A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

工业PTA氧化过程4-CBA浓度的模糊神经网络模型

A fuzzy neural network (FNN) model is developed to predict the 4-CBA concentration of the oxidation unit in purified terephthalic acid process. Several technologies are used to deal with the process data before modeling.First,a set of preliminary input variables is selected according to prior knowledge and experience. Secondly,a method based on the maximum correlation coefficient is proposed to detect the dead time between the process variables and response variables. Finally, the fuzzy curve method is used to reduce the unimportant input variables.The simulation results based on industrial data show that the relative error range of the FNN model is narrower than that of the American Oil Company (AMOCO) model. Furthermore, the FNN model can predict the trend of the 4-CBA concentration more accurately.     

Spline multiresolution and wavelet-like decompositions

Splines are useful tools to represent, modify and analyze curves and they play an important role in various practical applications. We present a multiresolution approach to spline curves with arbitrary knots that provides good feature detection and localization properties for non-equally distributed geometric data. In addition, we show how equidistributed data and knot sequences can be efficiently handled using signal processing techniques.     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.     

基于微观孔隙通道的饱和/非饱和土渗透系数模型及其应用

从微观角度揭示土体变形对饱和/非饱和渗透系数的影响机理,建立相应的预测方法,对于饱和/非饱和土的渗流分析及水力耦合研究具有重要的科学意义。利用流体力学理论,建立了微观孔隙通道渗透系数与等效孔径的关系,在此基础之上,结合毛细理论建立了饱和/非饱和渗透系数与土-水特征曲线的关系模型,并利用已有试验数据验证了模型的合理性。结合该模型与变形条件下土-水特征曲线预测方法,对变形条件下武汉黏性土饱和/非饱和渗透系数进行预测,结果表明黏性土在压缩变形条件下:饱和渗透系数呈数量级的减小,预测值与实测值均吻合较好;双对数坐标下,非饱和相对渗透系数在进气值之后随基质吸力增加而减小,不同初始孔隙比条件下其斜率近似不变,整体呈现"毛刷型"分布,相同基质吸力条件下,初始孔隙比越小,相对渗透系数越大;非饱和渗透系数,进气值之前近似为饱和渗透系数,进气值之后随基质吸力增大而减小,不同初始孔隙比的变化线近似重合。     

定量校准曲线法测定超高纯试剂丙酮中铁含量的研究

目前最常用的分析曲线法(标准曲线法、校准曲线法)、内标法、标准加入法等,对丙酮这类基体成分丰富的样品测定,其定量校准存在显著的系统误差.实验证实,通过保证标准系列中基体组成、浓度及酸度与待测样基本相同,来制作工作曲线进行定量校准(下称定量校准曲线法),能得到较为理想的结果.     

塑料充模流动粘性模型研究

对多种塑料在不同温度下的剪切速率一稳态剪切粘度数据进行Cross粘性模型参数拟合，得到了表征材料粘度的模型参数(B，Tb，τ^*，n)。其拟合效果良好，能较准确地描述塑料熔体在一定剪切速率和温度范围内的粘流特性，为工程计算和塑料熔体模流分析提供了数据支持。结果表明，该方法有较广泛的适用性。     

指数曲线贮仓的设计剖析

贮仓是许多工业过程中的常用设备，起拱是贮仓使用时常出现的故障，如何解决起拱问题是贮仓设计的关键，除常采取增大仓壁倾角、设置破拱装置等方法外，设计成曲线贮仓也是行之有效的措施之一。分析了指数曲线贮仓的工作原理和特点，建立了仓壁指数曲线方程，阐述了设计步骤与注意事项，并举例说明。