全生命周期软件过程风险管理模型研究

首先从软件过程的角度重新定义了过程风险的基本概念;然后结合CMMI和软件的生命周期分别从软件过程、生命周期和风险管理构建了三维结构的软件项目风险管理模型,提出了基于CMMI的全生命周期的过程风险策划、识别、评估和监控全过程模型;最后建立了软件研制风险管理系统,该系统在实际应用中取得了较好的效果。     

两种模具型芯结构的比较

对比两种高冲压开关件型芯拼块结构的优劣和设计要点。     

抗地震结构的服役费用函数及其建立方法

讨论了服役工程结构的经济性问题 ,包括 :抗地震结构在服役过程中为完成预定功能所需要的经济花费、这些花费同结构抗震可靠度的函数关系以及它们的建立方法。形成的服役费用函数可以作为决策结构最佳抗震设防标准的依据。     

可控式循环通断程序的算法

本文重点介绍了采用梯形图编写的一个程序算法,使用该算法,可以解决高炉上料时,由于炉料中粉末多而引起的高炉悬料情况的发生.     

Modelling water flow,nitrogen transport and root uptake including physical non-equilibrium and optimization of the root water potential

A model is presented for the simulation of water flow, heat flow, and nitrate and ammonium transport. Two approaches are used for modelling plant water uptake as well as for plant nitrogen uptake. Nitrogen transformations are accounted for in a very simple way. This paper focuses mainly on water flow modelling, solute transport, and water uptake. Richards' equation is used to model water flow in layered soil profiles with a great variety of boundary conditions. Solute transport is simulated with either a simple convection dispersion equation or with a two-region physical non-equilibrium model to distinguish between mobile and immobile water and solute exchange between these two regions. A macroscopic sink term is added to Richards' equation to account for plant water uptake. This term can be calculated along two different approaches, one of which is based on the concept of root water potential. The root water potential is then continuously optimized to minimize the difference between the climatic demand and the uptake rate.Simulation results are compared with field data from the Netherlands to illustrate the degree to which the model is able to predict water flow, solute transport and plant water uptake. The root water potential optimization model seems to provide the best prediction of water distribution. In particular the shape of the profile, revealing uptake patterns, is quite well reproduced with this model. Comparison of simulated and observed water content profiles seems also to reveal the presence of preferential pathways. The comparisons show also how predicted solute distributions can be improved by using a two-region approach rather than a simple convection-dispersion model.     

防止设备结垢延长乙烯装置运行周期

设备结垢堵塞问题已成为乙烯装置长周期运转的难点。笔者重点论述了急冷油塔和冷箱的结垢问题及防范措施。     

混凝土受硫酸盐侵蚀的环境因素研究现状

硫酸盐侵蚀是水泥混凝土结构病害劣化的主要原因之一.海水、盐湖、地下水等环境中大多含有硫酸盐,混凝土组分本身也有可能带有硫酸盐,而它们在各种条件下对混凝土产生腐蚀作用,使其发生破坏.文章分析了阳离子、阴离子、硫酸盐浓度、温度、PH值、干湿循环及冻融循环、荷载作用等因素对混凝土受硫酸盐侵蚀的影响,综述了目前的研究现状,指出了当前研究成果中的成就与不足.     

5000t/d水泥窑Kalina循环余热发电系统应用

根据氨-水混合物的物性,讨论了不同热源温度下Kalina循环适用的工质参数匹配,以5 000 t/d新型干法水泥生产线为研究对象,将Kalina循环系统用于水泥窑余热发电.通过系统的流程仿真模拟,得出了Kalina循环在给定废热条件下的做功能力及系统热力学性能.计算结果表明,Kalina循环系统比Rank ine循环系统发电功率提高20.4%,热效率绝对值提高2.66%,效率达到44.31%.     

基于改进的BASS模型的服装产品生命周期研究

为提高服装的销售预测准确度,通过产品的生命周期曲线模型,使得服装销售预测的定性分析与定量预测有机地结合在一起。针对目前服装产品生命周期曲线模型的局限性,引入改进的BASS模型,对服装产品生命周期进行研究。通过销售实例探讨改进的BASS模型用于描述服装生命周期的可行性,建立了以改进的BASS模型为基础的服装产品生命周期模型,并利用该模型对服装销售量做预测,取得了比其他模型更高的精度。     

水泥基材料超低温冻融循环试验研究

利用液氮作为环境介质进行超低温冻融循环试验,研究了超低温对水泥基材料抗冻性能的影响。观测冻融循环前后试件外观、质量和强度等宏观性能变化,采用扫描电子显微镜（SEM）分析水泥基材料冻融循环前后微观结构变化。试验结果表明：在超低温条件下,混凝土的抗冻性能明显强于砂浆,且随混凝土强度提高其抗冻性能呈增长趋势;SEM分析结果表明超低温冻融循环后泡水融化试件结构内存在明显缺陷;超低温冻融循环试验可以加速水泥基材料破坏进程,明显减少试验周期,能相对较快的评价出水泥基材料的抗冻性能。