探讨单侧下回风局部百级洁净区的影响因素

本文运用CFD技术以疫苗车间接毒无菌室为例,探讨了干扰采用FFU单侧下回风形式的局部百级洁净区流场的各种因素和影响程度,这对类似局部百级洁净区的优化设计具有较重要的理论意义与工程应用价值。     

X射线二极管平响应滤片的制作

针对X射线二极管平响应滤片的设计要求,采用电子束蒸发生长薄金层、紫外光曝光光刻、微电镀厚金层、体硅腐蚀制作镂空结构和等离子体刻蚀去掉PI等技术,成功制备了阵列结构的圆孔直径为5μm,周期为10.854μm,金层厚度分别为50,400nm的薄、厚两种金层滤片。电镀过程中采用台阶仪多次测量图形四周电镀厚度后取均值的方法得到尽可能准确的电镀厚金层。滤片交付实验后,在X光能量0.1～4keV取得的平响应曲线标准偏差与均值之比在13%以内,可以满足相关单位的具体物理研究实验要求。     

Preclinical In Vitro Model to Assess the Changes in Permeability and Cytotoxicity of Polarized Intestinal Epithelial Cells during Exposure Mimicking Oral or Intravenous Routes: An Example of Arsenite Exposure

The gastrointestinal tract (GIT) is exposed to xenobiotics, including drugs, through both: local (oral) and systemic routes. Despite the advances in drug discovery and in vitro pre-clinical models, there is a lack of appropriate translational models to distinguish the impact of these routes of exposure. Changes in intestinal permeability has been observed in different gastrointestinal and systemic diseases. This study utilized one such xenobiotic, arsenic, to which more than 200 million people around the globe are exposed via their food, drinking water, work environment, soil, and air. The purpose of this study was to establish an in vitro model to mimic gastrointestinal tract exposure to xenobiotics via oral or intravenous routes. To achieve this, we compared the route (mimicking oral and intravenous exposure to GIT and the dose response (using threshold approach) of trivalent and pentavalent inorganic arsenic species on the permeability of in vitro cultured polarized T84 cells, an example of intestinal epithelial cells. Arsenic treatment to polarized T84 cells via the apical and basolateral compartment of the trans-well system reflected oral or intravenous routes of exposure in vivo, respectively. Sodium arsenite, sodium arsenate, dimethyl arsenic acid sodium salt (DMA^V), and disodium methyl arsonate hydrate (MMA^V) were assessed for their effects on intestinal permeability by measuring the change in trans-epithelial electrical resistance (TEER) of T-84 cells. Polarized T-84 cells exposed to 12.8 µM of sodium arsenite from the basolateral side showed a marked reduction in TEER. Cytotoxicity of sodium arsenite, as measured by release of lactate dehydrogenase (LDH), was increased when cells were exposed via the basolateral side. The mRNA expression of genes related to cell junctions in T-84 cells was analyzed after exposure with sodium arsenite for 72 h. Changes in TEER correlated with mRNA expression of focal-adhesion-, tight-junction- and gap-junction-related genes (upregulation of Jam2, Itgb3 and Notch4 genes and downregulation of Cldn2, Cldn3, Gjb1, and Gjb2). Overall, exposure to sodium arsenite from the basolateral side was found to have a differential effect on monolayer permeability and on cell-junction-related genes as compared to apical exposure. Most importantly, this study established a preclinical human-relevant in vitro translational model to assess the changes in permeability and cytotoxicity during exposure, mimicking oral or intravenous routes.     

Responses of Growth,Oxidative Injury and Chloroplast Ultrastructure in Leaves of Lolium perenne and Festuca arundinacea to Elevated O3 Concentrations

The effects of increasing atmospheric ozone (O₃) concentrations on cool-season plant species have been well studied, but little is known about the physiological responses of cool-season turfgrass species such as Lolium perenne and Festuca arundinacea exposed to short-term acute pollution with elevated O₃ concentrations (80 ppb and 160 ppb, 9 h d⁻¹) for 14 days, which are widely planted in urban areas of Northern China. The current study aimed to investigate and compare O₃ sensitivity and differential changes in growth, oxidative injury, antioxidative enzyme activities, and chloroplast ultrastructure between the two turf-type plant species. The results showed that O₃ decreased significantly biomass regardless of plant species. Under 160 ppb O₃, total biomass of L. perenne and F. arundinacea significantly decreased by 55.3% and 47.8% (p < 0.05), respectively. No significant changes were found in visible injury and photosynthetic pigment contents in leaves of the two grass species exposed to 80 ppb O₃, except for 160 ppb O₃. However, both 80 ppb and 160 ppb O₃ exposure induced heavily oxidative stress by high accumulation of malondialdehyde and reactive oxygen species in leaves and damage in chloroplast ultrastructure regardless of plant species. Elevated O₃ concentration (80 ppb) increased significantly the activities of superoxide dismutase, catalase and peroxidaseby 77.8%, 1.14-foil and 34.3% in L. perenne leaves, and 19.2%, 78.4% and 1.72-fold in F. arundinacea leaves, respectively. These results showed that F. arundinacea showed higher O₃ tolerance than L. perenne. The damage extent by elevated O₃ concentrations could be underestimated only by evaluating foliar injury or chlorophyll content without considering the internal physiological changes, especially in chloroplast ultrastructure and ROS accumulation.     

Semi‐volatile organic compounds in the air and dust of 30 French schools: a pilot study

The contamination of indoor environments with chemical compounds released by materials and furniture, such as semi‐volatile organic compounds (SVOCs), is less documented in schools than in dwellings—yet children spend 16% of their time in schools, where they can also be exposed. This study is one of the first to describe the contamination of the air and dust of 90 classrooms from 30 nursery and primary schools by 55 SVOCs, including pesticides, phosphoric esters, musks, polycyclic aromatic hydrocarbons (PAHs), polychlorobiphenyls (PCBs), phthalates, and polybromodiphenylethers (PBDEs). Air samples were collected using an active sampling method, and dust samples were collected via two sampling methods (wiping and vacuum cleaning). In air, the highest concentrations (median >100 ng/m³) were measured for diisobutyl phthalate (DiBP), dibutyl phthalate (DBP), diethyl phthalate (DEP), bis(2‐ethylhexyl) phthalate (DEHP), and galaxolide. In dust, the highest concentrations (median >30 μg/g) were found for DEHP, diisononyl phthalate (DiNP), DiBP, and DBP. An attempt to compare two floor dust sampling methods using a single unit (ng/m²) was carried out. SVOC concentrations were higher in wiped dust, but frequencies of quantification were greater in vacuumed dust.     

The high‐speed measurement of a partial area imaging system applied to photoresist development processing

Abstract

Among the parameters that affect photolithography, the most important are exposure and development time which affect the coating photoresist characteristics. This study further researches the relationship between the exposure and development time using a high speed image inspection system, and the relationship between the development time and photoresist depth using a Scanning Probe Microscope (SPM). A partial scan CCD camera and high speed frame capture card were used to obtain the photoresist development processing parameters. The experimental results verified that this imaging system provides an economical and effective method for producing a micro‐photo‐etched product. It is expected that these experiments can also offer some good references useful in the micro electro mechanical industrial field.     

Measuring exertion time,duty cycle and hand activity level for industrial tasks using computer vision

Abstract

Two computer vision algorithms were developed to automatically estimate exertion time, duty cycle (DC) and hand activity level (HAL) from videos of workers performing 50 industrial tasks. The average DC difference between manual frame-by-frame analysis and the computer vision DC was ?5.8% for the Decision Tree (DT) algorithm, and 1.4% for the Feature Vector Training (FVT) algorithm. The average HAL difference was 0.5 for the DT algorithm and 0.3 for the FVT algorithm. A sensitivity analysis, conducted to examine the influence that deviations in DC have on HAL, found it remained unaffected when DC error was less than 5%. Thus, a DC error less than 10% will impact HAL less than 0.5 HAL, which is negligible. Automatic computer vision HAL estimates were therefore comparable to manual frame-by-frame estimates.

Practitioner Summary: Computer vision was used to automatically estimate exertion time, duty cycle and hand activity level from videos of workers performing industrial tasks.     

Quantitative risk assessment on the dietary exposure of Finnish children and adults to nitrite

Nitrite intake from the consumption of cured meat and tap water was estimated for Finnish children of 1, 3 and 6 years as well as Finnish adults of 25–74 years. Nitrite content in the foods was measured by capillary electrophoresis, and was then used together with individual food consumption data from the FINDIET 2007 and DIPP studies in a stochastic exposure assessment by a Monte Carlo Risk Assessment (MCRA) program. Nitrite intake from additive sources and tap water was assessed, and more than every 10th child between the ages 3 and 6 years was estimated to have a nitrite intake exceeding the acceptable daily intake (ADI) of nitrite. The high exposure levels were caused by frequent consumption of large portions of sausages, up to 350 g day^–1 or 750 g in 3 days, among the children. Median nitrite intake from cured meat was 0.016, 0.040, 0.033 and 0.005 mg kg^–1 body weight day^–1 for children of 1, 3 and 6 years and adults, respectively. Bayesian estimation was employed to determine safe consumption levels of sausages and cold cuts for children, and these results gave rise to new national food consumption advice.     

Visual differentiation and recognition memory of look-alike drug names: effects of disfluent format,text enhancement and exposure time

Abstract

Three computer-based experiments were conducted to examine whether disfluent format, enhanced text, and increased exposure time improve the accuracy of visual differentiation and recognition memory of look-alike drug names. A three-way, repeated-measures look-alike drug name differentiation test assessed the visual differentiation accuracy of 30 nursing students (Experiment 1) and 15 nurses (Experiment 2). A two-way, repeated-measures recognition memory test examined the recognition memory accuracy of 15 nurses for look-alike drug names (Experiment 3). We found that making drug names disfluent did not significantly improve differentiation (Experiment 2) or memory accuracy (Experiment 3), but even impaired differentiation accuracy (Experiment 1). Enhanced text and longer exposure time significantly improved differentiation accuracy (Experiments 1 and 2). However, the enhanced text did not improve recognition memory (Experiment 3). We suggest that making look-alike drug names disfluent is not favourable. Enhanced text and longer exposure times are effective in supporting visual differentiation of look-alike drug names.

Practitioner Summary: Confusion arising from look-alike drug names may compromise patient safety. Three experiments examined the effects of disfluent format, text enhancement and increased exposure time on visual and memory performances. Making drug names more difficult to read did not improve performance. Enhancing text design and increasing exposure (i.e. reading) time improved visual differentiation between medications, but did not improve the recognition of medications from memory.

Abbreviations: SEEV: Salience-effort-expectancy-value; FDA: Food and Drug Administration; ANOVA: analysis of variance; SD: standard deviation, DF: disfluent format; TE: text enhancement; ET: exposure time.