基于SAP项目的物料分类及特性的技术实现

结合中国广东核电集团的SAP实施项目中的物料管理,阐述了项目实施中的物料主数据、物料分类、分类属性的实际应用和解决方案和技术实现。通过合理地组织和管理各种数据,对提高系统性能和实现企业的业务发展目标具有参考作用。     

M701F型燃气轮机的在线运行负荷特性

分析了重型燃气轮机负荷特性的影响因素,提出了研究重型燃气轮机负荷特性的技术路线。基于此,针对某M701F型燃气轮机,以国际标准化组织(International Organization for Standardization,ISO)的标准条件为基准,由机组的在线运行数据获得其负荷特性曲线,并建立负荷特性的数学模型。考察该燃气轮机6 940组实际数据,得出结论:当折算基准功率不小于18MW时,其负荷特性数学模型的最大相对误差不超过5.73%。     

垃圾焚烧发电技术主要问题及其对策

介绍了我国城市生活垃圾的主要处理方式;通过对国内外情况的比较与分析,得出我国城市生活垃圾处理的最佳方式是CFB焚烧(垃圾与煤可混烧)发电;介绍了CFB发电技术的特点、工艺流程、存在的问题及未来的发展前景。     

从水坝工程看我国公众理解工程的问题与对策

At present, the study of “public understanding of engineering” in China has just started, and it can be said that there is adequate research space. Making the public understanding of dams in China as a starting point, this paper analyzes the importance and the present situation of “public understanding of engineering”, and makes some analysis and recommendations on how to promote and facilitate the public understanding of engineering.     

A test of independence based on a generalized correlation function

In this paper, we propose a novel test of independence based on the concept of correntropy. We explore correntropy from a statistical perspective and discuss its properties in the context of testing independence. We introduce the novel concept of parametric correntropy and design a test of independence based on it. We further discuss how the proposed test relaxes the assumption of Gaussianity. Finally, we discuss some computational issues related to the proposed method and compare it with state-of-the-art techniques.     

气动工具的噪声防治

气动工具在我国机械制造等各行业广泛应用的同时,工作时的排气噪声对周围环境也造成了一定的污染。介绍了治理噪声所采用的消声装置及设计方法,通过消声后的试验数据及噪声频譜对比分析,用正交试验法解决功率与噪声的矛盾,通过这种方法使噪音降低最大,功率损耗最小,这种消声装置原理治理噪声效果显著。     

The thermochemical behavior of some binary shape memory alloys by high temperature direct synthesis calorimetry

The standard enthalpies of formation of some shape memory alloys have been measured by high temperature direct synthesis calorimetry at 1373 K. The following results (in kJ/mol of atoms) are reported: CoCr (−0.3 ± 2.9); CuMn (−3.7 ± 3.2); Cu₃Sn (−10.4 ± 3.1); Fe₂Tb (−5.5 ± 2.4); Fe₂Dy (−1.6 ± 2.9); Fe₁₇Tb₂ (−2.1 ± 3.1); Fe₁₇Dy₂ (−5.3 ± 1.7); FePd₃ (−16.0 ± 2.7); FePt (−23.0 ± 1.9); FePt₃ (−20.7 ± 2.3); NiMn (−24.9 ± 2.6); TiNi (−32.7 ± 1.0); TiPd (−60.3 ± 2.5). The results are compared with some earlier experimental values obtained by calorimetry and by EMF technique. They are also compared with predicted values on the basis of the semi empirical model of Miedema and co-workers and with ab initio calculations when available. We will also assess the available information regarding the structures of these alloys.     

检定S型短型热电偶的4种不同冷端补偿方法之比较

检定长度在200～700 mm范围内的S型热电偶时,由于参考端温度大都处于室温或者波动的温场之中,需要将参考端温度恒定在0℃或采取修正、补偿等措施进行修正。现采取检定中最常用的4种不同的冷端补偿方法检定同一支S型短型热电偶,对结果进行比较分析,得到这4种不同的冷端补偿方法的优劣性及其准确度排序。结果表明,将参考端应用达到一等标准热电偶准确度水平的同极性热电偶丝延伸至参考端恒温器方法能获得较为理想的补偿效果。     

Sphere mass center determination by velocity modulation

This paper presents a new technique, called velocity modulation, for measuring the mass center location of a sphere, improving upon the accuracy of previous methods by at least a factor of 4. The sphere is rolled down a set of parallel rails. The offset of the sphere’s mass center with respect to its geometric center modulates the sphere’s velocity at the rolling frequency, which is detected by a series of differential optical shadow sensors. The measured times that the sphere crosses the sensors is compared with a simplified mechanics model in order to recover the sphere’s mass center location. The precision of the technique is demonstrated by the repeatability of independent measurements in one plane of a 50.8 mm (2 in.) stainless steel gage sphere. The best standard deviation achieved is 145 nm (95% confidence interval = 227 nm).     

弧焊变压器焊接时触电的原因分析及防范措施

阐述了使用弧焊变压器施焊时产生触电的原因,并提出了安全使用弧焊变压器焊接时的措施。希望焊接人员摒弃错误的观念及麻痹思想,高度重视安全用电,确保人身安全。