The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

Numerical solution of the kinematic dynamo problem for Beltrami flows in a sphere

The article discusses computational aspects of the kinematic problem of magnetic field generation by a Beltrami flow in a sphere. Galerkin's method is applied with a functional basis consisting of Laplace operator eigenfunctions. Dominant eigenvalues of the magnetic induction operator and associated magnetic eigenmodes are obtained numerically for a certain Beltrami flow for magnetic Reynolds numbers up to 100. The eigenvalue problem is solved by a highly optimized iterative procedure, which is quite general and can be applied to numerical treatment of arbitrary linear stability problems.     

有机盐聚合醇氯化钾钻井液的应用

霍尔果斯背斜构造极其复杂,内应力极高,地层倾角大,断层、破碎带多,并存在高低压互层;安集海河组的灰绿色软泥岩水化严重并具有粘弹塑性.该区块重点探井霍003井三开、四开井段选用有机盐聚合醇氯化钾钻井液,同时为保证钻井液在高密度下（2.55 g/cm^3）具有好的流变性,使用活化铁矿粉、活化重晶石加重.应用结果表明,由于采用了强抑制和多元封堵的措施,该钻井液具有良好的流变性和较强的携带能力,钻进中曾携带出重2.8 kg和5.1kg的大掉块;滤失量低,泥饼质量好,封堵能力强,造壁能力强,减轻了井下阻卡程度;有良好的储层保护能力;在室内研究的基础上,经过现场合理使用和维护钻井液,霍003井提高了机械钻速,缩短了钻井周期,井身质量优于邻井.指出在高密度下,未选出适合有机盐聚合醇氯化钾钻井液的稀释剂,钻井液流动性较差.     

鸭池河水电站压力钢管外压稳定性设计

采用解析法和半解析有限元法分别对鸭池河水电站埋藏式加劲压力钢管进行外压稳定性计算。在计算分析过程中,考虑了初始缺陷因素对埋藏式加劲压力钢管抗外压稳定性的影响,使得计算结果更加接近于工程实际;从而为埋藏式加劲压力钢管的外压稳定性计算提出了一种更加行之有效的方法。     

Tunnel stability and arching effects during tunneling in soft clayey soil

A series of centrifuge model tests and numerical simulations of these tests were carried out to investigate the surface settlement troughs, excess pore water pressure generation, tunnel stability and arching effects that develop during tunneling in soft clayey soil. The two methods were found to provide consistent results of the surface settlement troughs, excess pore water generation, and the overload factors at collapse for both single and parallel tunneling. The arching ratio describes the evolution of the arching effects on the soil mass surrounding tunnels and can be derived from the numerical analysis. The boundaries of the arching zones for both single tunneling and parallel tunneling were determined. In addition, the boundaries of the positive and negative arching zones were also proposed.     

堆载预压法加固软基土体稳定性的有限元分析

堆载预压过程中,进行相应的稳定分析对于控制加载速率、确定加载高度是必须进行的一项工作,采用有限单元法对此进行了探讨,详细阐述了有限元理论分析边坡稳定的几种重要因素,并考虑分步堆载的特点,模拟堆载过程,具有一定的工程实际意义。     

水力自动翻板闸门的瞬心轨迹及其对稳定性的影响

分析了连杆滚轮式水力自动翻板闸门的运动轨迹，并由此得出闸门动、静坐标系间的转换关系．结合翻板闸门的运转机理，探讨了闸门在运行过程中的瞬心轨迹线及其对闸门稳定性的影响．结果表明，通过优化闸门结构可调整“瞬心”的位置，保证闸门运转的稳定性．     

A study of arc stability of basic electrode in view of uniform design method

In order to develop a basic electrode with low fume and good usability, a uew slag system has been designed after analyzing several basic electrode slag systems. Then in view of uniform design method, arranging the experiment points by it, the influenced laws of the uew system coating compouents on the arc stability had been searched. In the formula, niue coating compouents were taken as independent variables and they were divided into six levels in all twenty-four experiments. The arc stability was taken as function and taken down the data when welding and then put them into the computer to be processed statistically. The analysis results give the mathematical model and trend diagrams between independent variables and the function. They indicate that the effects of many coating compouents on the arc stability are in the mutual form. The mutual effects between CaCO3 and BaF2, BaF2 and BaCO3 , increases the arc stability separately. While the mutual effects between CaF2 and iron powder, the square item of iron powder itself decreases the arc stability separately.     

铝电解槽磁流体稳定性有限元分析

本文采用有限元法求解分层磁流体小扰动方程系统特征值，研究铝电解槽稳定性。研究结果表明，在没有电磁力时，铝液表面波动（内波）是稳定的。存在电磁力时，它会激发铝液表面波动的某些低频长波分量不稳定性，高频短波不受影响。被激发的不稳定波动频率和扰动增长率与电流密度，磁感应强度垂直分量，铝电解槽长宽比，电解质和铝液的密度差，厚度等因素密切相关。减少电流密度，磁感应强度，增加电极距离和铝液厚度可以提高铝电解槽的稳定性。这对铝电解槽优化设计和在线控制有重要意义。     

深孔预裂爆破在溢洪道高边坡开挖的应用

高边坡深孔预裂爆破是一项对施工质量、安全要求极高的爆破技术, 必须进行科学的爆破技术设计,确定合理的爆破参数;高度重视爆破钻孔工艺、装药工艺、网络工艺以及边坡稳定性地质分析.在洞巴水电站中不允许采用超欠平衡的开挖方法进行施工,利用设计台阶高度,采用深孔预裂爆破对溢洪道高边坡的稳定及开挖平整度进行有效控制,取得良好效果.