小曲率轿车覆盖件拉深模设计

在分析小曲率轿车覆盖件成形特点的基础上，指出采用阶梯拉深是提高材料塑性变形、减少回弹的有效措施，并以一个典型零件——前盖外板为例，设计了其拉深J-艺补充面，并给出了有限元模拟结果以验证有效性。     

大学学科课程研究性教学模式的构建

大学学科课程研究性教学模式主要适用于专业核心课程的教学。它的核心理念是人本教学理念、权变中心理念、主体有序互动理念和发展性能力养成理念 ;主要方式是基本知识与经典理论交往式教学、课题研究汇报教学和课题研讨评点教学 ;目标指向是学生的发展性能力养成。     

Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials

A variety of metallic powder particles were thermally sprayed onto the mirror polished metallic substrate surface and the effect of both substrate temperature and ambient pressure on the flattening behavior of the particle was systematically investigated. In the flattening behavior of the sprayed particle onto the substrate surface, critical conditions were recognized both in the substrate temperature and ambient pressure. That is, the flattening behavior changed transitionally on that critical temperature and pressure range, respectively. A transition temperature, T _t, and transition pressure, P _t, were defined and introduced, respectively for those critical conditions. The fact that the dependence of both transition temperature and transition pressure on the sprayed particle material had similar tendency indicated that the wetting of the substrate by the molten particles seemed to be a domination in the flattening. Three-dimensional transition curvature by combining both transition temperature and transition pressure dependence was proposed as a practical and effective controlling principle of the thermal spray process. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

基于曲率匹配和递归排序的自适应排样算法

为提高盘状毛坯的使用率,提出一种口腔修复加工中模型边界在盘状毛坯中的排样算法,主要包括边界匹配、多边形定位及递归排序.首先基于协方差矩阵及矩阵SVD分解算法对模型多边形进行分段,并采用等弧长曲线采样曲率匹配确定待匹配模型边界;然后依毛坯边界角度分布及沿圆周排样的思想确定模型轮廓的旋转和平移定位;最后提出一种基于包络率的递归排序算法,对在排样过程中发现的大孔洞可动态地调整排样顺序.实验结果表明,该算法可以处理不规则模型边界在任意形状毛坯中的排样,能有效地降低加工成本.     

Quantification model of proper curvature for large‐sized curved TVs

We present a feasible modeling method to estimate the proper curvature for large‐sized curved TVs. We especially focused on two factors – preference and perceived distortion – to be considered to determine the proper curvature. The preference includes a number of advantages that people expect to fulfill the possibilities of a more immersive image and sense of realism from curved display. On the other hand, the perceived distortion means the side effects that people can notice uncomfortable feeling caused by the shape of a curved one. In order to find out how two factors would be different as a number of conditions like curvature, size, and viewing angle change, a series of subjective assessments were conducted. The evaluation results show that both the preference and perceived distortion vary with the conditions considerably. We performed the statistical analysis based on the results and proposed the quantification model of proper curvature, which has higher preference and less perceived distortion, for various‐sized curved TVs.     

Coherent microscopy by laser optical feedback imaging (LOFI) technique

The application of the non-conventional imaging technique LOFI (laser optical feedback imaging) to coherent microscopy is presented. This simple and efficient technique using frequency-shifted optical feedback needs the sample to be scanned in order to obtain an image. The effects on magnitude and phase signals such as vignetting and field curvature occasioned by the scanning with galvanometric mirrors are discussed. A simple monitoring method based on phase images is proposed to find the optimal position of the scanner. Finally, some experimental results illustrating this technique are presented.     

When Disaster Strikes

The importance of securing data against the threat of natural disasters i s something most MIS managers don't realize until it's too late. This column describes how two fires and an earthquake adversely affected several companies that were unprepared, or only partially prepared, for such disasters. It also discusses disaster recovery measures some MIS executives believe their companies should strengthen not only to protect the data center but to reduce their employees risk of losing valuable informa- tion from office files.     

Topological and Variational Properties of a Model for the Reconstruction of Three-Dimensional Transparent Images with Self-Occlusions

We introduce and study a two-dimensional variational model for the reconstruction of a smooth generic solid shape E, which may handle the self-occlusions and that can be considered as an improvement of the 2.1D sketch of Nitzberg and Mumford (Proceedings of the Third International Conference on Computer Vision, Osaka, 1990). We characterize from the topological viewpoint the apparent contour of E, namely, we characterize those planar graphs that are apparent contours of some shape E. This is the classical problem of recovering a three-dimensional layered shape from its apparent contour, which is of interest in theoretical computer vision. We make use of the so-called Huffman labeling (Machine Intelligence, vol. 6, Am. Elsevier, New York, 1971), see also the papers of Williams (Ph.D. Dissertation, 1994 and Int. J. Comput. Vis. 23:93–108, 1997) and the paper of Karpenko and Hughes (Preprint, 2006) for related results. Moreover, we show that if E and F are two shapes having the same apparent contour, then E and F differ by a global homeomorphism which is strictly increasing on each fiber along the direction of the eye of the observer. These two topological theorems allow to find the domain of the functional ℱ describing the model. Compactness, semicontinuity and relaxation properties of ℱ are then studied, as well as connections of our model with the problem of completion of hidden contours.

平均曲率运动的三种实现方案的比较研究

讨论了曲率运动演化方程的三种数值方案:离散中值滤波方案、显式水平集方案和半隐式水平集方案的原理与算法,并对它们的效率、精度以及旋转不变性等性能进行了对比实验研究.结果表明,半隐式加性算子分裂(AOS)算法相对于另两种方案性能上明显占优.     

基于曲率流的点模型编辑方法*

为了对点模型表面进行保细节的自由形状编辑,提出了一种基于曲率流的点模型形状编辑方法。该方法定义了基于平均曲率流的光顺算子,通过此光顺算子获得点模型不同光滑程度的曲面表示。运用对应曲面上点之间的向量差进行相应几何细节的抽取,在相邻的曲面表示之间将几何细节剥离出来。用户可以在不同的曲面上进行自由形状编辑,而无须关心几何细节。在变形后的曲面上再将相应的几何细节映射回去,实现对模型保细节的变形。实验结果表明该方法是一种有效的点模型造型算法,在变形的同时,有效地保持了模型表面的细节特征。