Flash存储器技术与应用

本文主要介绍了Ｆｌａｓｈ存储器的特性及其存储技术，并探讨了Ｆｌａｓｈ存储器的应用领域。     

氢对2.25Cr-1Mo压力容器用钢力学性能影响

基于试样高温高压釜充氢方法 ,研究了氢对 2 2 5Cr 1Mo压力容器用钢力学性能的影响。对充氢前后的试样进行了拉伸和CVN冲击试验 ,结果表明 ,氢对 2 2 5Cr 1Mo钢的拉伸力学性能和冲击韧性影响不显著。     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.     

电脉冲快速退火对铁基非晶合金性能的影响

采用大电流交流脉冲对非晶Ｆｅ７８Ｂ１３Ｓｉ９合金进行了去应力退火。初步探讨了电脉冲加热对加热速率和该合金内应力释放、退火脆化以及最终软磁性影响的基本规律。结果表明：电脉冲加热可以得到远高于常规退火的加热速率，选择合适工艺参数可使非晶合金内应力释放９０％，软磁性（Ｈ＿ｃ和Ｂ＿ｓ）达常规退火后的９５％以上，与此同时使合金的延性（断裂应变ε＿ｆ）维持在０．９以上，从而有望实现非晶合金磁性与延性的合理配合。     

膛阻与小口径弹道炮弹道特性变化的分析

小口径弹道炮在使用初期,弹道特性值偏高,影响产品的验收和标准弹的鉴选.该文用膛阻理论解释弹道炮使用的各个时期的弹道特性变化,并介绍了“光膛”射击后,在弹道曲线下降段进行产品验收以及标准弹鉴选中的实际应用.     

偶联剂对玻璃纤维/环氧基复合材料界面介电性能的影响研究

本文研究了五种偶联剂对玻璃纤维浸润性能和玻璃纤维/环氧基复合材料界面介电性能的影响。结果表明,玻璃纤维经偶联剂处理后,其浸润活化能降低,与环氧树脂基体间的相容性及化学反应活性得到改善;因此赋予了玻璃纤维与环氧基体间以良好的界面粘结性能,从而提高了玻璃纤维/环氧基复合材料界面的介电性能。其提高的幅度大小与偶联剂的极性及化学结构有关。     

铝塑复合板用铝带材工艺控制要点简析

铝塑复合板用铝带材是我公司的主要产品。本文主要介绍该产品实际生产中遇到的主要问题（板形、表面质量、折弯性能）及相应的解决措施。     

复合超细丙纶及应用

对国内外细旦丙纶的开发和发展进行了介绍，阐述了单丝纤度为０．１～０．５ｄｔｅｘ的复合超细丙纶的制造方法、原材料规格、复合剥离技术以及产品质量。重点讨论了复合超细丙纶及织物的舒适性、染色性和卫生性，应用于织造、服装领域。     

Influence of Rare-earth Elements on Mechanical Properties of Palladium

The influence of 0.1-0.6 at.-%RE additions (RE= La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb) on themechanical properties of Pd was studied. All above RE additions increased not only the strengthproperties at ambient temperature but also the tensile strength, creep rupture time and activation en-ergy at high temperatures, simultaneously increased the elongation of Pd. In the range of dilute con-centration, the strength properties of Pd-RE alloy enhanced linearly with RE concentration. Whenthe strength properties of Pd-RE alloys were normalized at 0.1 at.-%RE, it was found that light REelements had stronger effect on the properties of Pd than heavy RE, whereas Eu, Yb, Ce had anoma-lous effect. In all Pd-RF alloys, Pd-Eu alloy had the highest strength properties, successively Pd-Yband Pd-Ce alloy. The effect mechanisms of RE in alloy, such as purifying impurities, increasingrecrystallization temperature, refining grain size. expanding crystal lattice, increasing dislocation den-sity and decreasing stacking fault energy, forming stable RE oxidation by internal oxidation, and soon, were observed. They were strengthening sensitive factors. The influence of the factors onstrength properties and elongation of Pd was discussed.     

激光熔覆用钴基合金粉末的研究

对激光熔覆用WFLC－11钴基合金粉末的激光熔覆工艺和熔覆层性能进行了研究，获得了WFLC－11钴基合金粉末激光熔覆层厚度与最小比能量关系曲线和熔覆层的组织、高温硬度等性能数据，为选择和使用WFLC－11钴基合金粉末提供了依据。