备及应用

采用原位聚合法进行双层造壁，对不同结构的分散染料进行胶囊化。将分散染料高速均化后，在pH=4～6时加入TMM，65℃保温1．5小时，再滴加一定量PEHMM，在75℃时保温2.5小时进行双层造壁、C.I.分散橙30染料胶囊的粒径平均值为13．53μm，中值8．732μm；C.I．分散蓝56微胶囊粒径平均值为36.3μm，中值24.87μm。胶囊染色结果显示：这两只染料性能优于传统染料，染色后其废液的吸光度分别为0.021和0.003，比传统染色废水的1.286和0.786低很多。     

用原子力显微镜观察菁染料聚集体

对应用原子力显微镜观察菁染料聚集体的文献进行了评述 ,在此基础上采用原子力显微镜观察了 2个感绿增感染料的聚集体     

NIT-Ph-p-BEN氮氧自由基的制备及催化降解性

以对醛基苯甲酸为原料，通过醛酸与2,3-二甲基-2,3-二羟胺基丁烷缩合，再经NaIO4氧化最终制得4-(4,4,5,5-四甲基-1,3-二氧化物)咪唑基-1-苯甲酸（NIT-Ph-p-BEN氮氧自由基）。采用FTIR、UV、ERP（电子顺磁共振波谱仪）和元素分析等对其结构进行表征；通过催化降解废水中有机染料甲基橙、甲基蓝和罗丹明B对其催化活性进行了评估。结果表明，当甲基橙、甲基蓝和罗丹明B浓度为15 mg/L，NIT-Ph-p-BEN质量浓度为0.15 g/L，H2O2浓度为30 mmol/L时，NIT-Ph-p-BEN对甲基橙有更好的催化降解性，仅在1 h内甲基橙的降解率达到94.26%。此外，反应机理表明，H2O2有助于实现NIT-Ph-p-BEN自由基的再生和循环利用。     

纤维织物上靛蓝浓度的测定

介绍了一种快速精确测定染色纱线和织物上靛蓝浓度的分光光度法。靛蓝染色纱线被浓硫酸溶解后,对得到的溶液进行分光光度分析。该方法的精确度可用常规的吡啶萃取法进行验证,是一种既快速又安全的方法。