STRESS INTENSITY FACTORS AND WEIGHT FUNCTIONS FOR SEMI-ELLIPTICAL SURFACE CRACKS IN FINITE-THICKNESS PLATES UNDER TWO-DIMENSIONAL STRESS DISTRIBUTION

Abstract— A Fourier series approach is proposed to calculate stress intensity factors using weight functions for semi-elliptical surface cracks in flat plates subjected to two-dimensional stress distributions. The weight functions were derived from reference stress intensity factors obtained by three-dimensional finite element analyses. The close form weight functions derived are suitable for the calculation of stress intensity factors for semi-elliptical surface cracks in flat plates under two-dimensional stress distributions with the crack aspect ratio in the range of 0.1 ≤ a/c ≤ 1 and relative depth in the range of 0 ≤ a/t ≤ 0.8. Solutions were verified using several two-dimensional non-linear stress distributions; the maximum difference being 6%.     

任丘油田雾迷山油藏抽油机井系统效率初步探讨

总公司1996年对任丘雾迷山油藏抽油机井进行测试,系统效率高达51%~68%,其结果出乎意料。从影响抽油机系统效率的几大因素入手,分析出任丘雾迷山油藏抽油机井系统效率高的主要原因。任丘雾迷山油藏属裂缝性破酸盐岩油藏(即灰岩油战),由于其裂缝发育、渗透性好、油层厚度大、地层温度高、油气比小、饱和压力低等,使得抽油机井生产呈现如下特点:()大泵径,长冲程,低冲次大排量采油;(2)中浅京挂,小沉没度;(3)抽汲流体为液体单相,泵充满程度高;(4)部分井为连抽"带喷"状态,抽油系活塞底部受力大;(5)井液粘度低,油井不结蜡,摩阻损失小。由于这些特点以及近年来使用的新型节能抽油机,使得抽油机井系统效率大大高于其它油田抽油机井系统效率。     

水溶性防氧化剂在SMT用印制板上的应用

水溶性的防氧化剂是一种有机可焊性保护剂。其方法是在印制板完全阻焊、字符层的印刷，并经电检之后，通过表面浸渍在裸铜的贴片位或通孔内形成一种耐热性的有机可焊性膜层。这种有机、可焊、耐热的膜层，膜厚可达0.3-0.5mm，其分解的温度可达约300℃，传统的印制板的热风整平法亦无法满足QFP愈来愈密集的需求，同时也无法满足SMD表面平整度的要求，更无法适应PCB薄型化生产。烷基苯并咪唑的OSP法能弥补这项缺陷，因而在PCB业乃至SMT产业中得到了广泛的应用。     

水平井岩屑录井的影响因素及对策

由于岩屑沉积床的形成、井壁坍塌和井眼不规则、岩屑多次破碎、钻时资料失真及混油钻井液污染等因素影响，水平井的岩屑比普通直井更混杂、更细碎，代表性也更差，岩屑中的油气显示真假难辨。通过加密实测迟到时间，参考钻井参数及DC指数可以对岩屑进行较准确地分层、描述，采用多次荧光滴照、四氯化碳浸泡、气测资料分析等方法，能够有效地区分真假油气显示。     

地地战术导弹飞行可靠性指标评定方法

在小子样情况下 ,利用系统和分系统试验数据对导弹的飞行可靠性指标进行评定 ,从数学上说是系统可靠性综合问题 .运用MML SR方法对新型号地地战术导弹的飞行可靠性指标进行评定 ,避免了MML方法在遇到无失败单元时不适用的缺陷 ,在利用地面试验信息方面有其明显优势 ;运用Bayes方法对改进型导弹的飞行可靠性指标进行评定 ,将不同试验阶段的多源试验信息作为验前信息 ,扩大了信息量 .最后 ,对两种方法在工程应用上遇到的问题进行了讨论 ,并给出了解决方法 .     

SHAPE GENERALIZED ISOTHERMAL EFFECTIVENESS FACTOR FOR FIRST-ORDER KINETICS

A generalized effectiveness factor equation (Eq. (32)), in terms of modified Bessel functions, is derived for a catalyst pellet of arbitrary shape. The derivation is based on utilizing an appropriate one-dimensional approximation for the Laplacian in an arbitrary shaped body subjected to a uniform external concentration field. The comparison of the result with the available expressions for various geometries is highly satisfactory. It unifies the expressions for the three fundamental shapes, viz., infinite slab, infinite cylinder and sphere, and also compares very well with the exact solutions for finite shapes over the entire range of the Thiele modulus.     

环境影响及计算机设备可靠性

和所有设备一样，计算机设备也是在一定环境中工作的，各种环境因素无时不对设备产生影响。要使计算机设备在各种环境中保持良好的性能，必须了解各种环境对计算机设备影响的机理和过程，分析在环境因素中那些因素是影响计算机设备的主要因素及其力度、频率、周期等，以便采取措施保护计算机设备正常工作。简要介绍除温度外，各种环境因素对计算机设备的影响。     

Electrical and growth characteristics of Au/Al0.15Ga0.85N:Si structures with various Si incorporations

We have investigated the growth characteristics of n-Al_0.15Ga_0.85N:Si/GaN and the electronic properties of Au/n-Al_0.15Ga_0.85N:Si diode structures grown by metal-organic chemical vapor deposition (MOCVD) with various Si incorporations. The Al_0.15Ga_0.85N:Si layers were grown on undoped GaN/sapphire (0001) epitaxial layers in a horizontal MOCVD reactor at the reduced pressure of 300 torr. The mirrorlike surface, free of defects, such as cracks or hillocks, can be seen in the undoped Al_0.15Ga_0.85N epilayer, which was grown without any intentional flow of SiH₄. However, many cracks are observed in the n-Al_0.15Ga_0.85N:Si, which was grown with Si incorporation above 1.0 nmol/min. While Au/n-Al_0.15Ga_0.85N:Si diodes having low incorporation of Si showed retively good rectifying behavior, the samples having high Si incorporation exhibited leaky current-voltage (I-V) behavior. Particularly, the Au/n-Al_0.15Ga_0.85N:Si structure grown with Si incorporation above 1.0 nmol/min cannot be used for electrical rectification. Both added tunneling components and thermionic emission influence the current transport at the Au/n-Al_0.15Ga_0.85N:Si barrier when Si incorporation becomes higher.     

罗茨真空泵机组抽气速率分析

罗茨真空泵机组因配用前级泵不同和所处工作压力范围的差异，相应其抽气速率变化较大，设计中应根据具体工况条件及真空系统使用要求，力求使罗茨真空泵机组体现好的适用性和经济性。     

分布式光纤喇曼放大技术及其在WDM系统中的应用

介绍了分布式光纤喇曼放大技术的原理、特点和应用 ,并从受此影响的 WDM传输系统的信噪比、噪声指数和品质因数三个方面讨论了光纤喇曼放大技术在提升光纤通信系统性能方面的重要作用。