混合结构楼房爆破拆除倒塌范围的确定

通过对混合结构楼房爆破倾倒过程特点的分析,提出了楼房在倾倒过程中的运动计算模型,并应用体积平衡原理,得到这类楼房爆破爆堆参数计算公式,用该公式计算的结果与实例中爆堆实测数据相比较,相对误差不超过11%.     

羰基铁类随机混合吸波材料等效电磁参数的计算

本文为计及多重散射偶极子间的相互作用，引入参量εｈ和μｈ，导得一组公式。它不仅能计算铁氧体类也能计算羰基铁类的随机混合吸波材料的等效电磁参数，均与实验结果吻合良好。     

Polyaniline-multiwalled carbon nanotube composites: Characterization by WAXS and TGA

Polyaniline/carboxylated multi-walled carbon nanotube (PAni/c-MWNT) nanocomposites have been synthesized by micellar aided emulsion polymerization with various c-MWNTs compositions, viz., 0.5, 1, 5, and 10 wt %. The microcrystalline parameters such as the nanocrystal size (〈N〉), lattice strain (g), interplanar distance (d_hkl), width of the crystallite size distribution, surface weighted crystal size (D_s), and volume of the ordered regions were calculated from the X-ray data by using two mathematical models, namely the Exponential distribution and Reinhold distribution methods. The effects of heat ageing on the microcrystalline parameters of the PAni/c-MWNT nanocomposites were also studied and the results are correlated. The thermal stability and electrical resistivity of the PAni/c-MWNT nanocomposites were examined with thermogravimetric analysis (TGA) and a conventional two-probe method. The TGA data indicate that the thermal stability of the nanocomposites improved after the incorporation of c-MWNTs. The influence of temperature on the resistivity of the nanocomposites was also measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Novel approach in investigation of the poly(acrylic acid) hydrogel swelling kinetics in water

The swelling kinetics curves of structurally defined poly(acrylic acid) hydrogel in bidistilled water at temperatures: 25, 30, 35, 40, and 45°C were determined. The possibility of kinetically explaining the isothermal swelling process by applying the following models: reaction controlled by diffusion, first order chemical reaction kinetics, and second order chemical reaction kinetics, was investigated. It was found that kinetically explaining the swelling process using these methods was limited to only certain parts of the process. The swelling process in bidistilled water was described in full range assuming that the hydrogel's swelling rate was a kinetically controlled reaction by the rate of the movement of reactive interface of hydrogel. Based on that model, the kinetic parameters, activation energy (E_a) and preexponential factor (A), of the swelling process were determined to be E_a = 35 kJ/mol and lnA = 8.6. A possible mechanism of the investigated swelling process was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Measurement accuracy enhancements for wideband modulated signals

Time‐domain waveform measurements of wideband modulated signals, although attractive for communication systems modeling applications, have until now lacked the required accuracy for quantitative analysis. New developments described here enhance the accuracy of these measurements, enabling their application to communication system characterization and modeling. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 32–39, 2003.     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.     

Measurement of metal nanolayers optical parameters using surface plasmon resonance method

The results of experimental definition of optical parameters of silver nanolayers by the method of surface plasmon resonance (SPR) are described. The goniometric installation for measurement of angular dependences of reflection of light by layered nanosructures at the attenuated internal reflection (angular spectrum of reflection) is designed. Calculation of optical parameters of nanolayers is executed taking into account the form of a curve of tin angular spectrum of reflection. The text was submitted by the authors in English.     

A study of the static and dynamic properties of side-chain liquid crystalline polymers in low molar mass mesogens

The static and dynamic properties of solutions of a side chain polysiloxane liquid crystal polymer have been studied in a cyanobiphenyl nematic host as a function of concentration and temperature. Refractive index measurements were carried out on aligned samples and the data used to determine the macroscopic order parameter, S, using Haller's method. Photon correlation spectroscopy has been used to measure ($\text{k}{}_{22}\text{γ}{}_1$) for the pure nematic solvent and the solutions. From these measurements it appears that the static properties vary slowly and linearly with increasing polymer concentration whilst the dynamic or viscoelastic properties change markedly. This change has been attributed to γ₁, the twist viscosity, and the results have been discussed in terms of the function of the siloxane polymer backbone.     

针对语音变换的语音篡改检测

针对使用语音变换技术的语音篡改,提出一种自动检测方法。在分析语音变换基本模型和变换语音失真的基础上,提取语音信号的声道参数以及相关的信号统计量,并通过支持向量机递归特征消除法,选择出对语音变换比较敏感的特征作为分类特征,使用支持向量机进行语音变换检测和变换语音的说话人性别判别。对于一种语音变换软件的实验结果表明,该方法具有较高的检测准确率,其中语音变换检测的平均准确率为94.90%,变换语音的说话人性别判别平均准确率为92.09%。     

高速列车浮式地板振动响应有限元分析

针对采用试验方法开发高速列车浮式地板耗时耗力,且试验规模小,不能反映整车的振动效果的问题,基于有限元法进行高速列车振动响应分析.对三明治夹芯理论、蜂窝板理论和等效板理论进行比较,确定采用等效板理论数值模拟某浮式地板中的蜂窝板;利用橡胶材料的超弹性理论拟合橡胶材料参数;建立完整模型模拟实际工况下浮式地板的振动响应,得到浮式地板的隔振效果.结果表明此浮式地板的隔振效果约为90%,满足设计要求.