电解铝侧插自焙槽技术改造与环境保护

电解铝侧插自焙槽属于落后的生产工艺，由于其能耗高、物料消耗大、劳动强度大、环境污染严重，在国内电解铝中已开始进行大规模的淘汰改造。采用先进的预焙电解槽生产技术，降耗节能、改善生产劳动强度，环境污染得到有效治理，各项环境指标达标排放，经济技术指标提高，食业面貌发生了巨大大变化。     

炼厂碱渣处理工艺及设计优化

针对催化裂化装置汽油和液态烃精制产生的含硫废弃物的碱渣处理，讨论了碱渣提酚、碱渣湿式氧化脱臭两种处理工艺的环境治理效果，并就碱渣湿式氧化脱臭工艺如何降低运行成本、减少污水排放等内容进行了探讨。     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

重庆荣昌夏布的原产地保护与技术自主创新

荣昌夏布具有原产地保护产品的特征，对该产品实施原产地保护工作存在的主要问题为没有统一的生产标准、产品结构单一及产品技术含量不高等。对此问题的解决，一方面要依靠政府的力量．另一方面企业自身要不断实现技术自主创新。     

铝合金电火花线切割加工工艺研究

通过对铝合金高速走丝电火花线切割加工的工艺设计，探讨了其加工的工艺特点，分析了不同的进给速度、工作液及电参数对加工工艺指标的影响，并提出了改善铝合金高速走丝线切割加工工艺性能的措施。     

关于职业技术学院英语教学的思考

为了适应新形势、新需求，根据职业技术教育的实践，探讨如何调动学生英语学习的积极性，激发学生的学习动力，以改变被动学习和由此而产生的逆反心态，使英语学习收到好的效果。     

A process-control and diagnostic tool based on continuous fuzzy Petri nets

The use of Petri nets and fuzzy logic in intelligent process control has caught the attention of many researchers. In this paper, a Continuous Fuzzy Petri Net (CFPN) tool which integrates the three technologies of fuzzy control, Petri nets and real-time expert systems is presented. The CFPN approach can deal with real-time continuous inferencing, for the purpose of process monitoring and diagnostics, at a high level in the presence of uncertainty. This tool has been implemented in the G2 real-time expert-system environment and is currently being used by ESSO Canada.     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。     

依缓冲库调速CIMS可靠性分析的位相结构方法

本文提出了依缓冲库调速ＣＩＭＳ可靠性分析的位相结构方法，从闭环排队网络出发，利用准生灭过程理论，给出了系统的各种可靠性指标和生产指标，讨论了系统局部运行期的们相特征，最后给出了两个数据算例。     

不适定热传导反问题的两种求解方法及其比较

本文以不适定热传导反问题为对象，采用两种方法进行了求解。一种方法基于对具有测量误差的边界条件进行适当的微扰，使之化为适定问题；另一种方法基于Ｔｉｋｈｏｎｏｖ的正则平滑思想，对反问题中的输入数据进行平滑处理，以便使函数及其一阶导数均实现一致逼近。通过计算与求解表明，两种方法均能得到具有一定精度与稳定性的结果，其中以正则化法更为理想