交流电量的实时检测技术及实现

针对电力参数的实时高精度检测难题，介绍了一种用于交流电量(电压、电流、有功功率、功率因数、频率等)的采用双速率同步交流采样算法的实时自动检测技术。该系统基于16位单片机，以交流电量为检测对象，通过对工频的跟踪检测和双速率同步交流采样算法，提高系统的检测精度。文中阐述了该技术的原理、硬件实现和软件设计。经过实践证明，该技术在电力系统的智能检测中有很大的应用前景。     

细丝窄间隙埋弧焊工艺参数寻优

主要研究A105钢小直径焊丝埋弧焊时,电弧电压、焊接电流和焊接热输入对焊缝成形的影响.在反复调节不同焊接工艺参数进行平板表面堆焊试验的基础上,得出保证最佳焊缝成形时,电弧电压与焊接电流的关系,以及它们的最佳匹配值,并量化了焊接热输入与焊缝宽度之间的关系.为窄间隙埋弧焊提供了有益的经验,同时也为小直径焊丝焊接工艺的全面优化奠定基础.     

基于CAE技术的汽车前保险杠成型工艺优化研究

介绍了利用CAE技术优化汽车保险杠的浇口设置,在优化方案的基础上,结合经验设计冷却系统,通过正交试验的方式确定保险杠成型工艺参数对翘曲变形的影响程度,得出最佳的工艺参数组合,用以指导生产实践。     

Influence of process parameters on thermal-rate treatment of ZA42 alloy

Sand casting process and directional solidification technique combining thermal-rate treatment(TRT) were used. The influence of process parameters on TRT was investigated according to the values of impact toughness. At the same time, the mechanism of TRT was discussed. The results showed that TRT can improve the impact toughness of this alloy, while the hardness is basically constant. The time of heat preservation should not be more than 5min. Different forms of cooling intensification additive have different effects among which the zinc ingot solidified in graphite mold is the best one that can improve impact toughness of samples by more than 80%. With increasing the cooling temperature, the value of α(Al) crystal lattice constant increases. The element Sb has negative effect on TRT.     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

低温等离子体处理纤维素纤维的机理和性能研究

本文应用不同技术参数的低温等离子体对Lyocell纤维进行处理,借助SEM等手段对其表面特征和物理性能进行研究,通过化学热力学和化学动力学,对反应机理做了研究和分析,证明了通过这种新型手段对Lyocell纤维进行接枝和改性的可行性和优越性,并针对Lyocell纤维的一些相关性能进行了处理前和处理后的比较,结果表明低温等离子体处理后的Lyocell纤维在不降低物理机械性能的同时很大程度上减少了纤维的原纤化。     

Design of fluidized bed photoreactors: Optical properties of photocatalytic composites of titania CVD-coated onto quartz sand

Volumetric optical properties (spectral absorption, scattering and extinction coefficients) of differently expanded narrow-path fluidized beds (FB) of a photocatalyst obtained by plasma-CVD deposition of titania onto quartz sand, relevant for photoreactor design purposes, are determined by using an unidirectional and unidimensional (1DD) model for the solution of the radiative transfer equation (RTE). Two simplified approaches are used: a Kubelka-Munk (KM) type of solution, by which the RTE is transformed into a pair of ordinary differential equations, and a discrete ordinate method (DOM) by which the complete RTE is transformed into an algebraic system that can be solved computationally. The second approach was validated by introducing the obtained optical parameters into a more elaborated bi-directional and two-dimensional (2DD) DOM model. Despite its simplicity, the KM method was able to yield fair order-of-magnitude estimates of the spectral optical properties of these FB.     

工业过程的先进控制

在分析工业过程特点的基础上，总结了工业过程先进控制的发展现状，阐述了PID控制器参数整定和模型预测控制的基本概念和内容，讨论了工业过程先进控制的核心内容及其带来的可观的经济效益，并探讨了先进控制软件的产业化问题。     

中国是世界拱坝大国也是世界拱坝强国——在《特高拱坝建设总结及安全运行管理研究》会议上的发言

中国拱坝数量占全世界的40%,数量最多;世界最高的三座拱坝都在中国,因此中国是世界拱坝大国。中国解决了岩溶地区拱坝防渗、狭窄河谷拱坝大流量泄洪等技术难题,发展了碾压混凝土拱坝筑坝技术。中国学者首创大坝混凝土标号分区技术,首创混凝土坝温度应力理论体系,解决了大坝裂缝这一世界性难题;建立了拱坝优化理论、混凝土坝仿真分析方法、混凝土坝有限元等效应力方法、混凝土坝数值监控方法等,在拱坝设计和科研上取得了全世界最多的重要成果,因此中国既是世界拱坝大国,又是世界拱坝强国。