Experimental study of composite cold-formed steel C-section floor joists

Twelve large-scale slab specimens and twenty-two companion push-out specimens were tested to study the behavior and capacity of composite slab joists consisting of cold-formed steel C-sections and concrete. Four shear transfer mechanisms, including surface bond, pre-fabricated bent-up tabs, pre-drilled holes, and self-drilling screws, were employed on the surface of the flange embedded in the concrete to provide shear transfer capacity. Results indicated that specimens employed with shear transfer enhancements showed a marked increase in strength and reduced deflection compared with those relying only on a natural bond between steel and concrete to resist shear. Of the three shear transfer enhancements investigated, bent-up tabs provided the best performance at both the strength and serviceability limit states, followed by drilled holes in the embedded flanges. The use of self-drilling screws resulted in the lowest strength increase. The correlation of shear transfer capacity of push-out specimens with the ultimate capacity of large-scale specimens indicated that the average experimental flexural capacity of the slab specimens was approximately 1.16 times the average predicted value based on push-out test results.     

Zeolite synthesis from paper sludge ash with addition of diatomite

BACKGROUND: This study aimed to investigate the synthesis of zeolites from paper sludge ash (PSA) with added diatomite to remove both NH₄⁺ and PO₄^3? for water purification. The PSA had low Si and significant Ca contents. Four types of diatomite: white (T‐W) and brown (T‐B) from deposits of marine origin in Takanosu, and white (S‐W) and gray (S‐G) from lacustrine deposits in Shonai, were added to NaOH solution to increase the Si content and thereby synthesize zeolites with high cation exchange capacity (CEC). RESULTS: The order of the amounts of Si extracted from the diatomite to the alkali solution was S‐W > T‐W = T‐B > S‐G, which correlates with the amorphous SiO₂ content of diatomite. The original ash without addition of diatomite yielded hydroxysodalite with CEC of about 1.0 mmol g^?1. For all samples, the addition of diatomite to the solution yielded zeolite‐P with a higher CEC, but the addition of excess Si inhibited the synthesis of zeolite‐P, and the CEC of the product was low. A product with high CEC including zeolite‐P was obtained in a solution with around 500 mmol L^?1 of Si concentration, and had the ability to remove both NH₄⁺ and PO₄^3?. CONCLUSION: Diatomite has the potential for used as an additive for the synthesis of high CEC zeolite from PSA. The product with zeolite‐P exhibited relatively high CEC, capacity for NH₄⁺ uptake, and the ability to remove PO₄^3? by precipitation, which is preferable for water purification applications. Copyright © 2008 Society of Chemical Industry     

Estimation of Load Capacity of Pipe Piles in Sand Based on Cone Penetration Test Results

Pipe piles can be classified as either closed- or open-ended piles. In the present paper, the load capacity of both closed- and open-ended piles is related to cone penetration resistance qc through an experimental program using calibration chamber model pile load tests and field pile load tests. A total of 36 calibration chamber pile load tests and two full-scale field pile load tests were analyzed. All the test piles were instrumented for separate measurement of each component of pile load capacity. Based on the test results, the normalized base resistance qb/qc was obtained as a function of the relative density DR for closed-ended piles, and of both the relative density DR and the incremental filling ratio (IFR) for open-ended piles. A relationship between the IFR and the relative density DR is proposed as a function of the pile diameter and driving depth. The relationship between IFR and DR allows the estimation of IFR and thus of the pile load capacity of open-ended piles at the design stage, before pile driving operations.     

世界乙烯工业及其进展

阐述了世界乙烯产能需求现状，近扑扩能增产预测，乙烯原料分析以及乙烯生产的技术进展。     

Evaluating reactivity to ecological momentary assessment during smoking cessation.

Ecological momentary assessment (EMA) consists of assessing phenomena in real time in the natural environment. EMA allows for more fine-grained analyses of addictive behavior and minimizes threats to internal validity, such as recall biases and errors. However, because of the intensive monitoring involved in EMA, measurement reactivity is a concern. To test whether EMA with palmtop personal computers induces reactivity, the authors compared smoking-related outcomes between smokers using EMA and those not using EMA during a quit attempt. The use of no-EMA control groups has been rare in reactivity investigations to date. The EMA protocol included event-contingent assessments (smoking episodes, urge episodes) and random assessments. Outcomes included biologically confirmed abstinence and self-report measures of withdrawal, self-efficacy, motivation, affect, and temptations. Participants were smokers motivated to quit (N = 96). They were randomized to 1 of 3 groups: EMA for the week preceding a planned quit date, EMA for the week following the quit date, and no EMA. Abstinence rates did not differ between the groups at Day 7 or at Day 28 postcessation. For the 20 subscales assessed at each of 3 assessment times, there were significant differences between participants with and without EMA experience for 3 subscales at the 1st of 3 assessment times, and significant differences for 3 different subscales at the 3rd assessment time. These differences suggest some reactivity to EMA, although the inconsistent pattern across time indicates that further research is needed to definitively conclude that EMA induces reactivity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Computation of Bearing Capacity Factor Nγ?Terzaghi’s Mechanism

A procedure based on K?tter’s equation is developed for the evaluation of bearing capacity factor Nγ with Terzaghi’s mechanism. Application of K?tter’s equation makes the analysis statically determinate, in which the unique failure surface is identified using force equilibrium conditions. The computed Nγ values are found to be higher than Terzaghi’s value in the range 0.25–20%, with a diverging trend for higher values of angle of soil internal friction. A fairly good agreement is observed with other solutions which are based on finite difference coupled with associated flow rule, limit analysis, and limit equilibrium. Finally, the comparison with available experimental results vis-à-vis other solutions shows that, computed Nγ values are capable of making a reasonably good prediction.     

海底管道的沉降量计算

根据极限平衡和极限分析方法,建立了软黏土地基土体上海底管道的极限承载力计算公式。当地基处于极限状态时,基础作用于地基的全部荷载应该等于该地基土体的承载能力,根据这一关系式可以推导出海底管道沉降量的计算公式。通过对试验结果的分析,证实所采用的计算方法是可行的。     

水资源承载力量化和评价方法

通过对水资源承载力内涵界定及系统特性分析,在比较各类水资源承载力研究方法不同特点的基础上,提出了水资源承载力分析框架和步骤,构建了量化计算和指标评价相结合的综合分析方法,并深入分析了水资源承载力边界条件的确定原则。     

钻井井架力学性能分析

钻井井架作为钻机系统设备中的关键部分,其力学性能直接关系到整套钻机系统的安全生产。文章推导了常用于分析钻井井架力学性能的理论,即线性屈曲、几何非线性和双重非线性理论。提出同时用这三种理论对钻井井架进行综合比较分析,从而合理地预见井架力学性能的方法。以A形钻井井架为例,进行了详细的分析,得到了井架的失稳形式、极限承载、破坏特征及薄弱部位,为钻井井架的设计、优化与评定提供了参考。     

生态公路概念浅析

通过对生态公路概念的分析,深入剖析了生态公路的内涵,总结了生态公路的特征,从宏观上科学地把握了生态公路的思想精髓,从而进行总结,为生态公路的进一步发展奠定了理论基础。