Highly efficient switched‐mode transmitter using a current mode class‐D RF amplifier

This article presents a switched‐mode transmitter architecture using a current mode class‐D (CMCD) amplifier. To achieve high average efficiency for a modulated signal the envelope of the complex baseband signal is transformed into pulses such that the CMCD amplifier is operated either at its peak efficiency or completely switched off. The CMCD amplifier has been designed based on single‐tone active harmonic load‐pull measurements to achieve a power‐added efficiency (PAE) of 61.5% with 25 W output power at 900 MHz using LDMOS FETs. Removing the losses of the demodulation filter and of the amplifier a 10% higher efficiency than in an ideal class‐B amplifier can be obtained for burst‐mode operation with a peak‐to‐average power ratio of 10 dB. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

A current‐mode tunable low‐supply‐voltage ring oscillator

A new circuit topology using a current‐mode low‐pass filter for sinusoids has been presented. The technique is relatively simple, in the proposed circuit, only three identical current‐mode low‐pass filters are connected to each other to realize the small signal path. No external passive components are required except for three capacitors. When compared with LC oscillators, the die area of this work, without inductors, is much smaller. When compared with voltage‐mode ring oscillators, the supply voltage of this work is much lower. As a particular example, a 2.4 GHz, 1.2‐V power supply, 5‐mW sinusoidal oscillator is demonstrated. The oscillation frequency is tuned by the value of that three capacitors, over ～900 MHz, and the tuning range is 37.5%. The phase noise results in ?94 and ?120 dBc/Hz at 1 and 10 MHz from the carrier, respectively. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Chattering reduction of sliding mode control by low‐pass filtering the control signal

The conventional approach to reducing control signal chattering in sliding mode control is to use the boundary layer design. However, when there is high‐level measurement noise, the boundary layer design becomes ineffective in chattering reduction. This paper, therefore, proposes a new design for chattering reduction by low‐pass filtering the control signal. The new design is non‐trivial since it requires estimation of the sliding variable via a disturbance estimator. The new sliding mode control has the same performance as the boundary layer design in noise‐free environments, and outperforms the boundary layer design in noisy environments. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Disturbance decoupled fault reconstruction using sliding mode observers

This paper investigates and presents conditions that guarantee disturbance decoupled fault reconstruction using sliding mode observers, which are less stringent than those of previous work, and show that disturbance reconstruction is not necessary. An aircraft model validates the ideas proposed in this paper. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

可靠实现煤矿双机热备系统的方法

在分析商用双机热备系统在煤矿应用的局限性基础上,提出了一种适用于中小煤矿的双机热备系统纯软件实现方法。该方法采用单/双工混合运行模式保证双机实时性能和数据一致性,采用心跳线连接和对等网络消息传递机制实现运行故障监测与传递功能,采用数据自动同步技术减少人工干预和提高系统可维护性,并采用虚拟IP地址技术实现应用层透明访问和无缝切换功能。实验与应用案例证明该方法符合相关行业安全标准并具备现实可行性。     

基于无线网桥的煤矿防火注浆监测系统远程通信的实现

针对现有煤矿防火注浆监测系统有线数据传输方式存在布线复杂、成本高的问题,提出了一种基于无线网桥的煤矿防火注浆监测系统远程通信的实现方案,介绍了无线网桥的3种桥接模式以及无线传输的特点,阐述了基于AX9800 11A无线网桥、采用点对点桥接模式实现济宁二号煤矿防火注浆监测系统远程通信功能的方案。测试结果表明,该方案无线通信的有效距离≥10 km,有效传输速率达10 Mbit/s,视频信号延迟时间≤5 s,数据传输性能可靠,通信质量好。     

计算机专业实践育人模式与基地建设

IT技术与市场的推拉作用,对计算机专业发展提出了更高的要求。本文从实践育人思路入手,设计并完成了多方位的人才培养模式,包括实践课程体系培养模式、产学研合作教育模式、师生传帮带育人模式和学生科技活动模式,并建立了专业实习基地、毕业实习基地、校内技术培训基地和信息创新基地。这些培养模式和实践基地的建设,有力地促进了学生的就业能力和专业兴趣。     

软件工程专业应用型人才培养模式的探索与实践

针对应用型人才培养目标及其在培养过程中存在的突出问题,文章在总结办学经验的基础上,从办学定位、课程体系、质量评价等方面提出了软件工程专业应用型人才培养的一种新型教学模式,突出了应用型人才培养的特色。     

独立学院计算机科学与技术专业实践教学研究

文章通过对瓯江学院信息系计算机科学与技术专业实践教学的基础条件、存在问题和国内外研究现状的总结和分析,指出开展实践教学研究的意义,提出瓯江学院计算机科学与技术专业实践教学的内容、目标和方法,建立适合瓯江学院培养目标的具有特色的实践教学模式,该项研究对瓯江学院信息系计算机科学与技术专业实践教学具有积极指导意义。     

微机原理与应用课程改革与实践

为适应新技术对信息化人才培养要求,在分析微机原理与应用课程特点及教学状况的基础上,从教学目标、教学内容入手,阐述微机原理与应用课程改革思路和方法,从适应科技发展的角度,提出调整课程教学内容,构建微机原理与应用多媒体及网络教学平台系统,改革课程考试方式。