六盘山盆地与酒西盆地成藏条件对比

研究认为，六盘山盆地与酒西盆地具有相似的构造演化特征和油气成藏条件。中生代为走滑拉分盆地，发育张扭伸展断层系，新生代为陆内前陆盆地，发育扭压逆冲断裂系；中生代坳陷都发育生烃潜力较好的白垩系烃源岩，具有相似的烃源岩演化特征、生储盖组合条件和油气运聚特征。因此，分析酒西盆地油气藏分布特征和成藏控制因素，有利于认识和预测六盘山盆地的油气分布规律，以便指导下一步的油气勘探。     

石化企业分配制度改革初探

在明确中国石化集团公司收入分配制度改革的目标模式下,从健全和完善企业激励机制的角度,对炼化企业职工收入分配制度中工资和奖金的分配设计提出改进措施和建议。     

连铸钢坯质量的原位统计分布分析研究

采用原位统计分布分析技术得到与样品原位置相对应的数以万计原始信号并对其进行系统解析，实现不同质量连铸钢坯试样的疏松度、均匀度以及夹杂物含量的定量表征。准确计算了连铸钢坯试样疏松度、碳元素的最大偏析度。提出铸坯各原位置成分含量的权重比率方法用以表征材料的均匀度，并提供了统计分布允许差范围内（C0±R）所占权重比率以及权重比率为95%置信度时，中位值置信扩展率（K）等2种判断模式。该方法以测量信息的原始性、原位性及统计性为特征，反映了连铸钢坯较大尺度范围内各化学组成及其形态的定量统计分布规律。采用上述方法可以     

VSR调节技术在煤气加压机上的应用及分析

叙述了VSR(The Variable Spin Regulator）调节技术在南钢气体供应公司成功应用的实例。实际运行证明，VSR调节技术具有调节灵敏、抗喘、节能、软启动等方面的技术优势。文中还简明地阐述了VSR调节技术的原理并分析比较了液偶及变频调节。     

氧化铝熟料单筒冷却机节能技术改造

本对影响氧化铝熟料单筒冷却机冷却效率的因素进行了分析，并提出了相应的节能技术改造措施，取得了明显的节能效益。     

Aspects of rapid crack propagation in silicon

Fracture experiments with silicon specimens in recent years have shown the need for a new approach to the analysis of rapidly propagating cracks in single crystals. Behaviour and phenomena have been revealed that fracture in these materials is rather different from the fracture of both amorphous and polycrystalline materials. We show that continuum mechanics is insufficient for analyzing crack propagation in single crystals since it is unable to consider atomistic‐scale phenomena. Accordingly, we describe basic phenomena associated with rapid crack propagation in silicon : (i) anisotropic velocity‐dependent R‐curve behaviour, as a key phenomenon dictating atomistic scale behaviour, (ii) crack deflection from one cleavage plane to another as a mesoscopic scale phenomenon in single‐crystal fracture, (iii) the Rayleigh surface wave speed as the limiting crack tip velocity is re‐examined, (vi) the lowest crack velocity in brittle crystals is examined, and finally (v) the interaction between crack path and preferred cleavage planes in single crystals is depicted.     

Characterization of strength properties of thin polycrystalline silicon films for MEMS applications

The aim of this work is to characterize the strength properties of polycrystalline silicon (polysilicon) with the use of tensile and bending test specimens. The strength of thin polysilicon films with different geometry, size and stress concentrations has been measured and correlated with the effective size of the specimen and its stress distribution. The test results are evaluated using a probabilistic strength approach based on the weakest link theory with the use of STAU software. The use of statistic methods of strength prediction of polysilicon test structures with a complex geometry and loading based on test values for standard material tests specimen has been evaluated.     

Hydrothermal Modeling Studies of Cooling Tower Alternatives

The Environmental Effects Committee of the ASCE Energy Engineering Division has been developing a report on “Energy Production and Reservoir Water Quality” for publication. The report covers the regulatory framework that dictates much of the procedures for studies related to this topic, the fundamental reservoir hydrodynamics and water quality modeling used in preparing studies, the kinds of studies that can be prepared at different levels of analysis, and a series of applications that illustrate the problems encountered and applications of the various techniques. This study of hydrothermal modeling as applied to examining cooling tower alternatives for an existing steam electric station on a moderately large reservoir is included in this report and is presented here as an illustration of the types of studies included. This particular study subtended the usual steam electric plant cooling water discharge studies that relate to specific regulatory thermal plume size standards, and had to be designed around developing plant and cooling tower operations that would meet specific fisheries requirements for a zone of passage and refuge for fishes throughout the receiving embayment. After being used in developing cooling tower and plant operating details for the designers to work with, it was required that the hydrothermal modeling results be verified under actual tower operating conditions. In addition, it was required that the impact of the combined operations on dissolved oxygen be examined in detail. This paper covers the background to setting up the study, the kinds of statistical comparisons used to verify the hydrothermal studies, and similar studies for the analysis of dissolved oxygen distributions.     

Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

油藏能量势及应用前景

建立了油藏能量势的定义，阐述了其物理意义。油藏能量势好地揭示油藏开发过程中流体运动的本质，运用该定义能较好地解释油藏开发过程中的水窜、气窜、间歇注水和脉冲注水、注水井调剖和注氮气采油技术机理，对指导油藏勘探、开发具有一定的意义。