Ni-P化学镀层的塑脆性能研究

利用单摆划痕法的动态加载特性，研究了Ni-P化学镀层本身的塑脆性能。分析讨论了磷含量和热处理温度对镀层的塑脆性能影响。临界划痕深度D‘、临界法向力Fnc和划痕断裂韧性Kc‘在衡量镀层塑脆程度方面是一致的，其中，D‘和Fnc可作为塑脆转变判据。     

在线布流调节影响铸嘴型腔熔体流场和温度场的研究

建立了在线布流调节时铸嘴型腔熔体非定常流动和传热数学模型，应用数值方法仿真分析了入口速度斜坡变化时铸嘴型腔流场、温度场、压力场的动态演化过程。结果表明，对型腔进行在线布流调节来改善铸嘴型腔流场、温度场是可行的。     

无缝管轧制变形区内金属流动和摩擦力的实验研究

用自行设计的实验装置真实描述出无缝管轧制变形区内单位轧制力，纵、横向摩擦力的分布规律，绘制出变形区各点的摩擦力分布和金属流动轨迹图。     

大变形零件温挤压凹模型孔设计技巧

对大变形程度、圆坯正挤压出两种变截面挤压方式进行了工艺和质量对比，在凹模型孔形式上采用了双锥角模口导流方式，第一次提出了在挤压初始阶段，利用双锥角形成大的材料初始流速和流动惯性来克服流动前期变形抗力峰值以达到模口材料周边匀速流动目的的理论。     

发泡模具射料充填过程的数值模拟

本文利用商业流体分析软件对多种情况下发泡模具的射料充填过程进行了数值模拟,物理模拟利用数码摄像机记录下射料充填的全过程,数值模拟结果与物理模拟结果对比表明,模拟的结果与实际情况基本上是一致的.     

含菌介质中MDOPD对SRB菌及生物膜腐蚀的抑制作用

用动电位扫描极化曲线、原子力显微镜和电子探针等方法研究了SRB生物膜在培养基介质中对于含咪唑杂环的双季铵盐化合物MDOPD的敏感性．结果表明：含菌介质中，MDOPD吸附在电极表面，形成完整致密的有机保护膜，对电极的腐蚀反应具有良好的抑制作用，SRB的代谢及腐蚀产物也难以在电极表面直接吸附和沉积，从而降低了SRB生长代谢的次生过程（包括酸浸蚀等）对腐蚀的促进作用；同时也降低了介质中的SRB参与碳钢腐蚀的机会．     

Influences of temperature and Sn-addition on microstructural evolution of Ag during FSW

ABSTRACT

The microstructural evolutions of pure Ag and Ag-0.75 wt-%Sn during rapid cooling friction stir welding (FSW) were examined. At the lower welding temperature of FSW conditions, the annealing twinning was highly suppressed and the microstructural evolution was dominated by the discontinuous dynamic recrystallisation (DDRX) via the high angle boundary (HAB) bulging. The fully recrystallised microstructure was remarkably finer than that formed through the frequent annealing twinning at the higher welding temperature. Moreover, the Sn-addition caused the HAB bulging due to the inhibition of dynamic recovery and decreased mobility of grain boundaries. With decreasing the ratio of the peak temperature to the recrystallisation temperature, the dominant grain refinement mechanism is implied to change from the annealing twinning to the DDRX.     

GCr15钢汽车水泵芯轴早期失效分析

通过金相分析及硬度检测 ,对GCr1 5钢汽车芯轴早期断裂进行了综合分析。结果表明 ,芯轴早期失效主要原因是淬火组织过热引起的沿晶开裂以及磨削裂纹所致     

The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)

Direct laser deposition (DLD) is an additive manufacturing process that builds up a part layer-by-layer by fusing metal powder to a solid substrate. A coaxial laser and powder delivery head is commonly used, and here a critical process variable is the standoff distance between the nozzle and the material deposition point. This contribution investigates the role of this variable and the effect that it has on the final part geometry. The experimental results show that good layer consistency can, in fact, be obtained with no movement of the substrate between layers for more than 20 layers, or 10 mm under tested conditions, and that poorer results are obtained by regular movement of the substrate by a badly chosen constant amount. A theoretical analysis of the situation establishes a method to estimate melt pool size using an analytically calculated temperature near the heat source. Based on this, simple heat and mass flow models are established to allow some of the results to be explained.     

COMPUTERIZED SIMULATION OF MOLTEN SALT SOLUTION OF Li,KF,Cl SYSTEM BY MOLECULAR DYNAMIC METHOD

The structure and properties of molten salt solution o J Li,K|F,Cl system have been investigedby computerized simulation of molecular dynamic method.The partial RDF,the partial molarenergy of mixing and the diffusion coeffients of Li~+,K~+,F~- and Cl~- have been calculated.The results are in agreement with the experimental values.The regularities of the distributionof ions and mieroscopic holes are discussed based on the results of computerized simulation.