基于D-FNN的混沌铁磁谐振系统非线性补偿控制方法

针对电网混沌铁磁谐振系统产生的混沌现象,提出基于动态模糊神经网络的混沌铁磁谐振系统非线性补偿控制方法。该方法采用动态模糊神经网络来逼近系统的非线性部分,消除了过电压的混沌现象,将系统稳定到目标位置,实现了对系统的非线性补偿控制。Matlab仿真结果表明,基于动态模糊神经网络的非线性补偿控制方法控制结果正确,响应快速。     

大采高采煤机挡矸装置的改进设计

分析了传统的大采高采煤机挡矸装置的结构原理、技术特点及存在的问题,提出了改进设计并进行了仿真分析。通过增加油缸数量、加强加厚顶护板、将刚性连接改为柔性连接、增设分流集流阀等手段,实现了对挡板的动态调节和支护,有效地提高了挡矸装置的可靠性和采煤机的开采效率。仿真结果表明,改进后的挡矸装置受力更均匀,挡板能承受的力更大。     

Gain‐scheduled dynamic output feedback control for discrete‐time LPV systems

This paper presents synthesis conditions for the design of gain‐scheduled dynamic output feedback controllers for discrete‐time linear parameter‐varying systems. The state‐space matrix representation of the plant and of the controller can have a homogeneous polynomial dependency of arbitrary degree on the scheduling parameter. As an immediate extension, conditions for the synthesis of a multiobjective ??_∞ and ??₂ gain‐scheduled dynamic feedback controller are also provided. The scheduling parameters vary inside a polytope and are assumed to be a priori unknown, but measured in real‐time. If bounds on the rate of parameter variation are known, they can be taken into account, providing less conservative results. The geometric properties of the uncertainty domain are exploited to derive finite sets of linear matrix inequalities based on the existence of a homogeneous polynomially parameter‐dependent Lyapunov function. An application of the control design to a realistic engineering problem illustrates the benefits of the proposed approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Adaptive fuzzy dynamic surface control for a class of perturbed nonlinear time-varying delay systems with unknown dead-zone

In this paper,adaptive dynamic surface control(DSC) is developed for a class of nonlinear systems with unknown discrete and distributed time-varying delays and unknown dead-zone.Fuzzy logic systems are used to approximate the unknown nonlinear functions.Then,by combining the backstepping technique and the appropriate Lyapunov-Krasovskii functionals with the dynamic surface control approach,the adaptive fuzzy tracking controller is designed.Our development is able to eliminate the problem of "explosion of complexity" inherent in the existing backstepping-based methods.The main advantages of our approach include:1) for the n-th-order nonlinear systems,only one parameter needs to be adjusted online in the controller design procedure,which reduces the computation burden greatly.Moreover,the input of the dead-zone with only one adjusted parameter is much simpler than the ones in the existing results;2) the proposed control scheme does not need to know the time delays and their upper bounds.It is proven that the proposed design method is able to guarantee that all the signals in the closed-loop system are bounded and the tracking error is smaller than a prescribed error bound,Finally,simulation results demonstrate the effectiveness of the proposed approach.     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.     

Differential equations for a dynamic thermal conductivity experiment

The mathematical model that describes a dynamic thermal conductivity experiment is reconsidered by taking into account the role of thermal expansion. Two differential equations are presented that take into account the various physical phenomena occurring in a long thin rod directly heated by a current pulse. One of the two equations keeps variables space and time completely separate and is particularly useful for computer simulations.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

基于MCS-51系列单片机时间控制器软件的设计与实现

本文设计的基于MCS-51系列单片机时间控制器主要应用AT89C51作为控制核心,采用实时时钟芯片DSl302、EipROM24C02及动态数码显示相结合。具有硬件电路简单、软件功能完善、控制系统可靠、性价比较高等特点,具有一定的使用和参考价值。     

动态移位显示屏的设计

以8×8点阵为基础,设计了一个动态移位显示屏。全屏由20块8×8点阵LED显示模块组成,显示采用动态显示,使文字或图形能实现静止、移入移出等多种显示方式。文中详细介绍了LED点阵显示的显示原理、硬件设计和软件设计。     

Thermal diffusivity of fluids in a broad region around the critical point

Dynamic light scattering is a suitable method for the investigation of transport properties such as the thermal diffusivity of optically transparent fluids. The main advantages of the method are its quickness, the fact of the thermodynamic state of equilibrium of the sample (gradients are not required), and the relatively simple evaluation of data without the necessity of calibration. However, an insufficient production of intensity of scattered light may be a limiting effect. For that reason the vicinity of the gas-liquid critical point represents the classical range of application. In this paper, it is shown that by means of an appropriate choice of experimental apparatus, measurements are also feasible in an extended range of states. Broad regions around critical points of three pure fluids (sulfur hexafluoride, SF₆; ethane, C₂H₆; nitrous oxide, N₂O) over temperature ranges ¦T-T _c¦ of 0.02 to 50 K and density ranges (/_c) of 0.2 to 2 were investigated. In this region the thermal diffusivity shows great variations with temperature and density and cannot be described by means of ideal-gas behavior or relations for liquids. The measurements were carried out along the coexistence curve for both phases, along the critical isochore and along some isotherms with TT _c. The measured or calculated density, pressure, and thermal diffusivity data as well as some correlations are presented.     

加载速率对结构钢力学性能和断裂韧度的影响

在常温下进行了常用建筑结构钢(16Mn和Q235B钢)动态拉伸和动态断裂韧度试验。试验结果表明，材料在动载下无论是屈服强度还是抗拉强度均有一定的提高，塑性有了一定的降低；由于缺口尖端区域温度的升高，常温下动载对于16Mn钢母材和焊缝的断裂韧度是有利的；Q235B钢常温下，焊缝的断裂韧度值较低，且动载对母材的断裂韧度影响较大，和静载相比动载下断裂韧度值降低了4倍有余，可以看出，Q235B钢的抗震性能较差。通过研究发现，对于低韧度水平的材料，研究动载下结构的断裂行为时．材料的强度也应该作为一个考虑因素。