烧碱蒸发过程自动化控制原理

详细介绍了烧碱蒸发自动控制模型尤其是浓度数学模型建立的原理和具体方法，并指出了在实际运行中应注意的问题，使出料质量分数能平稳地控制在30.0%-30.5%之间。根据现有的浓碱冷却流程，制定了科学合理的浓碱冷却和冷却系统冲洗控制方案。     

基于时间Petri网的AADL模型

随着嵌入式系统设计日益复杂,对系统的描述也提出了越来越高的要求,特别是实时性能。因此如何描述实时性能逐渐受到重视。在嵌入式系统中,线程的时间属性影响着系统的实时性,因此在设计早期利用AADL描述线程,但是AADL只是一种半形式化的语言,不够精确,并可能产生二义性。因此,把AADL模型转化为时间Pe砸网,但是时间Petri网不能很好地表示AADL的时间属性。故在研究AADL模型的时间属性的基础上,针对时间Petri考虑区域值延时与固定延时,并把固定延时当作区域值时延的一种特殊情况。最后给出针对AADL模型转化为时间Petri网的相应规则。     

一种优化内容适配技术的设计与实现

针对传统内容适配技术的特点和目前手机浏览器的发展现状,本文提出优先适配浏览器的内容适配技术。在传统内容适配技术上增加uA特征串和Accept特征串作为内容适配参数,并设计浏览器优先终端、终端优先Accept的适配规则。综合网络侧适配和终端侧适配优点,有效优化终端上的内容适配率,使得终端能够动态地、智能地针对不同的手机浏览器适配最佳的浏览版本。     

The effect of vacuum evaporation plating on phase structure and electrochemical properties of AB5–5 mass% LaMg3 composite alloy

In this paper, Cu, Al and Ni were plated on the AB₅–5 mass% LaMg₃ composite hydrogen storage alloy using a vacuum evaporation plating method. The phase structure and the electrochemical properties were investigated. The X-ray diffraction (XRD) analysis shows that the phase structure is not changed obviously after the plating Cu, Al and Ni on the composites. The electrochemical tests show that maximum discharge capacity, high rate dischargeability (HRD), dischargeability at low temperature and cyclic stability was improved by vacuum evaporation plating Cu, Al and Ni. Maximum of discharge capacity of the AB₅–5 mass% LaMg₃ composite alloy plating Ni can reach 351 mAh/g, which is 3.5% higher than that of the untreated. HRD at I_d = 1200 mA/g of the composite alloy plating Cu is 45.0% of that at 60 mA/g, which is 20.4% higher than the untreated. Discharge capacity of the composite alloy plating Cu at low temperature 233 K is 205 mAh/g, which is 57.3% of that at 298 K, and it is much higher than 36.8% of the untreated composites. The discharge capacity retention of the composite alloy plating Al after 200 cycles is 7.8% higher than the untreated.     

Evaporative Heat Transfer of Annular Two-phase Flow of Air-water in a Small Vertical Tube

The evaporative heat transfer of the non-boiling annular two-phase flow of air-water in a small vertical tube with uniform wall heat flux was studied both theoretically and experimentally. A simplified two-phase flow boundary layer model was used to calculate the thickness of the water film attached to the wall, and from the liquid film thickness the evaporative heat transfer coefficients of the annular two-phase flow were obtained. Theoretical equations and semi-theoretical equations were proposed for predicting the evaporative heat transfer of the annular two-phase flow of air-water in a small vertical tube. The semi-theoretical prediction agrees well with the experimental data. The mechanism of the heat transfer enhancement is the evaporation of the thin liquid film attached on the wall.     

48%烧碱蒸发装置运行总结

介绍了薄膜蒸发器在烧碱浓缩中的应用,阐述了质量分数为48%的烧碱蒸发装置的进料、出料、冷碱、真空系统的工艺及运行情况,72 h考核验收及产品质量分析显示,达到了预期目标.     

液氯气化工艺及安全

介绍了液氯气化的工艺过程及所采取的相应安全措施。     

透明管内的喷射升膜蒸发

<正>在化工、食品和制药工业中经常遇到热敏性物料的浓缩问题。液膜式蒸发器属于一次通过式蒸发器,其停留时间足够短,可减压操作,适用于热敏性物料的浓缩。液膜式蒸发器分升膜、降膜和升降膜式,升膜和升降膜蒸发器的升膜部分的输送动力通常用料液泵。郭雪岩等为蒸发浓缩小处理量的热敏性物料而开发了一种新型蒸发器,其升膜的输送动力用蒸气喷射,尽管前人对绝热两相流和垂直管内的流动沸腾进行了大量的研究,对这种特殊的流动沸腾的研究仍是必要的。文献[2]对蒸气加热的恒壁温条件下的蒸气喷射升液的升膜蒸发进行了实验研究和理论分析。本文的喷射升膜蒸发实验研究是在透明的石英管内,在恒热通量下进行,在石英玻璃管外壁镀一层极薄的透明导电膜,这既可以电加热又不影响观察管内的流动现象。本研究包括对蒸气喷射升膜流动状态的观测和恒热通量条件下喷射蒸发传热的实验研究。     

Urban water demand,climatic variation,and irrigation-water insecurity: interactive stressors and lessons for water governance from the Angat River basin (Philippines)

Climatic variation and intersectoral water competition increasingly challenge the effective provision of irrigation services. This article explores their combined effects on irrigation allocation from the Angat Reservoir (Philippines), where domestic water use in Metro Manila has overtaken regional irrigation as the dominant right-holder. Rules protecting Metro Manila’s large right to water ‘interact’ with dry spells to affect irrigation security in wet and dry seasons. Historically, irrigators were uncompensated because re-allocation’s cause was contested as (1) an unforeseeable climatic event (releasing domestic utilities of liability), or (2) produced by urban demand (requiring compensation). Trade-off rules must be prepared to navigate combinatory effects.     

一种基于不确定规则的数据时效性判定方法

数据过时是影响数据质量的重要因素,因此判定数据时效性对于提高数据质量至关重要.当前判定数据时效性的方法可分为两类:基于时间戳的方法和基于规则的方法.基于时间戳的方法要求精确完整的时间戳,但这样的时间戳在很多应用中不存在.基于规则的方法不要求时间戳,但现有方法均依赖于冗余元组,且不能对数据时效性做出定量判定.同时,这些方法均基于确定规则,无法表达不确定的领域知识.针对上述问题,提出不确定时效规则及相应的数据时效性模型.基于该模型,进一步给出了两个可定量地判定数据时效性的算法.同时,还给出了时效规则的学习算法.真实数据上的实验结果验证了算法的有效性.