薄板坯表面变形实验分析

对连铸薄板坯的坯壳表面变形的物理模拟实验方法进行了分析,提出一种"铜裹铅双金属"新实验方案,并对坯壳表面弯曲变形进行了分析.     

竹坑水库大坝安全鉴定分析

在竹坑水库大坝安全鉴定中,认真分析了该工程存在的主要问题,并针对大坝的结构稳定和渗流稳定作了详细的分析论证.     

Polarisation behaviour of diode lasers with frequency selective feedback

The paper reviews recent results obtained with diode lasers used in external hybrid cavities with frequency selective feedback. Such cavities attract continuing interest for several reasons. They generate a tunable single laser mode with very low linewidths (usually a few tens of kilohertz). Very wide discrete tunable ranges over 100 nm for Fabry-Perot type and over 200 nm for quantum well lasers are achieved. They can be made to oscillate in a tunable mode having the desired polarization state,TE orTM and, in some cases, simultaneously atTE andTM. This is done by designing a cavity that increases strongly theTM/TE intensity ratio and by using coatings on one laser facet that greatly lower bothTE andTM reflectivities. High-speed polarization switching in the gigahertz range is possible by inserting passive or active polarization selecting elements in the cavity. For all these reasons hybrid external cavities are attractive for applications in optical metrology, spectroscopy and optical communications. Moreover, the external cavity configuration allows the study of physical mechanisms in the laser diode by inducing on purpose phenomena that would have been otherwise impossible to achieve with free-running lasers.     

Defect structure of gold introduced by high-speed deformation

The effect of deformation speed on defect structures introduced into bulk gold specimens at 298 K has been investigated systematically over a wide range of strain rate from ′=10⁻² to 10⁶ s⁻¹. As strain rate increased, dislocation structure changed from heterogeneous distribution, so-called cell structure, to random distribution. Also, stacking fault tetrahedra (SFTs) were produced at anomalously high density by deformation at high strain rate. The anomalous production of SFTs observed at high strain rate is consistent with the characteristic microstructure induced by dislocation-free plastic deformation, which has been recently reported in deformation of gold thin foils. Thus, the results of the present study indicate that high-speed deformation induces an abnormal mechanism of plastic deformation, which falls beyond the scope of dislocation theory. Numerical analysis of dislocation structure and SFTs revealed that the transition point of variation of deformation mode is around the strain rate of 10³ s⁻¹.     

紧凑式轧机变形规程优化设计

本文从紧凑式轧机的轧制变形特点出发,分析了其变形规程设计的主要特点和方法,讨论了限制其道次变形量的基本因素,给出了优化设计的目标函数和约束条件。指出,类似这种具有复杂约束的轧制变形问题采用混合罚函数法处理更为有效,并成功地采用该方法进行了变形规程的试设定。     

进一步增强整体开放意识开创我市对外开放工作的新局面

九十年代是中国社会主义现代化建设进程的关键时期。作者从宏观角度提出了青岛市如何进一步增强整体开放意识,开创对外开放工作的设想。对我市今后更好适应我国的经济振兴和社会进步意义重大。     

长输管道外防护层的选择与应用

文章介绍了目前国内外长输管道外防护技术的特点和防护层应用的现状,分析了常用防腐蚀材料的防腐蚀性能。指出在山区复杂地形条件下,应考虑环境条件和施工条件,并通过技术经济分析对管道外防腐蚀层进行合理选择。     

Q195冷轧板材轧制困难原因分析

针对部分Q195冷轧板材存在轧制困难的现象，进行了现场检验与分析。带状组织、混晶现象严重导致变形强化系数偏高是造成轧制困难的主要原因。     

Estimation of errors of hydrogen standard time scale preservation taking account of systematic frequency changes

Metrological characteristics of active hydrogen frequency standards are investigated on the basis of internal and external comparisons. The stability of random changes and drift of hydrogen frequency standards and also the potential capabilities of time scale preservation with effective consideration of systematic changes in their frequency are demonstrated. __________ Translated from Izmeritel’naya Tekhnika, No. 3. pp. 42–45, March, 2007.