Failure load prediction of structural adhesive joints : Part 2: Experimental study

The objective of this study was to determine how the fracture of adhesive joints depends on elastic beam parameters describing the adherends and the applied loads. The basic specimen geometry was the cracked lap shear joint constructed of aluminium alloy with various adherend and bondline thicknesses. Loads were applied in different combinations of bending, tension and shear to generate a failure envelope for each adhesive and specimen geometry. It was found that crack propagation for precracked specimens occured at a critical strain energy release rate but was also a function of the G_I/G_II ratio and the bondline thickness. The experiments also showed that the loads required to propagate a crack in a precracked specimen were always lower than the loads required to break the fillet. Hence, by treating uncracked joints as being cracked, where the fictitious crack tip is assumed to coincide with the location of the fillet, a conservative estimate of the failure load is obtained.     

人体局部代谢率监测系统设计

在实现将温度、湿度及辐射传感器集成于独立检测探头基础上,设计了一种人体局部代谢率监测系统。系统通过采集人体指端生理参数,根据人体能量代谢守恒法,建立数学模型并计算静息代谢率。经过实验验证:该系统可以实现代谢率的方便测量,测试结果能够反映人体正常的代谢情况。由于系统设计简便、成本低,可被广泛用于人体的能量代谢率检测。     

On the catalytic C-H activation of some silicon dioxide overlayers on thin metal film systems — An observation on the isokinetic effect

Kinetic data on the exchange reaction betwee hexane and deuterium have recently been reported by Maier and coworkers [1]. The reaction was catalysed by a series of platinum or rhodium systems, some of which had the property that the upper surface was shielded by a silica overlayer. The data are reinterpreted to indicate an isokinetic temperature of 580 K. This observation indicates that all the catalysts behave in a similar manner, which means that the exchange reaction does not require a free metal surface.     

硫酸工业中常见气体有效能计算

介绍理想气体、理想气体混合物、真实气体、真实气体混合物的有效能计算方法，并以硫酸工业中常见气体为例加以说明。通过编写计算机程序进行计算，可实现有效能的快速分析，便于实际应用。     

Relationship between oxidative stability of vitamin E and production of fatty acids in oils during microwave heating

Effects of microwave heating on the oxidative stability ofd-tocopherols were studied in relation to the production of fatty acids in oils. During microwave heating, the stability of tocopherols decreased in the orderδ>β>γ>α. This order did not depend on the types of ethyl esters of fatty acids or oils present. But, the shorter the chainlength and the lower the degree of unsaturation of the fatty acid ethyl esters, the greater was the reduction in amount of individual tocopherols. A similar tendency was observed when tocopherol-stripped vegetable oils, with equimolar mixtures of tocopherols added, were treated under the same conditions. The reduction in tocopherols became greater with increasing levels of free fatty acids.     

农村智能电表推广应用研究

随着我国经济社会的快速发展,建设坚强智能电网的步伐也越来越快。智能电表作为智能电网的最末端,已开始在农村推广应用。通过分析目前农村智能电表推广应用中存在的问题,提出了在农村智能电表全面推广中应解决的问题和应对措施。     

电能量采集及计费自动化系统的应用分析

当前的人工抄表和计算已很难适应电能统计和结算的要求,致使能够满足电网商业化运营的电量计费系统应运而生。介绍了电能量采集及计费自动化系统的用途、数据流和功能。     

扎赉诺尔褐煤制取高炉喷吹料和中热值煤气研究 (Ⅰ)煤气、焦油产率及性质

本文是在10kg／h固体热载体干馏实验装置上用扎赉诺尔褐煤制取高炉喷吹料和中热值煤气的研究结果。在干馏温度450℃～650℃范围制得煤气110Nm3/t～400Nm3/t，煤气热值为14．7MJ／Nm3～17．5MJ／Nm3，属中热值煤气。可供民用，也可用于补充钢铁企业燃气不足，平衡能源。得低温焦油2％～9％，可加工成化工产品和燃料油。半焦可用于高炉喷吹。     

电动汽车机电复合制动力分配策略研究

为了实现再生制动力与机械制动力在驱动轮和从动轮之间的优化分配,在保证车辆制动安全的同时提高能量回收效率,将汽车理想制动力分配I曲线与模糊算法相结合,提出一种基于模糊控制的电动汽车机电复合制动力分配策略。设计了电动汽车再生制动力分配模糊控制器,根据车辆工况与理想制动力分配I曲线,计算前后轮上分别应加载的机电复合制动力大小。建立了电动汽车制动系统动力学仿真模型,在此基础上进行仿真分析。最后利用Advisor仿真软件对该分配策略进行回收能量效率测试。结果表明,该分配策略既能保证汽车前后轮的制动力分配按照理想制动力I曲线分布,确保汽车的制动安全;又能有效地实现再生制动能量回收,提高电动汽车的续驶里程。     

抗氧剂3114合成反应热力学和动力学的研究

研究了常温溶剂法合成抗氧剂3114反应热力学和动力学过程。控制温度在117±2℃,研究结果表明,反应是零级反应,反应速率常数k=1.91×10-3/min,反应的平衡常数K=138.4(mol/L)-6,反应活化能Ea=1366.2J/mol。