有机化合物中碳原子化学环境的分类

进行碳－１３ＮＭＲ波谱模拟的一种常用方法为线性回归，其数学模型则由已知结构所测得的化学位来建立。显然，每一数学模型仅可用于某种相似的化学环境。因此，为了进行化学环境的分类，本文提出权重层次位图法和分子连接性指数法两种方法以进行一些参数的计算，同时采用多元分析手段，如主成分分析和聚类分析，以进行多维空间数据点的显示，所得结果比较满意，从而可为碳－１３波谱模拟中回归方程的选择提供理论依据。     

中国古典园林三维造型研究

论述了采用层次结构化及参数化三维造型方法，建立一个以造型函数库为核心，从而构造各类、各级园林景观构件表面模型的方法和过程。对于某些非建筑类的园林配景构件，采用了Ｆｒａｃｔａｌ方法进行造型。     

给水流量控制系统仿真辅助设计

本文将给水流量系统规范化，给出静、动态数学模型，通过计算机仿真计算建立起设计参数Ｓ与系统特性间关系数据库，这些数据可用于控制系统辅助设计。本文还介绍了在Ｓ较小时自动补偿系统增益和时间常数的自适应控制方法并给出仿真结果。     

教学动画制作系统Movie-Maker

Ｍｏｖｉｅ－Ｍａｋｅｒ是一个集成化的适合于结构化图形的教学动画制作工具，它具有较强的功能和通用友好的用户界面，可望为ＣＡＩ的发展作出较大贡献。本文主要阐述该系统的设计思想和总体结构。     

A modified flow enforcement technique for ATM networks

In ATM networks the requirement of providing the negotiated Quality of Service (QOS) needs an efficient flow enforcement technique that will result in preventive congestion control. A very effective technique is the Exponentially Weighted Moving Average (EWMA) method. In this paper, we have suggested improvements to the EWMA and call it the Enhanced EWMA (EEWMA). Simulation results show that the EEWMA is consistently better than the EWMA in most of the situations. We present comparisons of cell loss under various conditions. No theoretical analysis is presented.     

应用粒子动态分析仪研究水力旋流器流场

利用粒子动态分析仪(PDA),对水力旋流器内固相颗粒流场做了全面的测定,得出水力旋流器内固相颗粒的流态、浓度及粒度分布,为进一步查清水力旋流器的工作机理提供了重要理论依据。     

Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

核电材料在模拟反应堆环境中应力腐蚀破裂测试技术与性能评价

简要介绍了采用慢应变速率试验，Ｕ型弯曲和Ｃ形环试验等技术，分别对８００合金，３０４和３１６及３１６Ｔｉ不锈钢Ａ５３３Ｂ压力容器用多在模拟核反应堆环境中的应力腐蚀破裂敏感性性进行的试验研究的一些主要结果；并结合电化学测试和表面膜俄歇电子能谱分析结果进行了讨论。     

微型无阀泵参数化结构设计及测试

 从理论计算和试验两方面研究了用于微流控化学分析芯片的微型无阀泵流动特性，初步建立了微型无阀泵流道结构的数学模型，重点讨论了结构参数的选取原则及相应的流动阻尼系数的计算方法． 通过试验验证了数值计算的可靠性，为微型无阀泵参数化设计及优化提供了理论依据及经验曲线．     

考虑变质量湍流影响的水平井流入动态分析

在水平井生产过程中,井筒内管流与地层渗流互相制约、互相影响、互为边界条件,从而构成了一个完整的水动力学体系。根据水平井生产时井筒内管流与油藏的相互作用关系,建立了水平井筒存在压力梯度的变质量湍流与地层渗流的耦合计算新方法。关于井筒内流的计算;应用了经典的k_εM湍流模型,关于地层的渗流计算,采用了有限元法。通过耦合模拟获得了井筒内湍流场流速分布及总压能损耗的规律,根据耦合模拟计算结果绘出了较为准确的水平井流入动态曲线。该计算方法为描述水平井流入动态、评价水平井产能、确定合理生产制度提供了可靠的手段.