An investigation of laser-assisted machining of Al2O3 ceramics planing

Laser-assisted machining (LAM), an alternative method of fabricating difficult-to-machine materials, uses primarily laser power to heat the local area (without necessarily evaporating or melting any material) before the material is removed. It not only efficiently reduces the cutting force during the manufacturing process but also improves the machining characteristics and geography with regard to difficult-to-machine materials, especially structural ceramics.This study on the application of laser-assisted machining to Al₂O₃ ceramics examines the measurements of cutting force and workpiece surface temperature as well as surface integrity and tool wear. Specifically, it uses the lattice Boltzmann method (LBM) to calculate the temperature distribution inside the ceramic workpiece during the LAM process and ensure that the laser energy causes no subsurface damage. The experimental results reveal that the LAM process efficiently reduces the cutting force by 22% (feed force) and 20% (thrust force) and produces better workpiece surface quality than conventional planing.     

滚切剪剪切力的实验研究

对直导向滚切剪的剪切力进行了实验研究，得到了计算最大剪切力的经验公式。     

Al-18%Si合金在梯度强磁场中凝固时初生硅的行为

研究了Al-18%Si合金在10 T梯度强磁场下加热至半固态和全熔态后的凝固过程,观察了初生硅的分布和形态,测定了其冷却曲线.结果表明:在磁场的磁感应强度和磁场梯度的乘积Bz·dBz/dz为正时,初生硅向上部聚集;而在Bz·dBz/dz为负时,初生硅向下部聚集;在强磁场下,加热至全熔态冷却下来的凝固组织中初晶硅的形态发生了明显的改变,由板片状转变为块状,初晶硅显著细化.对强磁场细化初晶硅的机制进行了探讨.     

奥氏体不锈钢车削时刀具磨损对切削因素和表面质量的影响研究

研究了奥氏体不锈钢车削加工过程中刀具后刀面磨损对切削力、切削温度、粗糙度及残余应力影响规律。试验结果表明:当刀具后刀面磨损在一定范围内,F_x与F_z随磨损量的增加而显著增大,而F_y基本保持不变;温度随刀具后刀面磨损量增加而显著增大;工件的表面粗糙度随刀具后刀面磨损量增大而增大;当车刀后刀面磨损为0.167 mm时,工件加工表面的残余应力最大。     

电磁成形中的测量

本文简要介绍了电磁成形中放电电流、管坯与线圈间隙中的磁场测量 ,以及管坯动态变形过程测量的各种方法。通过各种方法的比较分析 ,得出分流器法测放电电流、探测线圈法测感生磁场是切实可行的方法。金属坯料在电磁力作用下的变形过程可用撞针法和高速摄影的办法进行测量 ,每种方法各有其优势和适用范围 ,测量时 ,根据实际情况进行选用。     

板料成形中的新型可控压边力技术研究

板料成形中,压边力是控制板料流动的重要因素。前人大量的研究表明,在拉伸成形的不同行程施加合适的变压边力(VBHF),可有效避免板料成形中起皱和破裂的缺陷。文章基于压边力成形窗口的定义和分析,提出新的控制目标,并采用PID闭环控制策略来优化不同冲压行程中分块压边圈上的压边力。针对一个具有不同角部半径的盒型件进行了闭环的变压边力优化模拟,得到其不同位置的分块压边圈随行程变化的最优压边力曲线,并在变压边力压机上进行实验验证,结果表明,使用铝合金板料并在恒定压边力下难以成形的盒形件,在最优变压边力下成功成形。     

用原子力显微镜观察菁染料聚集体

对应用原子力显微镜观察菁染料聚集体的文献进行了评述 ,在此基础上采用原子力显微镜观察了 2个感绿增感染料的聚集体     

钢管除锈机设计与经验

介绍了钢管除锈机的基本原理及设计过程,实践证明:使用钢管除锈机不仅保证了除锈质量,还提高了工作效率。     

Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures—An AFM study

Atomic force microscopy (AFM) has been used to study the morphology and microstructure of an amine-cured epoxy before and after outdoor exposure. Measurements were made from samples prepared in an essentially CO₂-free, H₂O-free glove box and from samples prepared in ambient conditions. For those prepared in a CO₂-free glove box, AFM imaging was conducted on (1) an unexposed air/coating surface, (2) an unexposed coating bulk, (3) an unexposed coating/substrate interface, and (4) a field exposed air/coating surface. For samples prepared in ambient conditions, only the unexposed air/coating surface was investigated. The same regions of the exposed samples were scanned periodically by the AFM to monitor changes in the surface morphology of the coating as UV exposure progressed. Small angle neutron scattering and Fourier transform infrared spectroscopy (FTIR) studies were performed to verify the microstructure and to follow chemical changes during outdoor exposure, respectively. The results have shown that amine blushing, which occurs only under ambient conditions, had a significant effect on the surface morphology and microstructure of the epoxy. The surface morphology of the samples prepared under CO₂-free, dry conditions was generally smooth and homogeneous. However, the interface and the bulk samples clearly revealed a two-phase structure consisting of bright nodular domains and dark interstitial regions, indicating an inhomogeneous microstructure. Such heterogeneous structure of the bulk was in good agreement with results obtained by small angle neutron scattering of unexposed samples and by AFM phase imaging of the degraded sample surface. The relationship between submicrometer physical changes and molecular chemical degradation is discussed. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

流量对事故闸门门体水力荷载影响数值模拟研究

抽水蓄能电站事故闸门动水闭门可靠性及门体水力荷载特性一直是闸门设计和运行中的核心问题,本文通过数值模拟,对响水涧抽水蓄能电站上库进水口事故闸门在不同事故流量工况下动水闭门过程的门体水力荷载进行研究,并与模型试验结果进行比较分析,相同事故工况的数值计算成果和模型试验成果吻合较好,表明采用RNG k~ε模型和VOF方法对平面闸门动水关闭的非恒定流过程进行数值模拟能够取得较好的结果。数值模拟计算结果表明流道的过流量对事故闸门门体水力荷载影响显著,初始事故流量越大,闸门动水关闭过程中闸门区满流向明流过渡时刻的闸门相对开度越大,闸门上游底缘上托力越小,事故闸门动水闭门的持住力相应越大。事故流量由151 m~3/s增大至800 m~3/s时,闭门持住力增大约20%。计算分析结果可为相关闸门的设计和运行提供参考。