核壳型含氟丙烯酸酯共聚乳液

以十二烷基硫酸钠（SDS）和壬基酚聚氧乙烯基醚（OP-10）为复合乳化剂，甲基丙烯酸十二氟庚酯（Actyflon-God）、甲基丙烯酸甲酯（MMA）、丙烯酸丁酯（BA）为原料制备了壳层含氟的核壳型丙烯酸酯共聚物乳液。用红外光谱（FT—IR）表征乳胶膜化学组成，用透射电子显微镜（TEM）观察了乳胶粒的微观形态结构，并用X射线光电子能谱（XPS）进行了表面分析。发现氟有向空气与膜面迁徙的现象。通过吸水率表征含氟丙烯酸酯共聚物乳胶膜的表面性能，结果表明含氟量增加使乳胶膜吸水率大大降低。     

微生物絮凝剂产生菌HHE-P7的最佳培养条件研究

HHE-P7为从活性污泥中筛选出的一株高效絮凝剂产生菌。通过实验确定了HHE-P7最优营养成分和培养条件:葡萄糖为碳源,酵母膏作氮源,培养基初始pH=5.0,250mL三角瓶中装液量为140mL,种子接入量为培养液容积的2%,摇床温度30℃、转速150r/min。在此操作条件下培养2d后,所产微生物絮凝剂对高岭土悬液的凝絮率为97%,絮凝剂粗品产量达4.0g/L。     

纳米二氧化钛的杀菌性能测试

采用新工艺制备出具有光催化性的纳米二氧化钛。为了验证其杀菌性，以工业循环冷却水中的异养菌为实验对象进行杀菌实验，结果表明：自制纳米二氧化钛具有良好的杀菌性，杀菌率可达99．2％，而且可以回收，循环使用，产品有广阔的应用前景。     

Contraction stress build‐up of anisotropic conductive films (ACFs) for flip‐chip interconnection: Effect of thermal and mechanical properties of ACFs

The important mechanical mechanism for the electrical conduction of anisotropic conductive films (ACFs) is the joint clamping force after the curing and cooling processes of ACFs. In this study, the mechanism of shrinkage and contraction stress and the relationship between these mechanisms and the thermomechanical properties of ACFs were investigated in detail. Both thickness shrinkages and modulus changes of four kinds of ACFs with different thermomechanical properties were experimentally investigated with thermomechanical and dynamic mechanical analysis. Based on the incremental approach to linear elasticity, contraction stresses of ACFs developed along the thickness direction were estimated. Contraction stresses in ACFs were found to be significantly developed by the cooling process from the glass‐transition temperature to room temperature. Moreover, electrical characteristics of ACF contact during the cooling process indicate that the electrical conduction of ACF joint is robustly maintained by substantial contraction stress below T_g. The increasing rate of contraction stresses below T_g was strongly dependent on both thermal expansion coefficient (CTE) and elastic modulus (E) of ACFs. A linear relationship between the experimental increasing rate and E × CTE reveals that the build‐up behavior of contraction stress is closely correlated with the ACF material properties: thermal expansion coefficient, glassy modulus, and T_g. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2634–2641, 2004     

聚合物材料脆韧转变判据及影响因素分析

综述了聚合物共混增韧机理包括弹性体增韧、刚性粒子增韧、弹性体与刚性粒子协同增韧等研究进展；着重介绍了临界基体层厚度、损伤竞争准数、分子链参数、临界界面黏结条件、临界特征长度等几种源于单一粒子填充的脆韧转变判据，并分析其在复合粒子填充改性聚合物中的适用性。此外，还结合增韧机理和脆韧转变判据讨论了基体性能、分散相状态及相间界面黏结强度等因素对复合体系韧性的影响，提出寻找合适的复合分散相、适当调整复合粒子的结构比例、改善相间界面黏结以及设计最佳断裂路径仍将是今后努力的方向。     

Coal liquefaction by in-situ hydrogen generation.: 2. Zinc-water model compound reactions

Model compound studies were carried out to elucidate the reaction mechanisms taking place during the liquefaction of coal with the hydrogen produced from the reaction of zinc and water. In compounds of the type Ph-(CH₂)_n-Ph the splitting of the aliphatic bridge was easier with higher n values. Ether type compounds such as diphenylether were unreactive although the C-O bond in dibenzylether was easily cleaved. Condensed ring aromatic compounds gave low conversion with hydrogenation being facilitated by an increase in ring number. Phenolic compounds such as phenol did not react well, but the reactivity increased with increase in aromatic ring size. The cleavage of the aliphatic bridge was accelerated by the OH group, for example, in the case of 4-hydroxydiphenylmethane bond scission was about 15 times higher than that of diphenylmethane. Heterocyclic compounds were unreactive.     

Assessing the sustainability of non-renewable brackish groundwater in feeding an RO desalination plant in Bahrain

The Rus-Umm Er Radhuma aquifer in Bahrain is a non-renewable source of brackish water (8-15 g/L), which forms a lens underlain everywhere with brines of over 100 g/L. Aquifer utilization has started in 1984 to feed a reverse osmosis (RO) desalination plant, with an economic life of 25 years (2010). Future plant upgrade strategy is formulated around boosting the plant production, which will require increasing the we llfield abstraction, in addition to a possible future rehabilitation program to extend the plant life by another 15 years (2025). The limiting factor in expanding the RO plant and its rehabilitation is the future feed water salinity, which have to be assessed before any investments are made to expand the RO plant and commission additional abstraction wells and implement the rehabilitation program. The aquifer management is based on mining a one-time brackish water reserve stored in the aquifer, the main management objective is stated as to sustain the aquifer future availability in feeding the desalination plant with a specified salinity limit of 20 g/L over the economic life of the plant of 25 years (1985-2010), and also over the plant extension period by rehabilitation (2010-2025). The stochastic analysis methodology utilizing conditional simulation is applied to conduct a risk assessment of violating these two pre-specified sustainability constraints under the proposed abstraction increase; and provided a tool to aid the decision-making process in the development and management of the aquifer under large uncertainties. Simulation results indicated that the risk of having the salinity of the wellfi eld produced water to increase due to the proposed increase in the wellfield abstraction to reach 20 g/L over the economic life of the plant (2010) is very small and minimal. However, it is questionable that the feed water salinity will be maintained under the proposed rehabilitation program to extend the plant economic life by another 15 years (2011-2025). For this option, it is recommended that model post-auditing be performed, and new updated predictions should be made as more data of potentiometry. salinity. and hydraulic parameters become available.     

用循环经济理念自主创新治理DSD酸氧化废水的新路

本文阐述了在循环经济理论指导下,依靠科技进步自主创新改革氧化工艺,开创了治理DSD酸氧化废水的新路:源头上减少资源的投入,实现″减量化″;末端采用资源化处理技术,回收废水中有用的资源,实现″再利用″、″再循环″。成功的解决了曾经困扰DSD酸行业发展的老大难问题,促进了我国DSD酸工业的发展,从DSD酸生产和出口大国正发展成为强国。     

Effect of test frequency and water content on localized crack-tip heating in nylon-6,6

Fatigue crack propagation (FCP) tests were conducted at various frequencies on nylon-6,6 specimens equilibrated over a range of moisture levels to determine the crack growth rates and the crack-tip temperatures as a function of water content. Frequency-sensitivity was correlated with the amount of crack-tip heating taking place, with crack-tip temperature being found to depend strongly on the estimated loss compliance, D″, of the material. The frequency-sensitivity of FCP in nylon was seen also to be affected by mean stress, suggesting that creep processes are often significant in FCP of nylon.     

中央空调的水处理

本文扼要介绍了中央空调循环冷却水和冷冻水系统中常见的问题及其原因,并对冷却水和冷冻水的处理程序作了初步的阐述.