Inverse Analysis of Axisymmetrical Compression of HSLA Steel

The objective of the present work is to further explore the problem of selection of the flow stress function which will give the best agreement with experiments for a wide range of the Zener‐Hollomon parameter. Analysis of various flow stress functions was performed, with particular emphasis on the Zerilli‐Armstrong model. Inverse analysis was successfully applied to identify the flow stress model for microalloyed steels deformed in ferrite, two‐phase and austenite regions. Inverse method is applied to interpret the results of the axisymmetrical compression tests performed for HSLA steel samples on a Gleeble 3800 and Split Hopkinson Pressure Bar. Sensitivity analysis is performed based on local and global methods. The objective of the sensitivity analysis in the present study is the evaluation to what extent the selected coefficients in the rheological model influence the result of simulations. In the considered tests this result is represented by two dependent variables, the load and the shape of the sample (barrelling). It is confirmed that the Zerilli‐Armstrong equations should be applied at very high strain rates. Physical meaning is an advantage of this model. Difficulties with identification are the main disadvantage.     

碳/环氧复合材料的冲击拉伸

该文研究了T300碳纤维单向增强的环氧复合材料,在应变率从10~(-3)/s到10~3/s范围内的冲击拉伸行为.通过对实验数据进行拟合,得出该范围内材料对应变率具有弱的敏感性,表现在破坏强度及破坏应变随应变率增加不显著变化,平均模量几乎不受应变率的影响.分析了试件的几何尺寸效应,讨论了应力波作用对破坏形态的影响以及实验中观察到的拔出现象.从应变率在10~2～10~3/s附近材料行为某些非确定性,指出在更宽范围内了解其性能的必要性.     

高铅硫化铜精矿的二段焙烧

高铅硫化铜精矿进行湿法铜铅分离时，焙烧过程因有低熔点组份产生，使培砂中铜浸出率仅为73％～82％，达不到工艺要求。经二段焙烧后消除了上述影响，铜浸出率达到97．4％，实现了铜铅分离。     

光盘的出错率分析和研究

本文通过对光存储系统出错特性的分析，研究了一些描述出错特性的主要参数，并且给出了描述出错特性的Ｇｉｌｂｅｒｔ模型及其改进型模型。     

EC与~（99m）Tc－GH之间的配体交换反应动力学研究

实验表明，ＥＣ浓度与配体交换反应速度常数无关，体系的ｐＨ值对速度常数和９９ｍＴｃ－ＥＣ的标记率影响较大。测定并计算了不同ｐＨ值的交换反应速度常数。结果表明，为保证用配体交换法制备９９ｍｃ－ＥＣ时９９ｍｃ－ＥＣ的标记率大于９０％，体系的ｐＨ值必须≥８。     

裂纹对石墨烯拉伸力学性能影响的数值仿真

为研究裂纹对石墨烯力学性能的影响,以锯齿型石墨烯为研究对象,基于分子动力学方法,采用Tersoff势函数分析裂纹长度对石墨烯拉伸力学性能的影响以及含有裂纹的石墨烯在不同应变率下的拉伸变形破坏过程.结果表明,裂纹长度的增加大大减小石墨烯的抗拉强度和抗拉应变,对弹性模量有一定影响;裂纹降低石墨烯的抗拉应变对应变率的敏感性,但对于含有裂纹的石墨烯,仍可以增大加载速率来提高石墨烯的抗拉性能.     

一种基于光照变化补偿的颜色识别方法

针对RoboCup中型组足球机器人比赛中光照变化会使颜色发生色彩漂移,影响颜色识别的准确性问题,提出一种基于光照变化补偿的颜色识别方法。该方法首先利用球的历史信息预测球的位置,然后在较小的区域内用基于色调直方图反向投影的方法找到球后,通过球的亮度直方图的变化计算出光照变化率,用于动态补偿颜色查找表。实验表明该方法能提高颜色识别的光照自适应性。     

Environmental Perception with Spatial Regularization Correlation Filter for Visual Tracking

With the introduction of correlation filtering (CF), the performance of visual object tracking is significantly improved. Circular shifts collecting samples is a key component of the CF tracker, and it also causes negative boundary effects. Most trackers add spatial regularization to alleviate boundary effects well. However, these trackers ignore the effect of environmental changes on tracking performance, and the filter discriminates poorly in the background interference. Here, to break these limitations, we propose a new correlation filter model, namely Environmental Perception with Spatial Regularization Correlation Filter for Visual Tracking. Specifically, we use the Average Peak to Correlation Energy (APCE) and the response value error between the two frames together to perceive environmental changes, which adjusts the learning rate to make the template more adaptable to environmental changes. To enhance the discriminatory capability of the filter, we use real background information as negative samples to train the filter model. In addition, the introduction of the regular term destroys the closed solution of CF, and this problem can be effectively solved by the use of the alternating direction method of multipliers (ADMM). Extensive experimental evaluations on three large tracking benchmarks are performed, which demonstrate the good performance of the proposed method over some of the state-of-the-art trackers.     

一种基于网络安全风险评估的入侵检测方法

针对传统的入侵检测系统存在报警数量大、误报率高等缺陷,提出了一种基于网络安全风险评估的入侵检测方法,该方法基于入侵检测结果,引入抗体浓度随入侵强度动态变化这一人工免疫理论的最新研究成果进行网络安全风险的计算,然后根据当前网络面临的实时安全风险动态设置报警策略。实验结果表明,该方法能够实时、定量地计算主机和网络所面临的风险,并极大地降低报警数量和误报率。