造林整地排水产生水土流失及其防止措施

造林整地排水产生水土流失及其防止措施［英］Ｐ．Ａ．ＣａｒｔｉｎｇＭ．Ｓ．ＧｌａｉｓｔｅｒＴ．Ｐ．Ｆｌｉｎｔｈｅｍ１引言英国高地造林整地的常规方法是采用顺坡和横坡开沟相结合的办法进行翻耕排水。现已制订有森林排水网路的设计准则及河道管理准则，遵循这些准则...     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

Effect of plasticity on the residual stress measurement using the groove method

The mechanical methods based on milling rectilinear or annular grooves on a component's surface and measurement of relaxed strains are some of the most used semi-destructive methods for the determination of residual stresses. These are evaluated from the relaxed strains by means of equations based upon the linear elastic theory. In this paper the errors due to yielding localised at the bottom of the groove have been investigated. The analyses were carried out by means of the finite element technique varying the most important parameters involved. The experimental results show a good agreement with the numerical ones.     

A prediction method for thermal conductivity of alternative refrigerants in the liquid phase

A prediction method for the thermal conductivity of halocarbon refrigerants in the saturated liquid state in the reduced temperature range 0.3 to well above 0.9 is presented in this paper. The aim of the method is to present a very simple calculation of the transport property useful for engineering purposes. The method determines thermal conductivity as a sole function of the reduced temperature and requires the knowledge of a parameter dependent upon easily available physical constants characteristic of each compound. The method is validated against experimental data available in the literature, giving average absolute deviations which are usually less than 5%, with maximum absolute deviations generally less than 10%. An extension of the method to estimate thermal conductivity of binary mixtures is also presented, along with a comparison with the few experimental data available in the literature.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Dynamic elastic-plastic behaviour of whipping pipes: experiments and theoretical model

This paper is concerned with the problem of pipe whip, the dynamic response of a high pressure piping system subjected to an end force as the result of a pipe break which releases a jet of fluid from the broken section. Both experimental and theoretical results are presented concerning the dynamic elastic-plastic behaviour of cantilever pipes subjected to a transverse force pulse at the free end. Comparisons between experimental data and theoretical predictions are made for mild-steel pipes with outer diameter-to-thickness ratios of 19.5, 28 and 32. It is demonstrated that, for these geometries, the whipping pipes display three characteristically different responses, viz. elastic, plastic hardening behaviour for thick pipes, elastic, plastic hardening-softening behaviour for moderately thick pipes and elastic, plastic hardening-softening-collapse behaviour for thinner pipes. The experimental data taken from a series of high-speed films are compared with the predictions of the instantaneous shapes of the whipping pipes derived from both a rigid, perfectly-plastic, large deflection, dynamic beam model and a more comprehensive model which incorporates the effects of elasticity and plastic hardening and softening, the details of which are presented in the paper.     

间断Galerkin方法的最优误差限

本文考虑了数性双曲方程的离散Ｇａｌｅｒｋｉｎ方法。如果精确到光滑的并且同是几乎均匀的，证明了对于分层常数元的最优的和超收敛的误差限。     

Intelligent Control of Consolidation and Solidification Processes

Intelligent processing of materials (IPM) deals with the integration of process models and in situ sensors into an intelligent process controller to achieve desired material properties. IPM-based control systems recently have been developed for both consolidation and solidification processes. This article explores the application of models based on the finite- element method (FEM) to develop process actuation systems, to design process schedules and component shape, and to develop a control model with which to control the process. The results in this article were presented at the AeroMat ’93 Advanced Aerospace Materials/Processes Conference and Exposition, Anaheim, CA, 7–10 June 1993     

柔性机械手系统的动力学方程

本文应用动力学普遍方程,导出了单链柔性机械手系统的动力学方程;并以递推形式分析该方程的求解过程,递推的每一步只须解低维的方程组,因而便于计算.还讨论了多链柔性树状系统动力学方程的求解方案,它与单链柔性机械手系统具有相似性,便于编制程序.     

天然调味料──酵母抽提物的研究进展

着重论述了酵母抽提物的特性、在食品中的应用前景、制造方法、工业化生产中存在的问题及其解决方法，并对酵母抽提物的发展方向作一展望。     

压力传感器的应力计算

从弹性力学的板壳理论出发,对不同参数的凸型板结构形变膜受压后的应力分布作了近似计算,为高线性度SOI压力传感器的芯片设计提供了理论指导。用BESOI技术研制的凸型板结构集成压力传感器的非线性度达0 09%,样品灵敏度的实测值与应力计算理论值的差别约17%。