电致伸缩陶瓷微位移器非线性的数值方法补偿

本文通过对电致伸缩陶瓷材料的非线性进行分析。找到了补偿电致伸缩陶瓷非线性的数值方法，并对不同回程大小的电滞回线进行了分段处理，使补偿结果更为精确。     

The minimum squared euclidean distance of multi-h phase codes

The minimum squared Euclidean distance(MSED) of binary multi-h phase codes is presented. The signal segregation degree(SSD) has been put forward to determine MSED of multi-h phase codes. In order to maximize MSED, SSD should be as large as possible. The necessary and sufficient conditions of maximizing SSD are derived. Finally, SSD and the exact formulae for MSED of binary 2-h phase codes are also presented.     

Dynamic properties of carbon black filled chlorinated polyethylene/hindered phenol blends

Aggregates of carbon black (CB) in a polymer matrix have a tendency to form a CB network. The dynamic mechanical properties of binary systems of chlorinated polyethylene (CPE) and CB or 3,9‐bis{1,1‐dimethyl‐2[β‐(3‐tert‐butyl‐4‐hydroxy‐5‐methylphenyl)propionyloxy]ethyl}‐2,4,8,10‐tetraoxaspiro[5,5]‐undecane (AO‐80) and their ternary systems were investigated. It was found that the dynamic mechanical properties of those systems depend on the colloidal properties, surface oxides, and surface modification of CB. For binary systems of CPE and CB, oxidized CB gives a high modulus at low strain amplitude and a large Payne effect compared with untreated CB. In contrast, the reverse effect was observed for their ternary systems. Consequently, a good micro‐dispersion is obtainable by surface modification due to physical adsorption of AO‐80 on oxidized CB particles via hydrogen bonds. © 2003 Society of Chemical Industry     

郁江梯级水电站群联合优化调度初探

郁江梯级水电站群由西津、仙依滩和桂航3座水电厂组成。针对西津电厂出力变化频繁,加上西津下游两电厂装机容量较小,经常出现弃水,用增量动态规划法进行了联合优化调度探索,同时介绍马斯京根分段流量演算法。     

精馏塔静态仿真：Ⅰ.静动态混合数学模型的应用

本文为了克服精馏塔静态仿真不易收敛和初值难以给定等难题，巧妙地利用隐含数值积分方法的特点，将稳态与动态数学模型耦合起来，用以求解高难度的非理想精馏塔静态仿真问题。所得静动态混俣模型大大提高了精馏塔静态仿真的鲁棒性，对于高度非理想精馏塔的仿真尤为有效。通过对某丙烯腈萃取精馏塔的静态仿真，充分证明了这种混合模型化方法的可行性。     

预测控制算法的统一格式及其在电加热炉的应用

本文根据常用的两类预测控制算法推出一种新型预测控制算法。并将其应用于一双输入/双输出的力学持久机电加热炉的温度控制系统上,获得了满意的结果:控温精度为±1.5℃/300℃,且适用于非最小相位系统。     

多级复合布尔函数性能研究

本文研究了加法复合布尔函数和乘法复合布尔函数,在平衡性、k次项系数、K次扩散准则(PC)、相关免疫 性(CI)、Walsh谱、代数次数、小项分布等方面得到了一批新结果。     

Dynamic Survivability in WDM Mesh Networks Under Dynamic Traffic

Network survivability is a crucial requirement in WDM mesh networks. In this paper, we systematically consider the problem of dynamic survivability with dynamic single link failure in WDM networks under dynamic traffic demands. Specifically, we investigate various protection schemes, such as dedicated path protection (DPP), shared path protection (SPP), dedicated link protection (DLP), shared link protection (SLP), and two restoration schemes, path restoration (PR) and link restoration (LR). Moreover, two new shared protection methods are proposed, i.e., SRLG-based shared link protection (SRLG-SLP) and SRLG-based shared path protection (SRLG-SPP). The SRLG (shared risk link group) constraint defines the availability of protection resources to a working path, which requires that any two working paths sharing the same risk of failure (or in the same SRLG) cannot share the same protection resources. Furthermore, in our study, we consider a more practical dynamic single-link failure model, in which the link-failure-interarrival time and link-failure-holding time are considered as two independent parameters. Based on this link-failure model, extensive simulations are done to analyze and compare the dynamic survivable performance of various protection and restoration schemes. Resource utilization, protection efficiency, restoration efficiency, and service disruption ratio are employed as survivable performance metrics versus traffic load, link-failure frequency, and link-failure reparation time to evaluate the survivable performance. Many meaningful results are given. In addition, we show that the developed SRLG-SLP and SRLG-SPP protection schemes perform very well in terms of protection efficiency and service disruption ratio, while sacrificing some performance in terms of resource utilization.     

Electrocatalytic hydrogenation of cyclohexanone: Simple dynamic cell design

The electrocatalytic hydrogenation of cyclohexanone has been investigated with catalytic powder particles made of metal nanoaggregates deposited on a nonconductive material such as activated carbon and alumina. The catalytic powder particles were suspended in the solution under vigorous stirring conditions. The brief contact of the powder particles with a porous carbon cathode was sufficient to form adsorbed hydrogen on the metallic nanoaggregates through water electrolysis and initiate the electrohydrogenation process. It is demonstrated that the key parameters of the electrohydrogenation process are both the nature of the metallic nanoaggregates and the nature of the non-conductive material. The hydrodynamics of the solution under vigorous stirring conditions have also been studied for the particular cell used in the present study.