Local Strain Measurement within Tendon

Abstract:  Tendon is a dense connective tissue, responsible for transmitting the forces generated by muscles to the skeleton. It is composed of a hierarchical arrangement of crimped collagen fibres, interspersed with proteoglycan matrix and cells, known as tenocytes. During physiological loading, tendons are subjected to strains in the region of 5–6%, which result in the straightening and realignment of the collagen fibres, generating variable local strain fields within the tendon. This study demonstrates a technique for analysing local strains within viable tendon explants, during both loading and unloading of the tissue. Samples were strained in a custom-designed rig, allowing real-time visualisation of cell nuclei, used as local discrete markers, on a confocal microscope. Results indicated that local strains within the fascicle are smaller than the applied strains, never exceeding 1.2%, even at 8% gross applied strain. By contrast, the sliding of adjacent collagen units was recorded at each strain increment in this study, reaching a mean maximum of 3.9% of the applied displacement. Loading–unloading studies indicated that sliding behaviour is reversible up to strains of 5%, and provides the major extension mechanism within the rat-tail tendon. This technique can be extended to further analyse shearing behaviour within the matrix.     

碳纤维复合材料柔性连续抽油杆开发及应用

碳纤维柔性连续抽油杆选用高性能碳纤维 ,以环氧树脂胶液为基体材料 ,添加一定配比的固化剂、促进剂和脱模剂 ,采用拉挤成型工艺制成 ,其开发的关键技术是连续成型、连接接头和安全保险装置。现场应用试验表明 ,TXC— 1、TXC— 2、TXC— 3三种规格的碳纤维柔性连续抽油杆能可靠应用于泵挂深度分别为 12 0 0、 180 0、 30 0 0m的直井和斜井中 ,实测比钢抽油杆节电 ,日产油量提高 。节能增产效果显著。     

API长圆螺纹套管抗粘结性能的试验研究

通过对国内外大量石油套管螺纹参数的测量和全尺寸的模拟试验，以及对测量和试验数据的理论分析，找出了影响国产套管发生粘扣的原因，并在实际生产中实施验证。采取相应的措施改善了套管的抗粘结性能，同时套管的密封和抗滑脱性能并未下降。     

印品质量控制中的密度测量与色度测量

在印刷品质量控制中为了得到更多的可靠数值,越来越多地选择用仪器测量法来代替主观评价法.这就是密度测量法和色度测量法.     

Defining Yield from Bender Element Measurements in Triaxial Stress Probe Experiments

This paper describes the elastic response of a block sample of compressible Chicago glacial clay under a variety of stresses and its relationship with the deformation characteristics at relatively large strains. The elastic shear stiffness was obtained from bender element tests during consolidation and shearing in drained triaxial stress probe tests. An empirical correlation was established based on the elastic shear stiffness in a preyield condition. By comparing the empirical correlation with the measured elastic shear stiffness in the stress region during probing, the changes of elastic shear stiffness were investigated. The departure of elastic shear stiffness from values computed by the empirical relation based on K0 loading directly relates to the yielding characteristics of the clay. The large-scale change of soil structure at yielding alters the well-established relationship between the elastic shear stiffness and stresses in the preyield condition. The mechanical yielding response of clays can be detected based on the systematic analysis of the elastic shear wave velocities.     

An analysis of shielding against DC magnetic fields generated by electric railways. Evaluation of effective permeability of fine structure

This paper describes an effective analysis of magnetic shielding based on homogenization. The analyses become time‐consuming if the problems include the magnetic substances having fine structure. The homogenization of the structure makes it possible to analyze effectively the magnetic fields. The authors introduce a method to estimate the effective permeability of the homogenized substance. This method can be applied to any periodic structure made of magnetic substance. The magnetic shielding effects by the structures against direct‐current (DC) fields generated by electric railways are analyzed by using the present method. As a result, it is found that the overhead way and the protective fence near the railway work as a magnetic shield, whose effects can be improved by appropriate arrangement of those constructions. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(4): 7–15, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20310     

逆向反射镜光度测量

为了正确评价逆向反射镜的加工质量与使用效果，且将二者有机地统一起来，本文提出应根据测试目的来选择合适的光度测量方法，并进一步分析了不同测试目的将导致测量装置的组成、几何条件（距离，孔径角，工作姿态等）、光度条件（光源色温、稳定性与均匀性，接收器线性、灵敏度与光谱修正等）、测量参数（反光强度系数、逆反射系数、逆亮度系数等）等各不相同。     

Implementing software metrics — the critical success factors

This paper reviews the current state of industry with regard to the introduction of software metrics. It discusses the benefits that organizations have derived from metrication, it looks at why organizations have sought to introduce metrics programmes, how they have gone about introducing those programmes and the problems that they have encountered during implementation. The review found that, on the whole, only the sanitized aspects of metrics experiences have actually been published. This seems to be especially the case with respect to practitioner resistance. Very few organizations admit to having encountered resistance during the introduction of a metrics programme. The paper also includes the results of a pilot study, conducted by the first author, which examines the attitudes that developers hold towards the introduction of software metrics. The key findings of this pilot study are that positive attitudes to metrics correlate highly with levels of education and to job satisfaction.