Where does the end begin? Problems in musico-cognitive modeling

Research with computer systems and musical grammars into improvisation as found in the tabla drumming system of North India has indicated that certain musical sentences comprise (a) variable prefixes, and (b) fixed suffixes (or cadences) identical with those of their original rhythmic themes. It was assumed that the cadence functioned as a kind of target in linear musical space, and yet experiments showed that defining what exactly constituted the cadence was problematic. This paper addresses the problem of the status of cadential patterns, and demonstrates the need for a better understanding and formalization of ambiguity in musico-cognitive processing. It would appear from the discussion that the cadence is not a discrete unit in itself, but just part of an ever-present underlying framework comprising the entire original rhythmic theme. Improvisations (variations), it is suggested, merely break away from and rejoin this framework at important structural points. This endorses the theory of simultaneity. However, the general cognitive implications are still unclear, and further research is required to explore musical ambiguity and the interaction of musical, linguistic, and spatio-motor grammars.     

现代教育技术在大学物理实验教学中的应用

在信息技术高速发展的今天,现代教育技术在大学物理实验教学中的应用已逐步得到普及。本文从教学实际出发,研究了现代教育技术在大学物理实验课程教学中的应用,并从教学实践角度思考如何有效地运用现代教育技术来调动学生的学习积极性和主动性,提高教学效果。     

Physiological arousal, dissonance, and attitude change: Evidence for a dissonance-arousal link and a "Don't remind me" effect.

Two experiments, with 80 undergraduates, replicated and extended research by R. T. Croyle and J. Cooper (see record 1984-11595-001) indicating that cognitive dissonance involves physiological arousal. In Exp I, Ss wrote counterattitudinal essays under conditions of high or low choice and, to assess arousal effects owing to effort, with or without a list of arguments provided by the experimenter. In high-choice conditions only and regardless of effort, Ss showed both arousal (heightened galvanic skin response) and attitude change. Arousal, however, did not decline following attitude change. The more effortful task (no arguments provided) produced increased arousal but not greater attitude change. In Exp II, the opportunity to change one's attitude following a freely chosen counterattitudinal essay was manipulated. As in Exp I, arousal increased following the essay but did not decline following a postessay attitude change opportunity. When Ss were not given an attitude change opportunity, however, arousal did decline. It is suggested that if dissonance is a drive state, drive reduction typically may be accomplished through gradual cognitive change or forgetting. (47 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

冷切锯片的设计及毛刺抑制试验研究

根据工厂的实际需要研究设计出新型薄壁型钢用冷切锯片.通过工厂试验研究了锯切过程中锯齿磨损、锯切断面毛刺高度和锯切功率的变化规律.在此基础上,综合考虑了锯齿的锋利性、抗冲击性能、耐磨性和切屑容积等因素,对试验锯片进行了反复改进.最终确定的狼牙齿形锯片具有良好的综合性能,能有效的抑制毛刺高度、降低锯切功率、延长使用寿命.特别适用于薄壁型钢的冷态锯切.这种锯片在抑制毛刺生成及延长寿命方面取得较好的效果.     

基于生物启发计算的警用流动人口分析系统

目前对流动人口的管理仅停留在数据查询比对和简单统计上,缺少对数据的深层次分析,难以对决策指挥提供支持。针对流动人口的分析问题,提出了构建一个基于生物启发计算的智能分析系统,用于发现流动人口中各类人员的流动模式以及流动人口的趋势性问题,找出异常的流动信息和模式。该系统综合运用了前沿的生物启发计算技术——基于多层染色体基因表达式编程算法、重叠基因表达进化算法、基于概念相似度神经网络分类模型和层次距离计算的聚类算法搭建了一个警用流动人口的分析平台。同时根据实际需求,提出了一种新的基于智能分析结果的分级报警模型。实验表明系统具有较高的性能和实用性。     

船舶钢板激光弯曲成形的实验研究

在对船舶钢板激光弯曲成形过程进行实验研究中，采用CO2激光器研究了激光功率、扫描速度、扫描次数以及钢板厚度对船舶钢板激光弯曲成形的影响规律。实验中实时测量了船舶钢板激光弯曲成形过程钢板弯曲角度和温度的变化。结果表明：钢板弯曲角度随激光功率的增加而增加，随激光束扫描速度的增加而减小，而且随着钢板厚度的增加，弯曲角度减小；激光工艺参数和钢板厚度都对钢板激光多次扫描成形产生影响，钢板的弯曲角度随着激光扫描次数的增加而增加。对于较薄的船舶钢板，钢板弯曲角度随扫描次数增加近似呈线性增加，而较厚的钢板，随扫描次数的增加，钢板弯曲角度的增加逐渐减小。     

BP神经网络在液压试验台故障诊断中的应用

分析了BP神经网络的结构及算法，并对液压试验台的故障模式用BP神经网络来进行诊断，从而提出了一种新的解决液压试验台故障诊断的方法。     

用正交实验设计研究Zr—Nb合金的耐蚀性

利用正交设计实验的方法安排了一组Ｚｒ－Ｎｂ二元合金，考查了两个水平的Ｎｂ含量，淬火温度，时效温度，时间以及合金组织状态对耐蚀性能的影响，５００℃蒸汽腐蚀结果表明，Ｎｂ含量控制在固溶极限范围内Ｚｒ－Ｎｂ二元含金具有较佳的耐蚀性，而当Ｎｂ含量较高时，采用双相区淬火，较高温度长时间时效处理是获得较好耐蚀性的工艺方向。     

齿轮精锻的数值模拟与实验研究

本文对空心直齿圆柱齿轮的精锻成形过程进行三维刚塑性有限元模拟和实验研究。通过有限元数值模拟和实验研究 ,得出了直齿圆柱齿轮精锻过程的金属流动规律和变形力学特征 ,揭示了直齿圆柱齿轮精锻过程的变形机理 ,数值模拟结果与实验结果吻合较好     

一种新型针状合金-金刚石复合钻头胎体配方的试验研究

本文首先介绍一种用于卵砾石地层钻进的新型针状硬质合金钻头的设计原理，而后简要说明其胎体配方组成机理。在分析胎体性能要求的基础上，选择了六组配方，对其进行抗弯强度、抗剪强度，硬度性能、冲击韧性、SEM照片等试验，优选了四号配方，试制了钻头。生产试验结果表明，这种新型复合型钻头钻进萝日砾石地层的平均时效1．89m／h、平均每回次进尺为2．3m，平均钻头寿命19．81m，具有实用和推广价值。