Mortar finite element discretization for the flow in a nonhomogeneous porous medium

Darcy’s equations model the flow of a viscous incompressible fluid in a rigid porous medium. One of the parameters of the system depends on the permeability of the medium and, when this medium is not homogeneous, the variations of the parameter could be very high. To handle this phenomenon, we propose a discretization of the model that relies on the mortar finite element method. Indeed, the idea is to construct a decomposition of the domain such that the permeability is constant on each element of the partition and to use independent meshes on the different subdomains. We perform the a priori and a posteriori analysis of this discretization and present some numerical experiments which are in good coherency with the results of the analysis.     

测量不确定度及其评定步骤、方法浅析

阐述测量不确定度定义与来源，及其在实践中的应用形式，按照测量不确定的评定步骤，对如何正确评定测量不确定度以及评定方法提出自己的观点，同时指出评定中的难点及其处理方法。     

江口拱坝坝基渗流场有限元法分析

运用固定网格结点虚流量法及排水子结构技术，对江口拱坝坝基的防渗与排水渗控制施、两岸山体边界条件、隔水岩层阻渗及岩体成层产状等因素在影响坝基渗流场特性中的具体作用进行了计算分析。结果表明，排水子结构技术在精细求解复杂坝基渗流场中具有明显的优势，它在理论和算法上严密，完全能仿真模拟各个排水孔的几何尺寸及排水降压的真实水力行为，不仅能明显地提高计算效率，还能使渗流场的精度大大提高。     

高稳定度CPM飞秒激光特性的研究

利用最优化动力学参数的方法,获得了高稳定度的CPM飞秒激光器运转特性。激光器输出平均脉宽43fs,中心波长624nm,平均功率20mW,脉宽不稳定度±3.3％,频率不稳定度小于10~(-6)。     

�����޵�Ԫ�������Ż����������²�������

下部钻具组合力学性能分析中,稳定器与井壁的间隙是影响其性能的重要因素。对于多稳定器组合,事先设定稳定器与井壁接触情况既困难也不准确。本文从有限单元的基本总势能表达式出发,采用最优化理论中的罚函数法,分析了稳定器间隙对下部钻具力学性能的影响,为解决稳定器与井壁的接触问题找到了一个新方向。     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

万安水利枢纽底孔坝段中隔墙流激振动响应分析

 研究了万安水利枢纽底孔坝段中隔墙在水流脉动壁压作用下的结构随机振动问题，进行了一种泄流工况下的隔墙结构流激振动响应统计量的理论计算，模拟计算了隔墙－水流－基础耦合系统固有频率对流激振动响应的影响，并对水流脉动壁压随机荷载作用下的结构动力可靠度进行了理论分析。     

间苯二酚－甲醛有机气凝胶的结构控制研究

以间苯二酚（Ｒｅｓｏｒｃｉｎｏｌ）－甲醛（Ｆｏｒｍａｌｄｅｈｙｄｅ）为原料，用溶胶－凝胶法和超临界干燥工艺制备了纳米多孔ＲＦ有机气凝胶。系统研究了原料配比、催化剂的使用、反应温度及溶剂用量等因素对ＲＦ气凝胶凝结时间和结构的影响，可以实现对该材料的结构进行纳米尺寸上的控制，从而为该材料的应用开发奠定了基础。     

NEW APPROACH FOR ESTIMATION OF ΔJ AND FOR MEASUREMENT OF CRACK GROWTH AT ELEVATED TEMPERATURE

Abstract— The ACPD-method was used to measure crack growth in low cycle fatigue tests at elevated temperature. The material which was investigated at T = 550°C was the ferritic steel 2.25Cr–1Mo. Characteristic values of representative hysteresis loops were determined. The crack growth data were correlated with the effective part of the fracture mechanics parameter Δ J. A new method for the calculation of Δ J is proposed.     

R－X图解法计算多级串联理想混合反应器

论述Ｒ－Ｘ图解法计算多级串联理想混合反应器的基本原理，并结合实例，对Ｒ－Ｘ法的计算步骤予以详细介绍，为多级串联反应器的设计与计算，提供一种新颖适用的图解计算方法。