Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

Electrochemical investigation of the iron-containing and no iron-containing AB5-type negative electrodes

The electrochemical behaviour of LaNi_3.55Mn_0.4Al_0.3Co_0.75−xFe_x (x = 0, 0.15, 0.55, 0.75) intermetallic compounds has been studied and presented [C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, Int. J. Hydrogen Energy 29 (2004) 307–311; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 360 (2003) 266–271; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 384 (2004) 249–253]. It has been deduced that the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound has interesting electrochemical properties. In this paper we present the electrochemical study of LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound properties compared with the parent LaNi_3.55Mn_0.4Al_0.3Co_0.75 compound. Several techniques, such as, the chronopotentiometry, the constant potential discharge (CPD), the cyclic voltammetry (CV) and the linear polarization (LP) were applied to characterize these electrochemical properties. The electrochemical discharge capacity of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 alloy increases to reach 294 mAh g⁻¹ after few cycles only (five cycles). However, the activation of the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloy takes more than 20 cycles to be achieved and the obtained maximum discharge capacity is 194 mAh g⁻¹. The hydrogen diffusion coefficient D_H was determined by constant potential discharge and cyclic voltammetry techniques. The obtained values of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compounds are 6.29 × 10⁻¹¹ and 7.62 × 10⁻¹¹, and 2 × 10⁻⁸ and 7.5 × 10⁻⁸ cm² s⁻¹ by CPD and CV techniques, respectively. The exchange current density values, determined by a linear polarization technique, are 44 and 27 mA g⁻¹, respectively, for LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloys.     

电沉积镧镍合金薄膜的电化学贮氢性能研究

利用在水溶液中电沉积的方法制备了LaNi5贮氢合金薄膜。采用XRD方法研究了贮氢合金薄膜在充放电前后相结构的变化，运用扫描电镜观察了合金薄膜的表面形态，通过电化学测试（循环伏安、恒电流充放电）研究其电化学贮氢性能。结果表明，该合金薄膜具有较好的电化学贮氢性能，电化学活性较高，无需活化过程，最高电化学容量可达156mAh／g。     

基于机会约束的电动汽车充光储一体化充电站容量优化方法

针对电动汽车充电站建设运营成本高,土地利用率较低,功能单一的缺点,提出了电动汽车充光储一体化充电站的容量优化方法。考虑光伏出力及电动汽车充电负荷的不确定性,研究在不确定性环境下的容量配置问题,以保证优化方案的可靠性。基于机会约束规划,以建设运营成本最小为目标建立电动汽车充光储一体化充电站容量配置模型,通过序列运算理论将模型中含有随机变量的约束进行确定性转化,采用CPLEX作为模型的求解工具。算例验证了所提模型及方法的有效性。     

地方高校转型背景下生物工程专业课程设计教学改革与探索

以地方本科高校转型发展为背景,以提高生物工程专业应用技术人才培养质量为目标,针对地方高校生物工程专业课程设计教学的特点和存在的问题,以生物工程专业的本科教学为例,探讨课程设计教学改革的有效措施,为探索课程设计教学环节的改革措施提供了参考。     

基于动态模式分解的移动用户信道容量预测算法

在多输入多输出环境下,为了能够连续预测出移动用户的信道容量并以此合理地分配用户资源,提出了一种基于动态模式分解（DMD）的信道容量预测方法及其优化方法：基于经验模态分解的选择性归一化动态模式分解（ESN-DMD）.仿真结果表明,DMD算法只适用于预测低移速低复杂度的用户信号,ESN-DMD算法可以预测不同移速的用户信道容量.     

大型软包锂离子电池的热物性实验研究

针对大型软包锂离子电池热物性参数的测定问题,提出适用于该型电池的热参数表征方法. 基于准稳态导热原理,建立电池的传热理论模型. 开展实验研究电池的比定压热容和导热系数与温度的依变关系,分析热损对测试结果的影响,对测试方法的有效性进行验证. 结果表明,电池比定压热容随着温度的升高而线性增大,导热系数受温度的影响较小. 在900 s内可以测得电池热参数在10~60 °C下的变化状况,实验验证结果显示测算精度高于92.3%,具有测算周期短、准确度高和测试灵活等优势.     

焊接箱型截面构件在不同焊缝熔深下承载力性能试验研究

为了有效改善大跨度桥梁中管翼缘焊接箱型截面构件的耐久性的问题,提出采用耐候钢代替普通钢的管翼缘箱型截面梁。同时,为了研究耐候钢管翼缘焊接箱型截面构件填充混凝土后在全熔透和部分熔透条件下的单轴承载力性能,开展了焊接矩形截面在三种不同焊缝熔深下的耐候钢管混凝土截面轴压短柱试验研究。分别测试每个试件在单轴压力作用下的静态应变、动态应变,以及竖向位移和侧向位移。对比构件承载力的试验结果及理论分析结果,得出不同熔深下焊接箱型截面管翼缘组合构件的承载力性能。研究结果表明:1）耐候钢管翼缘焊接箱型截面构件的全熔透焊缝承载力高于部分熔透焊缝承载力。2）全熔透试件开裂时的竖向位移较部分熔透试件的位移值大,而不同熔深下构件的横向位移测点L4随轴压荷载的增大而有增加,L3测点横向位移规律不明显。3）不同耐候钢管翼缘焊接箱型截面构件横向整体受拉,局部在顶部角部位置受压。构件的混凝土内部和钢板表面应变情况复杂,规律不明显。     

卡盘的若干设计计算问题

以“夹持系数”取代传统的摩擦系数；对卡盘的主要零件重新进行了受力分析，推导出能满足各零件设计计算之用的计算公式；并提出了提高卡盘夹持能力的有效措施：（１）减小卡瓦和卡圈斜面之间的摩擦系数；（２）提高卡瓦和主动钻杆之间的夹持系数     

真空预压联合间歇电渗加固疏浚淤泥试验研究

沿海地区的疏浚工程产生了大量疏浚淤泥。为了研究疏浚淤泥的处理方法,通过室内模型试验,对温州地区的疏浚淤泥进行了分级真空预压联合间歇电渗的加固处理,并对间歇通电的时间及间歇逐级加压电渗进行了研究。试验过程中监测了真空压力、电流、排水量和土表的沉降;试验之后,对土体含水率、十字板剪切强度以及电极腐蚀质量进行了测量。试验结果表明,虽然间歇通电时间越长,土体固结效果越好,但是间歇通电时长超过24 h时,土体加固效果开始减弱;然而,电极腐蚀质量和间歇电渗的平均能耗系数却依然与间歇通电时长呈正相关。此外,分级真空预压联合间歇逐级加压电渗法相比于分级真空预压联合间歇电渗法获得了更佳的土体加固效果,并且其电极腐蚀质量和间歇电渗的平均能耗系数也显著降低。