Developing real-time knowledge-based systems with PERFECT

PERFECT (Programming EnviRonment For Expert systems Constrained in reasoning Time) is aimed at providing the necessary engineering support in real-time knowledge-based system development. PERFECT bridges the gap between the traditional analysis and design methodologies, and the implementation tools for these systems. It does so by providing the means to construct a knowledge model and to choose a suitable inference strategy. Subsequently the properties of the knowledge model and inference strategy may be analysed. For instance, it may be checked whether the knowledge model contains sufficient knowledge to diagnose a fault in an industrial process. Moreover, it may be checked whether the inference engine is able to provide an answer to a certain problem in time. If not, the analyser of PERFECT proposes an alternative structure of the knowledge model. When the constructed knowledge model and the chosen inference strategy show the required time efficiency, the compiler of PERFECT may translate them to an actual real-time knowledge based system in COGSYS. In addition, guidelines are provided with respect to the design of the human-machine interface. The resulting system is an instrument—a source of information that can be used by the human operator during problem-solving, rather than a prosthesis—a device that solves the entire problem by itself and presents the outcome to the human operator.     

THE APPLICATION OF COKELET''''S WAVE THEORY IN THE CALCULATION OF WAVE-CURRENT FIELD

By using Cokelet's wave theory,the limiting wave height and the relative waveangular frequency in wave-current field were calculated in this paper.It is indicated by numeri-cal calculation that if the water depth is not too small,the result given by authors'calculationare very close to the results of limiting wave height by Dalrymple(1975)and to the data of rel-ative wave angular frequency by linear wave theory;but if water depth is rather small,thereare some discrepancy,     

三维目标旋转畸变不变光学相关滤波器组的设计

研究了三维目标旋转畸变不变光学相关滤波器组的设计原理，完成了滤波器组参数的计算和编码，以及光学相关识别的计算机模拟。     

异型材挤出口模内的流动模拟

本文根据挤出机理，对口模内的流动行为进行适当的简化和假定，建立了挤出口模内流动分析的数学模型，并采用横截面／假想区域法实现了复杂异型材挤出口模内的数值模拟，数值分析结果与三维有限元解和解析解的对比，取得了满意的效果。     

60MHz相位介电测井仪模拟刻度器设计

文章以介电测井理论为基础，借鉴感应仪的模拟刻度方法，对大庆油田的６０ＭＨｚ相位介电井仪的模拟刻度进行了研究。参照国内外有关资料，提出了模拟刻度器的设计模型，通过理论分析与计算，建立了一套模拟刻度方法。现场初步试验，该方法取得了一定物效果，为进一步提高仪器的测量精度提供了依据。     

计算机模拟技术在小型梯级电站群中优化运行的研究

研究了渠道梯级电站群的运行特点，在分析基础上建立了这类电站群化高度的分解协调模型，并采用模拟和动态规划相结合的方法，求解了海南松涛灌区５级电站群的优化调度问题．且求解优化模型的基础上对渠道梯级电站群系统和站内运行提出了具体的调控规则．     

20K以下温区单级脉管制冷机直流控制实验研究

开展了20K以下温区单级脉管制冷机的实验研究，考察了直流流动对制冷机性能的影响，估算了不同制冷温度下制冷机循环的需气量，在对直流进行控制的情况下，采用2kW(RW2)和4kW(CP4)压缩机分别获得了18．7K和14．7K的最低制冷温度，对应的在30K的制冷量分别为10W和29．5W。     

再论变化电磁场中带电超微粒子的精确量子论

利用创新的SU(1 ,1 )Lie代数理论及SO(3)Lie代数理论 ,得到变化电磁场中带电超微粒子的精确量子论 ,由此进一步明确微观领域中的时空概念     

NUMERICAL SIMULATION OF PARTICLE SEPARATION IN AN OIL-SAND SEPARATOR

ＮＯＴＡＴＩＯＮＳＡ　Ａｒｅａｏｆｉｎｌｅｔ ,ｍ2ａ　Ｃｅｎｔｒｉｆｕｇａｌａｃｃｅｌｅｒａｔｉｏｎ ,ｍ2 /ｓｉ　Ｇｒｉｄｏｆａｘｉａｌｄｉｒｅｃｔｉｏｎｍｌ 　ＭａｘｉｍｕｍｇｒｉｄｎｕｍｂｅｒｏｆｒａｄｉａｌｄｉｒｅｃｔｉｏｎＱ　Ｆｌｕｉｄｍａｓｓｒａｔｅ ,ｍ3/ｓＲｃ 　Ｍａｘｉｍｕｍｒａｄｉｕｓｏｆｃｙｃｌｏｎｅ ,ｍＲｅ　Ｒｅｙｎｏｌｄｓｎｕｍｂｅｒｒ　Ｄｉｍｅｎｓｉｏｎｌｅｓｓｒａｄｉａｌｄｉｓｔａｎｃｅｔ　Ｄｉｍｅｎｓｉｏｎｌｅｓｓｔｉｍｅｕ　Ｄｉｍｅｎｓｉｏｎｌｅｓｓａｘｉａｌｖｅｌｏｃ…     

A new method of preform design in hot forging by using electric field theory

The preform design in metal forging plays a key role in improving product quality, such as ensuring defect-free property and proper metal flow. In industry, preforms are generally designed by the iterative trial-and-error approach. This approach, however, leads not only to the increase of significant tool cost but also to the extended down-time of the production equipment. It is thus necessary to reduce time and man power through an effective method of preform design. In this paper, the equi-potential lines designed in the electric field are introduced to find an appropriate preform shape. The equi-potential lines generated between two conductors of different voltages show similar trends for the minimum work paths between the undeformed shape and the deformed shape. Based on this similarity, the equi-potential lines obtained by the arrangement of the initial and final shapes are utilized for the design of the preform, and then the artificial neural network is used to find the range of initial volume and potential value of the electric field.