Information systems effectiveness: research designs for causal inference

Abstract. This paper examines the capacity of the research designs of 37 empirical studies of information systems (IS) effectiveness to provide a basis for the development of theories about behaviour related to IS effectiveness. The power of each study to support causal inference was evaluated in terms of (a) its handling of the time dimension, (b) its ability to weigh differences and (c) its resistance to internal validity threats that pose alternative explanations for its reported findings. Of the reviewed studies, 29.7% could account for the time dimension, 32.4% employed a comparison group and 16.2% were not susceptible to any internal validity threats. Only 13.5% of the studies combined an accounting for the time dimension with the use of a comparison group. Of these, however, only 5.4% were also invulnerable to internal validity threats. The research designs of nearly 95% of these published studies were deficient in supporting causal inference. In those studies, suggestions that one variable was causally related to another variable could not be substantiated. Encouragement for the future capacity of IS effectiveness research to support causal inference was found in a trend towards the use of quasiexperimental designs. Recommendations are made regarding ways to increase the inferential capacity of research designs employed in the study of IS effectiveness.     

大坝施工混凝土质量的评价体系

本文介绍了大坝施工混凝土质量的评价系统软件的设计思路和设计成果。它利用现代计算机技术和应用模糊数学理论评价混凝土重力坝和拱坝单块和整体的质量。在采用模糊综合评价工程质量中，对不同工艺环节，对坝体不同部位，鉴于其质量要求的差异应赋予不同的权重，在权重的取值上采用了专家调查排序，定量转化的方法是比较适宜的。在程序设计中，评价数学模型采用了BASIC程序，访膜块通过*TXT文件实现了与整个大坝混凝土质量微机管理系统的接口及数据传递。操作运行方便灵活。     

Verification of wind resource study of a Scottish region

In a survey of the practical wind energy resource present in the Tayside Region of Scotland it was estimated that over 1500 km² of land is suitable for wind energy development in the Region after consideration of a range of physical, technical and institutional factors. Wind speed data for this survey was obtained from the Energy Technology Support Unit (ETSU) UK Wind Speed Data Package. To verify the wind speeds obtained from the ETSU package a representative sample of sites in and around the identified areas of potential in Tayside were modelled for mean annual wind speed using the Wind Atlas Analysis and Application Program (WA^sP). The wind speeds for the sites obtained from the WA^sP analysis were compared with those obtained from the ETSU UK Wind Speed Data Package and conclusions drawn as to the reliability of the Tayside wind energy survey and the general applicability of the ETSU package for broad wind energy resource assessment.     

Wind energy resource assessment for five locations in Saudi Arabia

The analysis of recently collected wind data at five sites in Saudi Arabia namely, Dhulum, Arar, Yanbu, Gassim and Dhahran is presented. The five sites represent different geographically and climatologically conditions. The data collected over a period spanned between 1995 and 2002 with different collection periods for each site. Daily, monthly and frequency profiles of the wind speed at the sites showed that Dhulum and Arar sites have higher wind energy potential with annual wind speed average of 5.7 and 5.4 m/s and speeds higher than 5 m/s for 60 and 47% of the time, respectively. The two sites are candidates for remote area wind energy applications. The costal site's, i.e. Yanbu and Dhahran wind speed data indicated that the two sites have lower annual wind speed averages and wind blows at speed higher than 5 m/s during afternoon hours. That makes the two sites candidates for grid connected wind systems for electrical load peak shaving. The data of Gassim site showed that the site has the lowest wind energy potential compared to the others. The annual energy produced by a Nordex N43 wind machine is estimated to be 1080, 990, 730, 454 and 833 MWh for Dhulum, Arar, Yanbu, Gassim and Dhahran, respectively. The analysis showed that the estimated annual energy produced by the machine based on 10 min averaged data is 2.5% higher than the estimated energy based on 30 min averaged data.     

Simulation of the VVER-1000 pump start-up experiment of the OECD V1000CT benchmark with CATHARE and TRAC-PF1

In the framework of joint effort between the Nuclear Energy Agency (NEA) of OECD, the United States Department of Energy (US DOE), and the Commissariat a l'Energie Atomique (CEA), France a coupled three-dimensional (3D) thermal-hydraulics/neutron kinetics benchmark for VVER-1000 was defined. The benchmark consists of calculation of a pump start-up experiment labelled V1000CT-1 (Phase 1), as well as a vessel mixing experiment and main steam line break (MSLB) transient labelled V1000CT-2 (Phase 2), respectively. The reference nuclear plant is Kozloduy-6 in Bulgaria. The overall objective is to assess computer codes used in the analysis of VVER-1000 reactivity transients. A specific objective is to assess the vessel mixing models used in system codes. Plant data are available for code validation consisting of one experiment of pump start-up (V1000CT-1) and one experiment of steam generator isolation (V1000CT-2). The validated codes can be used to calculate asymmetric MSLB transients involving similar mixing patterns. This paper summarizes a comparison of CATHARE and TRAC-PF1 system code results for V1000CT-1, Exercise 1, which is a full plant point kinetics simulation of a reactor coolant system (RCS) pump start-up experiment. The reference plant data include integral and sector average parameters. The comparison is made from the point of view of vessel mixing and full system simulation. CATHARE used a six-sector multiple 1D vessel thermal-hydraulic model with cross flows and TRAC used a six-sector, 18-channel coarse-mesh 3D vessel model. Good agreement in terms of integral parameters and inter-loop mixing is observed.     

Application of condition-based HRA method for a manual actuation of the safety features in a nuclear power Plant

A practical approach to develop a more realistic fault-tree model with a consideration of various conditions endured by a human operator is proposed. In safety-critical systems, the generation failure of an actuation signal is caused by the concurrent failures of the automated systems and an operator action. These two sources of safety signals are complicatedly correlated. The failures of sensors or automated systems will cause a lack of necessary information for a human operator and result in error-forcing contexts such as the loss of corresponding alarms and indications. It is well known that the error-forcing contexts largely affect the operator's performance. An automated system which consists of multiple processing channels and complex components is also affected by the availability of the sensors. This paper proposes a condition-based human reliability assessment (CBHRA) method in order to address these complicated conditions in a practical way. We apply the CBHRA method to the manual actuation of the safety features such as a reactor trip and auxiliary feedwater actuation in Korean Standard Nuclear Power Plants. Even the human error probability of each given condition is simply assumed, the application results prove that the CBHRA effectively accommodates the complicated error-forcing contexts into the fault trees.     

Housing Tenure: Pacific Families in New Zealand

Home ownership has been associated with health, social and economic benefits. However, a decline in ownership has been observed over the past decade in New Zealand. Minority groups, including Pacific people, have been disadvantaged in the housing sector. This study investigated housing tenure and the relationship between tenure and health among mothers of a birth cohort of Pacific children in New Zealand. Findings showed that most families lived in state or private rental accommodation with few (15.4 per cent) owning their own homes. Homeowners were more likely to be older, partnered and have higher incomes. Better mental health was observed for homeowners compared to renters. Findings can inform housing and public health policy for Pacific families.     

农业重组微生物生物安全研究进展

综述了近年来农业重组微生物的研究现状和进展 ,详细介绍农业重组微生物环境释放的监控方法以及对环境的冲击作用 ,对一些有关生物安全研究的热点问题进行了探讨     

工程建设项目职业健康安全和环境管理机构的主要职责

工程建设项目要实施健康、安全和环境管理,文章阐述了工程建设项目职业健康安全和环境管理机构设置的必要性,该机构是项目职业健康安全和环境管理体系及其管理网络的管理者,是完成项目职业健康安全和环境保护管理目标的第一责任部门。该机构的主要职责有:编制作业文件,组织培训教育,进行监测、检查和监督,审核不符合项的整改、纠正和预防工作,记录及其管理,项目职业健康安全和环境管理评审。组织精悍、职责明确的管理机构并通过严密有序的工作,是实现项目健康、安全、环境管理目标的重要保证。     

The Role of Acceptance and Job Control in Mental Health, Job Satisfaction, and Work Performance.

Acceptance, the willingness to experience thoughts, feelings, and physiological sensations without having to control them or let them determine one's actions, is a major individual determinant of mental health and behavioral effectiveness in a more recent theory of psychopathology. This 2-wave panel study examined the ability of acceptance also to explain mental health, job satisfaction, and performance in the work domain. The authors hypothesized that acceptance would predict these 3 outcomes 1 year later in a sample of customer service center workers in the United Kingdom (N = 412). Results indicated that acceptance predicted mental health and an objective measure of performance over and above job control, negative affectivity, and locus of control. These beneficial effects of having more job control were enhanced when people had higher levels of acceptance. The authors discuss the theoretical and practical relevance of this individual characteristic to occupational health and performance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)