双－（p－N，N－二甲氨基苄叉）酮／二苯基碘鎓盐复合体系的电子转移光显色

不同的双－（ｐ－Ｎ，Ｎ－二甲氨基苄叉）酮ＤＭＢＫ和二苯基碘盐（ＤＰＩＯＦ）复合，组成一种新型的电子转移光显色体系，ＤＭＢＫ／ＤＰＩＯＦ复合体系在暗处有良好的热稳定性。在光作用下很快发生从激发态ＤＭＢＫ至ＤＰＩＯＦ的电子转移，并伴随ＤＭＢＫ染料的褪色，测得ＤＭＢＫ光褪色速度的次序为：ＤＭＢＡ＞ＤＭＢＰ＞ＤＭＢＨ。与此同时，电子转移又引起新的光显色反应，对ＤＭＢＡ化合物，在７００ｎｍ处出现新吸收峰。其光密度随光照时间而增长，然而，ＤＭＢＰ和ＤＭＢＨ体系这种光显色现象并未观察到，这可能由于它们的中间产物不能共平面的缘故，ＤＭＢＡ的光显色速度和最大密度明显取决于浓度和溶剂性质。本文对这种短波区光褪色和长波区光显色的光化学反应过程作了讨论。     

环氧丙烯酸酯涂料的紫外固化研究

采用E-44环氧树脂与丙烯酸反应，用翁盐作催化剂，制备了适于配制竹木基涂饰的紫外光固化的环氧丙烯酸酯预聚物，讨论了催化剂的种类对合成反应的影响。对固化产物进行了红外表征。光引发剂种类和交联剂含量对固化速率的影响、光引发剂含量对凝胶含量的影响、灯距对固化时间的影响、固化时间对涂膜性能的影响也进行了讨论。     

Controlled release of insecticide carbaryl from sodium alginate,sodium alginate/gelatin,and sodium alginate/sodium carboxymethyl cellulose blend beads crosslinked with glutaraldehyde

Interpenetrating network polymeric beads of sodium alginate (NaAlg) and its blend with gelatin (gels) or sodium carboxymethyl cellulose (NaCMC) have been prepared by crosslinking with a common crosslinking agent, glutaraldehyde (GA), for the release of insecticide carbaryl (Carb). The prepared beads were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Scanning electron microscopy confirmed the spherical nature and surface morphology of the particles. Bead characteristics, such as carbaryl entrapment efficiency, particle size, equilibrium swelling degree, and carbaryl release kinetics, were determined. The effects of the preparation conditions, such as Carb/NaAlg ratio, time of exposure to GA, blend ratio, and temperature of release medium on the carbaryl release, were investigated for 25 days at 25°C. It was observed that the carbaryl release decreased with increase in crosslinking of network, while it increased with increase in Carb/NaAlg ratio and temperature. The release of carbaryl also increased with increase in Gel or NaCMC content in the blend beads. The highest carbaryl release was found to be 100%, for the beads that were prepared with 1 : 1 NaAlg/Gel at 16 days. The diffusion coefficients have been calculated for the transport of insecticide through the polymeric beads, using initial time approximation method. These values were also consistent with the carbaryl release data. The carbaryl release from most of the bead formulations followed the Fickian trend. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1310–1319, 2006     

Experimental investigations and thermodynamic modelling of KCl–LiCl–UCl3 system

Experimental investigations and Gibbs energy modelling of KCl–LiCl–UCl₃ system employing CALPHAD method are reported. Gibbs energy modelling of the subsystems KCl–UCl₃ and LiCl–UCl₃ was carried out primarily using phase diagram data from the literature. For the Gibbs energy modelling of the KCl–LiCl subsystem, new phase boundary data corresponding to four terminal compositions $(x_{\mathrm{LiCl}}=0.03$, 0.05, 0.95 and 0.97) obtained through differential thermal analysis data along with thermochemical and phase diagram data from the literature were used. Thermal analysis was also carried out for KCl–LiCl eutectic mixture containing small amounts of UCl₃ $(x_{{\mathrm{UCl}}_3}=9.03\times {10}^{-3}$ and $1.79\times {10}^{-2}$). The liquidus temperatures for these compositions were found to be 637 K and 674 K. Electromotive force data for dilute solutions of UCl₃ in the KCl–LiCl eutectic melt, measured in the temperature range 708–833 K in the present work, were found to be in good agreement with the literature data. These data were also used as input for the Gibbs energy modelling of the KCl–LiCl–UCl₃ system. In order to improve the quality of the resulting Gibbs energy functions of the quasibinaries and the quasiternary, enthalpies of mixing of the corresponding melts estimated using an empirical correlation based on surrounded-ion model were also used as input. Finally, the generated Gibbs energy functions were used to compute phase equilibria.     

电导法测定水的全盐量

采用电导法研究了水溶液中盐的浓度与其电导率的关系，根据模拟水样和实际水样在电导率与全盐量的关系上有较好的吻合性，介绍了电导法测定水中全盐量的方法，结果表明在低浓度范围内电导率与盐浓度成线性关系，与传统的重量法相比，具有快速、简便、准确度高的特点。     

EDTA滴定法精确测定可溶性氯化物中氯含量

介绍了利用EDTA滴定法精确测定可溶性氯化物中氯含量的原理、条件和方法。试样溶解后,先在强酸性介质中用AgNO3沉淀Cl-离子,沉淀过滤后,加入过量Ni(CN)42-发生置换反应,然后在pH9.5的氨性缓冲溶液中,以紫脲酸铵为指示剂,用EDTA标准溶液滴定置换出的Ni2 离子。结果表明,改进后的本法,准确、干扰小、终点现象明显,是一种准确的测氯方法。测定结果的变异系数仅为0.18%,回收率为98.3%～100.9%。     

超重力反应结晶法纳米碳酸钙浆料及粉料的表面处理

研究了脂肪酸盐A、水溶性铁酸酯偶联剂B（B1)以及铁酸酯偶联剂C对新型超重力反应结晶法所得的纳米CaCO3浆料及粉料的湿法表面处理的配方与工艺，确定了A体系的最佳改性时间为30～40min、改性温度为40～50℃、改性剂用量(质量分数)为3%～5％；B(B1)体系搅拌强度必须很高，改性时间30～40min，改性温度80℃左右，改性剂用量(质量分数)3％～5％；C体系的最佳改性时间为30～40min，改性剂用量(质量分数)为3％～5％。同时，采用红外光谱对改性前后的纳米碳酸钙进行了表征，表明改性刑已连接至CaCO3表面。最后，用分散稳定模型简要分析了改性机理。     

三轴应力下盐岩声发射特征研究（研究生论坛稿件）

利用MTS815 Flex Test GT岩石力学试验系统和PCI–2声发射(AE)三维定位实时监测系统,开展不同围压下盐岩的三轴压缩声发射定位试验,探讨盐岩轴向加载过程中声发射特征的围压效应。研究结果表明：盐岩AE定位点多少与振铃计数率大小、能率高低具有良好的一致性。声发射高计数、高能率、定位点集聚段等随围压增加而滞后。低围压下,盐岩发生剪切破坏,高计数、高能率、AE定位点集聚段主要出现在屈服阶段和峰值应力前阶段;高围压下,盐岩呈塑性大变形特征,高计数、高能率、AE定位点集聚段主要在峰值阶段及峰后阶段出现。围压增加,累计计数和定位点的总量呈减少趋势;最大能率和累计能量随围压增加而减小,5MPa约分别为30MPa的43倍和22倍。     

相转移催化氧化合成苯甲酸

研究了季铵盐CTAB催化高锰酸钾氧化氯化苄合成苯甲酸的反应。考察了CTAB用量、高锰酸钾用量、反应温度、反应时间对反应的影响。结果表明,合成苯甲酸的最优条件为:高锰酸钾与氯化苄的摩尔比为2∶1,CTAB的摩尔分数为氯化苄的8%,反应温度90℃,反应时间为3h,苯甲酸的产率可达89%。     

我国锌盐工业的现状与展望

阐述了我国锌盐工业的发展现状、存在的问题和面临的机遇与挑战,提出了发展锌盐工业的建议。